Hi Neil. On Mon, Sep 07, 2020 at 03:24:47PM +0200, Neil Armstrong wrote: > Hi, > > On 07/09/2020 13:45, Sam Ravnborg wrote: > > Hi Neil. > > > > On Mon, Sep 07, 2020 at 01:10:26PM +0200, Neil Armstrong wrote: > >> This add the bindings for the 1024*600 tl070wsh30 DSI panel. > > > > The binding looks like a panel-simple-dsi.yaml candidate. > > Only differen is enable-gpios versus reset-gpios > > This is the only difference, the panel only has a reset signal and no > enable signal. > > But I can add a reset-gpios to panel-simple-dsi.yaml, would it be ok ? Yes, that would be fine as long as it is not a required property. It was a mistake we did not add it from the beginning. There has been patches floating to add reset-gpios to panle.simple.c that I rejected - this was also wrong. Really simple and dumb panels has no reset but dsi panels that panel-simple supports too has a reset. Sam > > Neil > > > > > Could you check if we can use panel-simple-dsi-yaml. > > > > Sam > > > >> > >> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > >> --- > >> .../display/panel/tdo,tl070wsh30.yaml | 58 +++++++++++++++++++ > >> 1 file changed, 58 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml > >> > >> diff --git a/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml b/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml > >> new file mode 100644 > >> index 000000000000..20f4fdedfcb0 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/display/panel/tdo,tl070wsh30.yaml > >> @@ -0,0 +1,58 @@ > >> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) > >> +# Copyright 2020 BayLibre, SAS > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/display/panel/tdo,tl070wsh30.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: TDO TL070WSH30 DSI panel > >> + > >> +maintainers: > >> + - Neil Armstrong <narmstrong@xxxxxxxxxxxx> > >> + > >> +allOf: > >> + - $ref: panel-common.yaml# > >> + > >> +properties: > >> + > >> + compatible: > >> + enum: > >> + - tdo,tl070wsh30 > >> + > >> + reg: > >> + maxItems: 1 > >> + description: DSI virtual channel > >> + > >> + backlight: true > >> + reset-gpios: true > >> + port: true > >> + power-supply: true > >> + > >> +additionalProperties: false > >> + > >> +required: > >> + - compatible > >> + - power-supply > >> + - reset-gpios > >> + - port > >> + - reg > >> + > >> +examples: > >> + - | > >> + dsi { > >> + #address-cells = <1>; > >> + #size-cells = <0>; > >> + panel@0 { > >> + compatible = "tdo,tl070wsh30"; > >> + reg = <0>; > >> + power-supply = <&vcc_lcd_reg>; > >> + backlight = <&panel_backlight>; > >> + reset-gpios = <&gpio_reset>; > >> + > >> + port { > >> + panel: endpoint { > >> + remote-endpoint = <&mipi_dsi_out>; > >> + }; > >> + }; > >> + }; > >> + }; > >> -- > >> 2.22.0 > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
