[PATCH v5 70/80] drm/vc4: hdmi: Remove register dumps in enable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The current code has some logic, disabled by default, to dump the register
setup in the HDMI controller.

However, since we're going to split those functions in multiple, shorter,
functions that only make sense where they are called in sequence, keeping
the register dump makes little sense.

Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Tested-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Tested-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
Tested-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 5e479647559f..3c7862a1dda8 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -430,7 +430,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 	struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder);
-	bool debug_dump_regs = false;
 	unsigned long pixel_rate, hsm_rate;
 	int ret;
 
@@ -489,14 +488,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	if (vc4_hdmi->variant->phy_init)
 		vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
 
-	if (debug_dump_regs) {
-		struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
-
-		dev_info(&vc4_hdmi->pdev->dev, "HDMI regs before:\n");
-		drm_print_regset32(&p, &vc4_hdmi->hdmi_regset);
-		drm_print_regset32(&p, &vc4_hdmi->hd_regset);
-	}
-
 	HDMI_WRITE(HDMI_VID_CTL, 0);
 
 	HDMI_WRITE(HDMI_SCHEDULER_CONTROL,
@@ -522,14 +513,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 
 	HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);
 
-	if (debug_dump_regs) {
-		struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
-
-		dev_info(&vc4_hdmi->pdev->dev, "HDMI regs after:\n");
-		drm_print_regset32(&p, &vc4_hdmi->hdmi_regset);
-		drm_print_regset32(&p, &vc4_hdmi->hd_regset);
-	}
-
 	HDMI_WRITE(HDMI_VID_CTL,
 		   HDMI_READ(HDMI_VID_CTL) |
 		   VC4_HD_VID_CTL_ENABLE |
-- 
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux