Even though it's not really clear why we need to flush the PV FIFO during the configuration even though we started by flushing it, experience shows that without it we get a stale pixel stuck in the FIFO between the HVS and the PV. Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> Tested-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> Tested-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx> Tested-by: Stefan Wahren <stefan.wahren@xxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index 73d918706f7e..00b2c2b011d1 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -358,7 +358,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc) if (is_dsi) CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep); - CRTC_WRITE(PV_CONTROL, + CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR | vc4_crtc_get_fifo_full_level_bits(vc4_crtc, format) | VC4_SET_FIELD(format, PV_CONTROL_FORMAT) | VC4_SET_FIELD(pixel_rep - 1, PV_CONTROL_PIXEL_REP) | -- git-series 0.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
