On Thu, Aug 20, 2020 at 12:27:03PM +1000, Sam McNally wrote: > > > [...] > > > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c > > > index 1ac874e4e7a1..73a2299c2faa 100644 > > > --- a/drivers/gpu/drm/drm_dp_mst_topology.c > > > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c > > > @@ -2161,11 +2161,23 @@ static void build_mst_prop_path(const struct drm_dp_mst_branch *mstb, > > > int drm_dp_mst_connector_late_register(struct drm_connector *connector, > > > struct drm_dp_mst_port *port) > > > { > > > + int ret; > > > DRM_DEBUG_KMS("registering %s remote bus for %s\n", > > > port->aux.name, connector->kdev->kobj.name); > > > > > > port->aux.dev = connector->kdev; > > > - return drm_dp_aux_register_devnode(&port->aux); > > > + ret = drm_dp_aux_register_devnode(&port->aux); > > > + if (ret) > > > + return ret; > > > + > > > + if (port->pdt != DP_PEER_DEVICE_NONE && > > > + drm_dp_mst_is_end_device(port->pdt, port->mcs)) { > > > > How can we get here when drm_dp_mst_is_end_device(port) is not true? > > AFAICS that's only case where we should create a connector and an i2c > > device. (IOW we don't create them for branch ports.) > > I'm not sure what you mean. Wouldn't this condition be checked during > the registration of any MST connector? This follows the pattern used > in drm_dp_mst_port_add_connector() [0], which seems like it's invoked > in the same cases as drm_dp_mst_connector_late_register(), modulo > early outs for errors. Re-reading the code, a DRM connector is created whenever the MST port is an output port, so even in the case of an output branch port. I'm still not sure why we can't register/unregister the I2C bus whenever creating/removing the DRM connector. That's also the scope of the AUX bus, which is what I2C depends on, and if a port doesn't support I2C messaging then the corresponding AUX messages would be NAKed. --Imre > > [0] https://cgit.freedesktop.org/drm-tip/tree/drivers/gpu/drm/drm_dp_mst_topology.c?id=1939e049a8ec6cef03a098f7cc99cb0bbcff21c6#n2188 > > > > > > + ret = sysfs_create_link(&port->connector->kdev->kobj, > > > + &port->aux.ddc.dev.kobj, "ddc"); > > > + if (ret) > > > + drm_dp_aux_unregister_devnode(&port->aux); > > > + } > > > + return ret; > > > } > > > EXPORT_SYMBOL(drm_dp_mst_connector_late_register); > > > > > > @@ -5490,6 +5502,7 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port) > > > { > > > struct drm_dp_aux *aux = &port->aux; > > > struct device *parent_dev = port->mgr->dev->dev; > > > + int ret; > > > > > > aux->ddc.algo = &drm_dp_mst_i2c_algo; > > > aux->ddc.algo_data = aux; > > > @@ -5504,7 +5517,17 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port) > > > strlcpy(aux->ddc.name, aux->name ? aux->name : dev_name(parent_dev), > > > sizeof(aux->ddc.name)); > > > > > > - return i2c_add_adapter(&aux->ddc); > > > + ret = i2c_add_adapter(&aux->ddc); > > > + if (ret) > > > + return ret; > > > + > > > + if (port->connector && port->connector->kdev) { > > > + ret = sysfs_create_link(&port->connector->kdev->kobj, > > > + &port->aux.ddc.dev.kobj, "ddc"); > > > + if (ret) > > > + i2c_del_adapter(&port->aux.ddc); > > > + } > > > + return ret; > > > } > > > > > > /** > > > @@ -5513,6 +5536,8 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port) > > > */ > > > static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port) > > > { > > > + if (port->connector && port->connector->kdev) > > > + sysfs_remove_link(&port->connector->kdev->kobj, "ddc"); > > > i2c_del_adapter(&port->aux.ddc); > > > } > > > > > > -- > > > 2.28.0.rc0.142.g3c755180ce-goog > > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel