Hi Laurent,
Thank you for the review.
On Sat, Aug 8, 2020 at 10:13 PM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Fri, Aug 07, 2020 at 06:49:53PM +0100, Lad Prabhakar wrote:
> > Add LVDS encoder node to r8a7742 SoC DT.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/r8a7742.dtsi | 54 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 54 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
> > index a979a4b3de61..a7e66220d63a 100644
> > --- a/arch/arm/boot/dts/r8a7742.dtsi
> > +++ b/arch/arm/boot/dts/r8a7742.dtsi
> > @@ -1534,11 +1534,65 @@
> > port@1 {
> > reg = <1>;
> > du_out_lvds0: endpoint {
> > + remote-endpoint = <&lvds0_in>;
> > };
> > };
> > port@2 {
> > reg = <2>;
> > du_out_lvds1: endpoint {
> > + remote-endpoint = <&lvds1_in>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + lvds0: lvds@feb90000 {
> > + compatible = "renesas,r8a7742-lvds";
> > + reg = <0 0xfeb90000 0 0x1c>;
>
> Isn't 0x14 enough for the size ? 0x1c won't hurt though. Same comment
> below.
>
Agreed, 0x1c comes from Gen-3 manuals.
Cheers,
Prabhakar
> With or without this addressed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> > + clocks = <&cpg CPG_MOD 726>;
> > + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
> > + resets = <&cpg 726>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + lvds0_in: endpoint {
> > + remote-endpoint = <&du_out_lvds0>;
> > + };
> > + };
> > + port@1 {
> > + reg = <1>;
> > + lvds0_out: endpoint {
> > + };
> > + };
> > + };
> > + };
> > +
> > + lvds1: lvds@feb94000 {
> > + compatible = "renesas,r8a7742-lvds";
> > + reg = <0 0xfeb94000 0 0x1c>;
> > + clocks = <&cpg CPG_MOD 725>;
> > + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
> > + resets = <&cpg 725>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + lvds1_in: endpoint {
> > + remote-endpoint = <&du_out_lvds1>;
> > + };
> > + };
> > + port@1 {
> > + reg = <1>;
> > + lvds1_out: endpoint {
> > };
> > };
> > };
>
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
