Hi Jim, here's some comments after testing your series against RPi4.
On Fri, 2020-07-24 at 16:33 -0400, Jim Quinlan wrote:
> The new field 'dma_range_map' in struct device is used to facilitate the
> use of single or multiple offsets between mapping regions of cpu addrs and
> dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only
> capable of holding a single uniform offset and had no region bounds
> checking.
>
> The function of_dma_get_range() has been modified so that it takes a single
> argument -- the device node -- and returns a map, NULL, or an error code.
> The map is an array that holds the information regarding the DMA regions.
> Each range entry contains the address offset, the cpu_start address, the
> dma_start address, and the size of the region.
>
> of_dma_configure() is the typical manner to set range offsets but there are
> a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel
> driver code. These cases now invoke the function
> dma_attach_offset_range(dev, cpu_addr, dma_addr, size).
>
> Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> ---
[...]
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 8eea3f6e29a4..4b718d199efe 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -918,33 +918,33 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
> }
> EXPORT_SYMBOL(of_io_request_and_map);
>
> +#ifdef CONFIG_HAS_DMA
> /**
> - * of_dma_get_range - Get DMA range info
> + * of_dma_get_range - Get DMA range info and put it into a map array
> * @np: device node to get DMA range info
> - * @dma_addr: pointer to store initial DMA address of DMA range
> - * @paddr: pointer to store initial CPU address of DMA range
> - * @size: pointer to store size of DMA range
> + * @map: dma range structure to return
> *
> * Look in bottom up direction for the first "dma-ranges" property
> - * and parse it.
> - * dma-ranges format:
> + * and parse it. Put the information into a DMA offset map array.
> + *
> + * dma-ranges format:
> * DMA addr (dma_addr) : naddr cells
> * CPU addr (phys_addr_t) : pna cells
> * size : nsize cells
> *
> - * It returns -ENODEV if "dma-ranges" property was not found
> - * for this device in DT.
> + * It returns -ENODEV if "dma-ranges" property was not found for this
> + * device in the DT.
> */
> -int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size)
> +int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map)
> {
> struct device_node *node = of_node_get(np);
> const __be32 *ranges = NULL;
> - int len;
> - int ret = 0;
> bool found_dma_ranges = false;
> struct of_range_parser parser;
> struct of_range range;
> - u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> + struct bus_dma_region *r;
> + int len, num_ranges = 0;
> + int ret;
>
> while (node) {
> ranges = of_get_property(node, "dma-ranges", &len);
> @@ -970,44 +970,35 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
> }
>
> of_dma_range_parser_init(&parser, node);
> + for_each_of_range(&parser, &range)
> + num_ranges++;
> +
> + of_dma_range_parser_init(&parser, node);
> +
> + ret = -ENOMEM;
> + r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL);
> + if (!r)
> + goto out;
>
> + /*
> + * Record all info in the generic DMA ranges array for struct device.
> + */
> + *map = r;
> for_each_of_range(&parser, &range) {
> pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> range.bus_addr, range.cpu_addr, range.size);
> -
> - if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) {
> - pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node);
> - /* Don't error out as we'd break some existing DTs */
> - continue;
> - }
> - dma_offset = range.cpu_addr - range.bus_addr;
> -
> - /* Take lower and upper limits */
> - if (range.bus_addr < dma_start)
> - dma_start = range.bus_addr;
> - if (range.bus_addr + range.size > dma_end)
> - dma_end = range.bus_addr + range.size;
> - }
> -
> - if (dma_start >= dma_end) {
> - ret = -EINVAL;
> - pr_debug("Invalid DMA ranges configuration on node(%pOF)\n",
> - node);
> - goto out;
> + r->cpu_start = range.cpu_addr;
> + r->dma_start = range.bus_addr;
> + r->size = range.size;
> + r->offset = (u64)range.cpu_addr - (u64)range.bus_addr;
> + r++;
> }
>
> - *dma_addr = dma_start;
> - *size = dma_end - dma_start;
> - *paddr = dma_start + dma_offset;
> -
> - pr_debug("final: dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> - *dma_addr, *paddr, *size);
> -
I think you're missing here:
ret = 0;
> out:
> of_node_put(node);
> -
> return ret;
> }
Regards,
Nicolas
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
