- Use drm_panel backlight support - Use macro for backlight initialization Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx> Cc: Thierry Reding <thierry.reding@xxxxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 25 +++++++------------ 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c index a5f76eb4fa25..e30ef655a3c3 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c @@ -89,7 +89,6 @@ static u8 const s6e63m0_gamma_22[NUM_GAMMA_LEVELS][GAMMA_TABLE_COUNT] = { struct s6e63m0 { struct device *dev; struct drm_panel panel; - struct backlight_device *bl_dev; struct regulator_bulk_data supplies[2]; struct gpio_desc *reset_gpio; @@ -293,8 +292,6 @@ static int s6e63m0_disable(struct drm_panel *panel) if (!ctx->enabled) return 0; - backlight_disable(ctx->bl_dev); - s6e63m0_dcs_write_seq_static(ctx, MIPI_DCS_ENTER_SLEEP_MODE); msleep(200); @@ -355,8 +352,6 @@ static int s6e63m0_enable(struct drm_panel *panel) s6e63m0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_ON); - backlight_enable(ctx->bl_dev); - ctx->enabled = true; return 0; @@ -395,7 +390,7 @@ static int s6e63m0_set_brightness(struct backlight_device *bd) { struct s6e63m0 *ctx = bl_get_data(bd); - int brightness = bd->props.brightness; + int brightness = backlight_get_brightness(bd); /* disable and set new gamma */ s6e63m0_dcs_write(ctx, s6e63m0_gamma_22[brightness], @@ -413,23 +408,21 @@ static const struct backlight_ops s6e63m0_backlight_ops = { static int s6e63m0_backlight_register(struct s6e63m0 *ctx) { - struct backlight_properties props = { - .type = BACKLIGHT_RAW, - .brightness = MAX_BRIGHTNESS, - .max_brightness = MAX_BRIGHTNESS - }; + DECLARE_BACKLIGHT_INIT_RAW(props, MAX_BRIGHTNESS, MAX_BRIGHTNESS); struct device *dev = ctx->dev; + struct backlight_device *bd; int ret = 0; - ctx->bl_dev = devm_backlight_device_register(dev, "panel", dev, ctx, - &s6e63m0_backlight_ops, - &props); - if (IS_ERR(ctx->bl_dev)) { - ret = PTR_ERR(ctx->bl_dev); + bd = devm_backlight_device_register(dev, "panel", dev, ctx, + &s6e63m0_backlight_ops, &props); + if (IS_ERR(bd)) { + ret = PTR_ERR(bd); DRM_DEV_ERROR(dev, "error registering backlight device (%d)\n", ret); + return ret; } + ctx->panel.backlight = bd; return ret; } -- 2.25.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel