The mxsfb_reset_block() function isn't special, pass it the
mxsfb_drm_private pointer instead of a pointer to the base address.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Stefan Agner <stefan@xxxxxxxx>
Reviewed-by: Emil Velikov <emil.l.velikov@xxxxxxxxx>
---
drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index 8b6339316929..be60c4021e2f 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -166,21 +166,21 @@ static int clear_poll_bit(void __iomem *addr, u32 mask)
return readl_poll_timeout(addr, reg, !(reg & mask), 0, RESET_TIMEOUT);
}
-static int mxsfb_reset_block(void __iomem *reset_addr)
+static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb)
{
int ret;
- ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST);
if (ret)
return ret;
- writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
+ writel(MODULE_CLKGATE, mxsfb->base + MXS_CLR_ADDR);
- ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST);
if (ret)
return ret;
- return clear_poll_bit(reset_addr, MODULE_CLKGATE);
+ return clear_poll_bit(mxsfb->base, MODULE_CLKGATE);
}
static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
@@ -213,7 +213,7 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
*/
/* Mandatory eLCDIF reset as per the Reference Manual */
- err = mxsfb_reset_block(mxsfb->base);
+ err = mxsfb_reset_block(mxsfb);
if (err)
return;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
