Hi Lukas and Daniel, On Fri, Jul 17, 2020 at 11:27:58AM +0200, Daniel Vetter wrote: > On Fri, Jul 17, 2020 at 11:12:39AM +0200, Lucas Stach wrote: > > Am Freitag, den 17.07.2020, 10:59 +0200 schrieb Daniel Vetter: > > > On Fri, Jul 17, 2020 at 10:18 AM Lucas Stach <l.stach@xxxxxxxxxxxxxx> wrote: > > > > Hi Laurentiu, > > > > > > > > Am Donnerstag, den 09.07.2020, 19:47 +0300 schrieb Laurentiu Palcu: > > > > > From: Laurentiu Palcu <laurentiu.palcu@xxxxxxx> > > > > > > > > > > Hi, > > > > > > > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support > > > > > includes only graphics plane support (no video planes), no HDR10 capabilities, > > > > > no graphics decompression (only linear, tiled and super-tiled buffers allowed). > > > > > > > > > > Support for the rest of the features will be added incrementally, in subsequent > > > > > patches. > > > > > > > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream > > > > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS). > > > > > > > > I think the series (minus 3/5 and minor correction to the DT binding) > > > > is fine to go in now. So just some formal questions: are you going to > > > > maintain this driver in upstream? If so we should add a MAINTAINERS > > > > entry to that effect. I can offer to act as a reviewer in this case. I can maintain the DCSS driver, sure, and the more reviewers the better. Thanks for helping out with this. Should I send a v6 then with a patch for MAINTAINERS? > > > > > > > > How do you intend to merge this? IMO pushing this through drm-misc > > > > seems like the right thing to do. If you agree I can help you get this > > > > applied. If you are going to maintain the driver on your own, I think > > > > you should then apply for commit rights to drm-misc. > > > > > > drm/imx isn't listed yet as under the drm-misc umbrella, maybe we > > > should put the entire collective of imx drivers under drm-misc? Or > > > maybe it's just an oversight that the git repo isn't specified in the > > > MAINTAINERS entry. Also maybe we should add the pengutronix kernel > > > team alias there too? > > > > drm/imx was exclusively the IPUv3 up until now, which is in fact > > maintained outside of drm-misc in its own git tree. This has worked > > quite well in the past so even though IPUv3 doesn't see a lot of churn > > these days the motivation to change anything to this workflow is quite > > low. And yes, the git tree is missing from the MAINTAINERS entry. > > > > For the DCSS driver, if it's going to be maintained by NXP, I figured > > it might be easier for Laurentiu to push things into drm-misc than set > > up a separate public git tree. But IMHO that's fully up to him to > > decide. > > /me puts on maintainer hat > > Much prefer drm-misc over random people playing maintainer and fumbling > it. I think the reasonable options are either in the current imx tree, or > drm-misc. Standalone tree for these small drivers just doesn't make much > sense. I don't have anything against either method, though I have to agree I like things to be simple. Going through drm-misc sounds simple enough to me. :) However, since there is going to be more activity in the DRM IMX area in the future, reviving the drm/imx tree, and push all IMX related stuff through drm/imx, could make sense as well. Thanks, Laurentiu > -Daniel > > > > > Regards, > > Lucas > > > > > -Daniel > > > > > > > > > > Regards, > > > > Lucas > > > > > > > > > Thanks, > > > > > Laurentiu > > > > > > > > > > Changes in v5: > > > > > * Rebased to latest; > > > > > * Took out component framework support and made it a separate patch so > > > > > that people can still test with HDP driver, which makes use of it. > > > > > But the idea is to get rid of it once HDP driver's next versions > > > > > will remove component framework as well; > > > > > * Slight improvement to modesetting: avoid cutting off the pixel clock > > > > > if the new mode and the old one are equal. Also, in this case, is > > > > > not necessary to wait for DTG to shut off. This would allow to switch > > > > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least > > > > > from DCSS point of view); > > > > > * Do not fire off CTXLD when going to suspend, unless it still has > > > > > entries that need to be committed to DCSS; > > > > > * Addressed Rob's comments on bindings; > > > > > > > > > > Changes in v4: > > > > > * Addressed Lucas and Philipp's comments: > > > > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig; > > > > > * Removed usage of devm_ functions since I'm already doing all the > > > > > clean-up in the submodules_deinit(); > > > > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush(); > > > > > * Removed en_completion variable from dcss_crtc since this was > > > > > introduced mainly to avoid vblank timeout warnings which were fixed > > > > > by arming the vblank event in flush() instead of begin(); > > > > > * Removed clks_on and irq_enabled flags since all the calls to > > > > > enabling/disabling clocks and interrupts were balanced; > > > > > * Removed the custom atomic_commit callback and used the DRM core > > > > > helper and, in the process, got rid of a workqueue that wasn't > > > > > necessary anymore; > > > > > * Fixed some minor DT binding issues flagged by Philipp; > > > > > * Some other minor changes suggested by Lucas; > > > > > * Removed YUV formats from the supported formats as these cannot work > > > > > without the HDR10 module CSCs and LUTs. Will add them back when I > > > > > will add support for video planes; > > > > > > > > > > Changes in v3: > > > > > * rebased to latest linux-next and made it compile as drmP.h was > > > > > removed; > > > > > * removed the patch adding the VIDEO2_PLL clock. It's already applied; > > > > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set(); > > > > > * fixed a a spurious hang reported by Lukas Hartmann and encountered > > > > > by me several times; > > > > > * mask DPR and DTG interrupts by default, as they may come enabled from > > > > > U-boot; > > > > > > > > > > Changes in v2: > > > > > * Removed '0x' in node's unit-address both in DT and yaml; > > > > > * Made the address region size lowercase, to be consistent; > > > > > * Removed some left-over references to P010; > > > > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation > > > > > issues reported by kbuild for other architectures; > > > > > > > > > > Laurentiu Palcu (5): > > > > > drm/imx: compile imx directory by default > > > > > drm/imx: Add initial support for DCSS on iMX8MQ > > > > > drm/imx/dcss: add component framework functionality > > > > > dt-bindings: display: imx: add bindings for DCSS > > > > > arm64: dts: imx8mq: add DCSS node > > > > > > > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 84 ++ > > > > > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 23 + > > > > > drivers/gpu/drm/Makefile | 2 +- > > > > > drivers/gpu/drm/imx/Kconfig | 2 + > > > > > drivers/gpu/drm/imx/Makefile | 1 + > > > > > drivers/gpu/drm/imx/dcss/Kconfig | 9 + > > > > > drivers/gpu/drm/imx/dcss/Makefile | 6 + > > > > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++ > > > > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 314 +++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 183 ++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 185 ++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 43 + > > > > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++ > > > > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++ > > > > > 20 files changed, 4123 insertions(+), 1 deletion(-) > > > > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c > > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c > > > > > > > > > > > > > _______________________________________________ > > > > dri-devel mailing list > > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > > > > > > > > > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
