Initial issue was that display remains shifted after undeflow, this fix is
to recover the dma after underflow so display is clean. Major changes are
reduce LCD_CLK to 200Mhz and some changes in the lcd timing params
run recovery sequence at the EOF after underflow happens
do nothing in plan_update() during recovery
reenable dma at the vsync interrupt after recovery is done
v2: renamed global vars, upclassed dev_private.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@xxxxxxxxx>
Reviewed-by: Bob Paauwe <bob.j.paauwe@xxxxxxxxx>
---
drivers/gpu/drm/kmb/kmb_crtc.c | 27 +++----
drivers/gpu/drm/kmb/kmb_drv.c | 154 +++++++++++++++++++++++++++++++---------
drivers/gpu/drm/kmb/kmb_drv.h | 33 +++++----
drivers/gpu/drm/kmb/kmb_plane.c | 12 +++-
drivers/gpu/drm/kmb/kmb_plane.h | 29 ++++----
drivers/gpu/drm/kmb/kmb_regs.h | 5 ++
6 files changed, 185 insertions(+), 75 deletions(-)
diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c
index aceca94..8308a9e1 100644
--- a/drivers/gpu/drm/kmb/kmb_crtc.c
+++ b/drivers/gpu/drm/kmb/kmb_crtc.c
@@ -96,25 +96,25 @@ static void kmb_crtc_mode_set_nofb(struct drm_crtc *crtc)
vm.vfront_porch = 2;
// vm.vback_porch = m->crtc_vtotal - m->crtc_vsync_end;
vm.vback_porch = 2;
-// vm.vsync_len = m->crtc_vsync_end - m->crtc_vsync_start;
- vm.vsync_len = 1;
+// vm.vsync_len = m->crtc_vsync_end - m->crtc_vsync_start;
+ vm.vsync_len = 8;
//vm.hfront_porch = m->crtc_hsync_start - m->crtc_hdisplay;
vm.hfront_porch = 0;
vm.hback_porch = 0;
//vm.hback_porch = m->crtc_htotal - m->crtc_hsync_end;
- vm.hsync_len = 7;
-// vm.hsync_len = m->crtc_hsync_end - m->crtc_hsync_start;
+ vm.hsync_len = 28;
+// vm.hsync_len = m->crtc_hsync_end - m->crtc_hsync_start;
- vsync_start_offset = m->crtc_vsync_start - m->crtc_hsync_start;
- vsync_end_offset = m->crtc_vsync_end - m->crtc_hsync_end;
+ vsync_start_offset = m->crtc_vsync_start - m->crtc_hsync_start;
+ vsync_end_offset = m->crtc_vsync_end - m->crtc_hsync_end;
- DRM_DEBUG
- ("%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d h-active=%d h-bp=%d h-fp=%d hysnc-l=%d",
- __func__, __LINE__, m->crtc_vdisplay, vm.vback_porch,
- vm.vfront_porch, vm.vsync_len, m->crtc_hdisplay, vm.hback_porch,
- vm.hfront_porch, vm.hsync_len);
+ DRM_DEBUG("%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d h-active=%d h-bp=%d h-fp=%d hysnc-l=%d",
+ __func__, __LINE__,
+ m->crtc_vdisplay, vm.vback_porch, vm.vfront_porch,
+ vm.vsync_len, m->crtc_hdisplay, vm.hback_porch,
+ vm.hfront_porch, vm.hsync_len);
kmb_write_lcd(dev_p, LCD_V_ACTIVEHEIGHT,
- m->crtc_vdisplay - 1);
+ m->crtc_vdisplay - 1);
kmb_write_lcd(dev_p, LCD_V_BACKPORCH, vm.vback_porch);
kmb_write_lcd(dev_p, LCD_V_FRONTPORCH, vm.vfront_porch);
kmb_write_lcd(dev_p, LCD_VSYNC_WIDTH, vm.vsync_len - 1);
@@ -126,7 +126,8 @@ static void kmb_crtc_mode_set_nofb(struct drm_crtc *crtc)
/*this is hardcoded as 0 in the Myriadx code */
kmb_write_lcd(dev_p, LCD_VSYNC_START, 0);
kmb_write_lcd(dev_p, LCD_VSYNC_END, 0);
-
+ /* back ground color */
+ kmb_write_lcd(dev_p, LCD_BG_COLOUR_LS, 0x4);
if (m->flags == DRM_MODE_FLAG_INTERLACE) {
kmb_write_lcd(dev_p,
LCD_VSYNC_WIDTH_EVEN, vm.vsync_len - 1);
diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c
index b844c77..559742b8 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.c
+++ b/drivers/gpu/drm/kmb/kmb_drv.c
@@ -31,10 +31,10 @@
#include "kmb_regs.h"
//#define DEBUG
-
/* IRQ handler */
static irqreturn_t kmb_isr(int irq, void *arg);
+int kmb_under_flow = 0, kmb_flush_done = 0, layer_no = 0;
static struct clk *clk_lcd;
static struct clk *clk_mipi;
static struct clk *clk_mipi_ecfg;
@@ -111,6 +111,7 @@ static void __iomem *kmb_map_mmio(struct platform_device *pdev, char *name)
return mem;
}
+//#define ICAM_LCD_QOS
static int kmb_load(struct drm_device *drm, unsigned long flags)
{
struct kmb_drm_private *dev_p = to_kmb(drm);
@@ -118,6 +119,9 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
int irq_lcd;
int ret = 0;
unsigned long clk;
+#ifdef ICAM_LCD_QOS
+ int val = 0;
+#endif
/* Map MIPI MMIO registers */
dev_p->mipi_mmio = kmb_map_mmio(pdev, "mipi_regs");
@@ -151,6 +155,13 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
iounmap(dev_p->mipi_mmio);
return -ENOMEM;
}
+#ifdef ICAM_LCD_QOS
+ dev_p->icamlcd_mmio = ioremap_nocache(ICAM_MMIO, ICAM_MMIO_SIZE);
+ if (IS_ERR(dev_p->icamlcd_mmio)) {
+ DRM_ERROR("failed to map ICAM registers\n");
+ return -ENOMEM;
+ }
+#endif
#define KMB_CLOCKS
#ifdef KMB_CLOCKS
/* Enable display clocks */
@@ -246,7 +257,7 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
kmb_set_bitmask_msscam(dev_p, MSS_CAM_CLK_CTRL, 0x1fff);
kmb_set_bitmask_msscam(dev_p, MSS_CAM_RSTN_CTRL, 0xffffffff);
-#endif //KMB_CLOCKS
+#endif //KMB_CLOCKS
/* Register irqs here - section 17.3 in databook
* lists LCD at 79 and 82 for MIPI under MSS CPU -
@@ -309,11 +320,29 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
dev_p->irq_lcd = irq_lcd;
+ /* icam tests */
+#ifdef ICAM_LCD_QOS
+ /*generator mode = 0 fixed mode=1 limiter */
+ writel(1, (dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_MODE));
+ /* b/w */
+ writel(0x60, (dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_BW));
+
+ /* set priority.p1 */
+ val = readl(dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_PRORITY);
+ val &= ~(0x700);
+ writel(val | 0x100,
+ (dev_p->icamlcd_mmio + ICAM_LCD_OFFSET + LCD_QOS_PRORITY));
+
+ DRM_INFO("ICAM mode = 0x%x, priority = 0x%x bandwidth=0x%x",
+ readl(dev_p->icamlcd_mmio + 0x1080 + LCD_QOS_MODE),
+ readl(dev_p->icamlcd_mmio + 0x1080 + LCD_QOS_PRORITY),
+ readl(dev_p->icamlcd_mmio + 0x1080 + LCD_QOS_BW));
+#endif
return 0;
-irq_fail:
+ irq_fail:
drm_crtc_cleanup(&dev_p->crtc);
-setup_fail:
+ setup_fail:
of_reserved_mem_device_release(drm->dev);
return ret;
@@ -346,13 +375,15 @@ static void kmb_setup_mode_config(struct drm_device *drm)
static irqreturn_t handle_lcd_irq(struct drm_device *dev)
{
- unsigned long status, val;
- int plane_id;
+ volatile unsigned long status, val, val1;
+ int plane_id, dma0_state, dma1_state;
struct kmb_drm_private *dev_p = to_kmb(dev);
status = kmb_read_lcd(dev_p, LCD_INT_STATUS);
+
if (status & LCD_INT_EOF) {
/* TODO - handle EOF interrupt? */
+
kmb_write_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_EOF);
/* When disabling/enabling LCD layers, the change takes effect
@@ -374,6 +405,28 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev)
plane_status[plane_id].disable = false;
}
}
+ if (kmb_under_flow) {
+ /*DMA Recovery after underflow */
+ dma0_state = (layer_no == 0) ?
+ LCD_VIDEO0_DMA0_STATE : LCD_VIDEO1_DMA0_STATE;
+ dma1_state = (layer_no == 0) ?
+ LCD_VIDEO0_DMA1_STATE : LCD_VIDEO1_DMA1_STATE;
+
+ do {
+ kmb_write_lcd(dev_p, LCD_FIFO_FLUSH, 1);
+ val = kmb_read_lcd(dev_p, dma0_state)
+ & LCD_DMA_STATE_ACTIVE;
+ val1 = kmb_read_lcd(dev_p, dma1_state)
+ & LCD_DMA_STATE_ACTIVE;
+ } while ((val || val1));
+ /*disable dma */
+ kmb_clr_bitmask_lcd(dev_p, LCD_LAYERn_DMA_CFG(layer_no),
+ LCD_DMA_LAYER_ENABLE);
+ kmb_write_lcd(dev_p, LCD_FIFO_FLUSH, 1);
+ kmb_flush_done = 1;
+ kmb_under_flow = 0;
+ }
+
}
if (status & LCD_INT_LINE_CMP) {
@@ -387,48 +440,86 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev)
val = (val & LCD_VSTATUS_VERTICAL_STATUS_MASK);
switch (val) {
case LCD_VSTATUS_COMPARE_VSYNC:
+ /* Clear vertical compare interrupt */
+ kmb_write_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_VERT_COMP);
+ if (kmb_flush_done) {
+ kmb_set_bitmask_lcd(dev_p,
+ LCD_LAYERn_DMA_CFG
+ (layer_no),
+ LCD_DMA_LAYER_ENABLE);
+ kmb_flush_done = 0;
+ }
+ drm_handle_vblank(dev, 0);
+ break;
case LCD_VSTATUS_COMPARE_BACKPORCH:
case LCD_VSTATUS_COMPARE_ACTIVE:
case LCD_VSTATUS_COMPARE_FRONT_PORCH:
- /* clear vertical compare interrupt */
- kmb_write_lcd(dev_p, LCD_INT_CLEAR,
- LCD_INT_VERT_COMP);
- drm_handle_vblank(dev, 0);
+ kmb_write_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_VERT_COMP);
break;
}
}
-
if (status & LCD_INT_DMA_ERR) {
- val = (status & LCD_INT_DMA_ERR);
+ val =
+ (status & LCD_INT_DMA_ERR &
+ kmb_read_lcd(dev_p, LCD_INT_ENABLE));
/* LAYER0 - VL0 */
- if (val & LAYER0_DMA_FIFO_UNDERFLOW)
- DRM_INFO("LAYER0:VL0 DMA UNDERFLOW val = 0x%lx", val);
+ if (val & (LAYER0_DMA_FIFO_UNDERFLOW |
+ LAYER0_DMA_CB_FIFO_UNDERFLOW |
+ LAYER0_DMA_CR_FIFO_UNDERFLOW)) {
+ kmb_under_flow++;
+ DRM_INFO
+ ("!LAYER0:VL0 DMA UNDERFLOW val = 0x%lx,under_flow=%d",
+ val, kmb_under_flow);
+ /*disable underflow inerrupt */
+ kmb_clr_bitmask_lcd(dev_p, LCD_INT_ENABLE,
+ LAYER0_DMA_FIFO_UNDERFLOW |
+ LAYER0_DMA_CB_FIFO_UNDERFLOW |
+ LAYER0_DMA_CR_FIFO_UNDERFLOW);
+ kmb_set_bitmask_lcd(dev_p, LCD_INT_CLEAR,
+ LAYER0_DMA_CB_FIFO_UNDERFLOW |
+ LAYER0_DMA_FIFO_UNDERFLOW |
+ LAYER0_DMA_CR_FIFO_UNDERFLOW);
+ /*disable auto restart mode */
+ kmb_clr_bitmask_lcd(dev_p, LCD_LAYERn_DMA_CFG(0),
+ LCD_DMA_LAYER_CONT_PING_PONG_UPDATE);
+ layer_no = 0;
+ }
+
if (val & LAYER0_DMA_FIFO_OVERFLOW)
DRM_INFO("LAYER0:VL0 DMA OVERFLOW val = 0x%lx", val);
if (val & LAYER0_DMA_CB_FIFO_OVERFLOW)
DRM_INFO("LAYER0:VL0 DMA CB OVERFLOW val = 0x%lx", val);
- if (val & LAYER0_DMA_CB_FIFO_UNDERFLOW)
- DRM_INFO("LAYER0:VL0 DMA CB UNDERFLOW val = 0x%lx",
- val);
- if (val & LAYER0_DMA_CR_FIFO_UNDERFLOW)
- DRM_INFO("LAYER0:VL0 DMA CR UNDERFLOW val = 0x%lx",
- val);
if (val & LAYER0_DMA_CR_FIFO_OVERFLOW)
DRM_INFO("LAYER0:VL0 DMA CR OVERFLOW val = 0x%lx", val);
/* LAYER1 - VL1 */
- if (val & LAYER1_DMA_FIFO_UNDERFLOW)
- DRM_INFO("LAYER1:VL1 DMA UNDERFLOW val = 0x%lx", val);
+ if (val & (LAYER1_DMA_FIFO_UNDERFLOW |
+ LAYER1_DMA_CB_FIFO_UNDERFLOW |
+ LAYER1_DMA_CR_FIFO_UNDERFLOW)) {
+ kmb_under_flow++;
+ DRM_INFO
+ ("!LAYER1:VL1 DMA UNDERFLOW val = 0x%lx, under_flow=%d",
+ val, kmb_under_flow);
+ /*disable underflow inerrupt */
+ kmb_clr_bitmask_lcd(dev_p, LCD_INT_ENABLE,
+ LAYER1_DMA_FIFO_UNDERFLOW |
+ LAYER1_DMA_CB_FIFO_UNDERFLOW |
+ LAYER1_DMA_CR_FIFO_UNDERFLOW);
+ kmb_set_bitmask_lcd(dev_p, LCD_INT_CLEAR,
+ LAYER1_DMA_CB_FIFO_UNDERFLOW |
+ LAYER1_DMA_FIFO_UNDERFLOW |
+ LAYER1_DMA_CR_FIFO_UNDERFLOW);
+ /*disable auto restart mode */
+ kmb_clr_bitmask_lcd(dev_p, LCD_LAYERn_DMA_CFG(1),
+ LCD_DMA_LAYER_CONT_PING_PONG_UPDATE);
+ layer_no = 1;
+ }
+
+ /* LAYER1 - VL1 */
if (val & LAYER1_DMA_FIFO_OVERFLOW)
DRM_INFO("LAYER1:VL1 DMA OVERFLOW val = 0x%lx", val);
if (val & LAYER1_DMA_CB_FIFO_OVERFLOW)
DRM_INFO("LAYER1:VL1 DMA CB OVERFLOW val = 0x%lx", val);
- if (val & LAYER1_DMA_CB_FIFO_UNDERFLOW)
- DRM_INFO("LAYER1:VL1 DMA CB UNDERFLOW val = 0x%lx",
- val);
- if (val & LAYER1_DMA_CR_FIFO_UNDERFLOW)
- DRM_INFO("LAYER1:VL1 DMA CR UNDERFLOW val = 0x%lx",
- val);
if (val & LAYER1_DMA_CR_FIFO_OVERFLOW)
DRM_INFO("LAYER1:VL1 DMA CR OVERFLOW val = 0x%lx", val);
@@ -443,7 +534,6 @@ static irqreturn_t handle_lcd_irq(struct drm_device *dev)
DRM_INFO("LAYER3:GL1 DMA UNDERFLOW val = 0x%lx", val);
if (val & LAYER3_DMA_FIFO_UNDERFLOW)
DRM_INFO("LAYER3:GL1 DMA OVERFLOW val = 0x%lx", val);
-
}
if (status & LCD_INT_LAYER) {
@@ -630,11 +720,11 @@ static int kmb_probe(struct platform_device *pdev)
#endif
return 0;
-err_register:
+ err_register:
drm_kms_helper_poll_fini(drm);
-err_vblank:
+ err_vblank:
pm_runtime_disable(drm->dev);
-err_free:
+ err_free:
drm_mode_config_cleanup(drm);
dev_set_drvdata(dev, NULL);
drm_dev_put(drm);
diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h
index 373a059..939f8b4 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.h
+++ b/drivers/gpu/drm/kmb/kmb_drv.h
@@ -14,28 +14,31 @@
#define KMB_MAX_HEIGHT 1080 /*max height in pixels */
#define KMB_MIN_WIDTH 1920 /*max width in pixels */
#define KMB_MIN_HEIGHT 1080 /*max height in pixels */
-#define KMB_LCD_DEFAULT_CLK 250000000
+#define KMB_LCD_DEFAULT_CLK 200000000
#define KMB_MIPI_DEFAULT_CLK 24000000
#define KMB_MIPI_DEFAULT_CFG_CLK 24000000
#define KMB_SYS_CLK_MHZ 500
#define crtc_to_kmb_priv(x) container_of(x, struct kmb_drm_private, crtc)
-
+#define ICAM_MMIO 0x3b100000
+#define ICAM_LCD_OFFSET 0x1080
+#define ICAM_MMIO_SIZE 0x2000
struct kmb_drm_private {
- struct drm_device drm;
- void __iomem *lcd_mmio;
- void __iomem *mipi_mmio;
- void __iomem *msscam_mmio;
- unsigned char n_layers;
- struct clk *clk;
- struct drm_crtc crtc;
- struct kmb_plane *plane;
- struct drm_atomic_state *state;
- spinlock_t irq_lock;
- int irq_lcd;
- int irq_mipi;
- dma_addr_t fb_addr;
+ struct drm_device drm;
+ void __iomem *lcd_mmio;
+ void __iomem *mipi_mmio;
+ void __iomem *msscam_mmio;
+ void __iomem *icamlcd_mmio;
+ unsigned char n_layers;
+ struct clk *clk;
+ struct drm_crtc crtc;
+ struct kmb_plane *plane;
+ struct drm_atomic_state *state;
+ spinlock_t irq_lock;
+ int irq_lcd;
+ int irq_mipi;
+ dma_addr_t fb_addr;
};
static inline struct kmb_drm_private *to_kmb(const struct drm_device *dev)
diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c
index a6b5969..de225a8 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.c
+++ b/drivers/gpu/drm/kmb/kmb_plane.c
@@ -22,7 +22,6 @@
#include "kmb_regs.h"
struct layer_status plane_status[KMB_MAX_PLANES];
-
const uint32_t layer_irqs[] = {
LCD_INT_VL0,
LCD_INT_VL1,
@@ -247,13 +246,17 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
fb = plane->state->fb;
if (!fb)
return;
-
num_planes = fb->format->num_planes;
kmb_plane = to_kmb_plane(plane);
plane_id = kmb_plane->id;
dev_p = to_kmb(plane->dev);
+ if (kmb_under_flow || kmb_flush_done) {
+ DRM_DEBUG("plane_update:underflow!!!! returning");
+ return;
+ }
+
src_w = (plane->state->src_w >> 16);
src_h = plane->state->src_h >> 16;
crtc_x = plane->state->crtc_x;
@@ -373,6 +376,11 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
kmb_write_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg);
DRM_DEBUG("dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg,
kmb_read_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id)));
+
+ kmb_set_bitmask_lcd(dev_p, LCD_INT_CLEAR, LCD_INT_EOF |
+ LCD_INT_DMA_ERR);
+ kmb_set_bitmask_lcd(dev_p, LCD_INT_ENABLE, LCD_INT_EOF |
+ LCD_INT_DMA_ERR);
#endif
}
diff --git a/drivers/gpu/drm/kmb/kmb_plane.h b/drivers/gpu/drm/kmb/kmb_plane.h
index d8e1ece..48f237f 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.h
+++ b/drivers/gpu/drm/kmb/kmb_plane.h
@@ -8,19 +8,22 @@
#include "kmb_drv.h"
-#define LCD_INT_VL0_ERR (LAYER0_DMA_FIFO_UNDERFLOW | \
- LAYER0_DMA_FIFO_OVERFLOW | \
- LAYER0_DMA_CB_FIFO_OVERFLOW | \
- LAYER0_DMA_CB_FIFO_UNDERFLOW | \
- LAYER0_DMA_CR_FIFO_OVERFLOW | \
- LAYER0_DMA_CR_FIFO_UNDERFLOW)
-
-#define LCD_INT_VL1_ERR (LAYER1_DMA_FIFO_UNDERFLOW | \
- LAYER1_DMA_FIFO_OVERFLOW | \
- LAYER1_DMA_CB_FIFO_OVERFLOW | \
- LAYER1_DMA_CB_FIFO_UNDERFLOW | \
- LAYER1_DMA_CR_FIFO_OVERFLOW | \
- LAYER1_DMA_CR_FIFO_UNDERFLOW)
+extern int kmb_under_flow;
+extern int kmb_flush_done;
+
+#define LCD_INT_VL0_ERR ((LAYER0_DMA_FIFO_UNDERFLOW) | \
+ (LAYER0_DMA_FIFO_OVERFLOW) | \
+ (LAYER0_DMA_CB_FIFO_OVERFLOW) | \
+ (LAYER0_DMA_CB_FIFO_UNDERFLOW) | \
+ (LAYER0_DMA_CR_FIFO_OVERFLOW) | \
+ (LAYER0_DMA_CR_FIFO_UNDERFLOW))
+
+#define LCD_INT_VL1_ERR ((LAYER1_DMA_FIFO_UNDERFLOW) | \
+ (LAYER1_DMA_FIFO_OVERFLOW) | \
+ (LAYER1_DMA_CB_FIFO_OVERFLOW) | \
+ (LAYER1_DMA_CB_FIFO_UNDERFLOW) | \
+ (LAYER1_DMA_CR_FIFO_OVERFLOW) | \
+ (LAYER1_DMA_CR_FIFO_UNDERFLOW))
#define LCD_INT_GL0_ERR (LAYER2_DMA_FIFO_OVERFLOW | LAYER2_DMA_FIFO_UNDERFLOW)
#define LCD_INT_GL1_ERR (LAYER3_DMA_FIFO_OVERFLOW | LAYER3_DMA_FIFO_UNDERFLOW)
diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h
index c5768d5..089e42d 100644
--- a/drivers/gpu/drm/kmb/kmb_regs.h
+++ b/drivers/gpu/drm/kmb/kmb_regs.h
@@ -382,6 +382,7 @@
#define LCD_PWM2_HIGH_LOW (0x4 * 0x81a)
#define LCD_VIDEO0_DMA0_BYTES (0x4 * 0xb00)
#define LCD_VIDEO0_DMA0_STATE (0x4 * 0xb01)
+#define LCD_DMA_STATE_ACTIVE (1 << 3)
#define LCD_VIDEO0_DMA1_BYTES (0x4 * 0xb02)
#define LCD_VIDEO0_DMA1_STATE (0x4 * 0xb03)
#define LCD_VIDEO0_DMA2_BYTES (0x4 * 0xb04)
@@ -730,4 +731,8 @@
#define MSSCPU_CPR_CLK_EN (0x0)
#define MSSCPU_CPR_RST_EN (0x10)
#define BIT_MASK_16 (0xffff)
+/*icam lcd qos */
+#define LCD_QOS_PRORITY (0x8)
+#define LCD_QOS_MODE (0xC)
+#define LCD_QOS_BW (0x10)
#endif /* __KMB_REGS_H__ */
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
