On 7/13/20 11:24 AM, Georgi Djakov wrote:
On 7/1/20 07:25, Jonathan Marek wrote:
The a6xx GMU can vote for ddr and cnoc bandwidth, but it needs to be able
to query the interconnect driver for bcm addresses and commands.
It's not very clear to me how the GMU firmware would be dealing with this? Does
anyone have an idea whether the GMU makes any bandwidth decisions? Or is it just
a static configuration and it just enables/disables a TCS?
The GMU is able to vote for bandwidth, and presumably RPMh is
aggregating those votes with the votes from the interconnect driver. We
need to be able to fill out the "struct a6xx_hfi_msg_bw_table" in
drivers/gpu/drm/msm/adreno/a6xx_hfi.h, which has a table of DDR
bandwidth cmds which can be selected when changing the GPU frequency
(the bw field in a6xx_hfi_gx_bw_perf_vote_cmd).
From Jordan: "the GMU registers a bus vote directly with the hardware.
It should handle aggregation for us."
I think that we can query the address from the cmd-db, but we have to know the
bcm names and the path. All the BCM/TCS information looks to be very low-level
and implementation specific, so exposing it through an API is not very good,
but hard-coding all this information is not good either.
Thanks,
Georgi
I'm not sure what is the best way to go about implementing this, this is
what I came up with.
I included a quick example of how this can be used by the a6xx driver to
fill out the GMU bw_table (two ddr bandwidth levels in this example, note
this would be using the frequency table in dts and not hardcoded values).
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 20 ++++-------
drivers/interconnect/qcom/icc-rpmh.c | 50 +++++++++++++++++++++++++++
include/soc/qcom/icc.h | 11 ++++++
3 files changed, 68 insertions(+), 13 deletions(-)
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
