On Mon, Jul 13, 2020 at 3:18 AM <kalyan_t@xxxxxxxxxxxxxx> wrote:
>
> On 2020-07-10 22:19, Rob Clark wrote:
> > On Thu, Jun 25, 2020 at 5:46 AM Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
> > wrote:
> >>
> >> Setup an RGB HW pipe as cursor which can be used on
> >> secondary interface.
> >>
> >> For SC7180 2 HW pipes are enumerated as cursors
> >> 1 - primary interface
> >> 2 - secondary interface
> >>
> >> Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
> >> ---
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 12 ++++++------
> >> 1 file changed, 6 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> >> index 8f2357d..23061fd 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> >> @@ -117,10 +117,10 @@
> >> .reg_off = 0x2AC, .bit_off = 0},
> >> .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> >> .reg_off = 0x2AC, .bit_off = 8},
> >> - .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> >> - .reg_off = 0x2B4, .bit_off = 8},
> >> .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> >> - .reg_off = 0x2BC, .bit_off = 8},
> >> + .reg_off = 0x2B4, .bit_off = 8},
> >> + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> >> + .reg_off = 0x2C4, .bit_off = 8},
> >
> > It looks like you shifted the register offset here from 0x2bc to
> > 0x2c4, was that intentional?
> >
> > BR,
> > -R
> Yes Rob, the offset was wrong which i corrected in this patch.
Thanks for confirming. In the future, it would have been useful to
mention that in the commit msg.
BR,
-R
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
