Hi Sam,
Thank you for the patch.
On Fri, Jul 03, 2020 at 09:24:14PM +0200, Sam Ravnborg wrote:
> Prepare the bridge driver for use in a chained setup by
> replacing direct use of drm_panel with drm_panel_bridge support.
>
> Note: the bridge panel will use the connector type from the panel.
>
> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Jonas Karlman <jonas@xxxxxxxxx>
> Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> ---
> drivers/gpu/drm/bridge/nxp-ptn3460.c | 51 ++++++++--------------------
> 1 file changed, 14 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> index 438e566ce0a4..0bd9f0e451b3 100644
> --- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
> +++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
> @@ -30,7 +30,7 @@ struct ptn3460_bridge {
> struct i2c_client *client;
> struct drm_bridge bridge;
> struct edid *edid;
> - struct drm_panel *panel;
> + struct drm_bridge *panel_bridge;
> struct gpio_desc *gpio_pd_n;
> struct gpio_desc *gpio_rst_n;
> u32 edid_emulation;
> @@ -127,11 +127,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
> usleep_range(10, 20);
> gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
>
> - if (drm_panel_prepare(ptn_bridge->panel)) {
> - DRM_ERROR("failed to prepare panel\n");
> - return;
> - }
> -
> /*
> * There's a bug in the PTN chip where it falsely asserts hotplug before
> * it is fully functional. We're forced to wait for the maximum start up
> @@ -146,16 +141,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
> ptn_bridge->enabled = true;
> }
>
> -static void ptn3460_enable(struct drm_bridge *bridge)
> -{
> - struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> -
> - if (drm_panel_enable(ptn_bridge->panel)) {
> - DRM_ERROR("failed to enable panel\n");
> - return;
> - }
> -}
> -
> static void ptn3460_disable(struct drm_bridge *bridge)
> {
> struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> @@ -165,25 +150,10 @@ static void ptn3460_disable(struct drm_bridge *bridge)
>
> ptn_bridge->enabled = false;
>
> - if (drm_panel_disable(ptn_bridge->panel)) {
> - DRM_ERROR("failed to disable panel\n");
> - return;
> - }
> -
> gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
> gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
> }
>
> -static void ptn3460_post_disable(struct drm_bridge *bridge)
> -{
> - struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> -
> - if (drm_panel_unprepare(ptn_bridge->panel)) {
> - DRM_ERROR("failed to unprepare panel\n");
> - return;
> - }
> -}
> -
> static int ptn3460_get_modes(struct drm_connector *connector)
> {
> struct ptn3460_bridge *ptn_bridge;
> @@ -242,6 +212,11 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
> struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
> int ret;
>
> + ret = drm_bridge_attach(bridge->encoder, ptn_bridge->panel_bridge,
> + bridge, flags);
Same as earlier in the series about the flags.
> + if (ret < 0)
> + return ret;
> +
> if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
> DRM_ERROR("Fix bridge driver to make connector optional!");
> return -EINVAL;
> @@ -265,9 +240,6 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
> drm_connector_attach_encoder(&ptn_bridge->connector,
> bridge->encoder);
>
> - if (ptn_bridge->panel)
> - drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
> -
> drm_helper_hpd_irq_event(ptn_bridge->connector.dev);
>
> return ret;
> @@ -275,9 +247,7 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
>
> static const struct drm_bridge_funcs ptn3460_bridge_funcs = {
> .pre_enable = ptn3460_pre_enable,
> - .enable = ptn3460_enable,
> .disable = ptn3460_disable,
> - .post_disable = ptn3460_post_disable,
> .attach = ptn3460_bridge_attach,
> };
>
> @@ -286,6 +256,8 @@ static int ptn3460_probe(struct i2c_client *client,
> {
> struct device *dev = &client->dev;
> struct ptn3460_bridge *ptn_bridge;
> + struct drm_bridge *pbridge;
> + struct drm_panel *panel;
> int ret;
>
> ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
> @@ -293,10 +265,15 @@ static int ptn3460_probe(struct i2c_client *client,
> return -ENOMEM;
> }
>
> - ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ptn_bridge->panel, NULL);
> + ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, NULL);
> if (ret)
> return ret;
>
> + pbridge = devm_drm_panel_bridge_add(dev, panel);
> + if (IS_ERR(pbridge))
> + return PTR_ERR(pbridge);
> +
> + ptn_bridge->panel_bridge = pbridge;
> ptn_bridge->client = client;
>
> ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
