On Thu, Jul 9, 2020 at 11:15 PM Steev Klimaszewski <steev@xxxxxxxx> wrote:
>
> Hi,
>
> On 7/9/20 11:12 PM, Doug Anderson wrote:
> >> root@c630:~# bus=$(i2cdetect -l | grep sn65 | sed 's/i2c-\([0-9]*\).*$/\1/')
> >> root@c630:~# i2cdump ${bus} 0x50 i > edid
> >> WARNING! This program can confuse your I2C bus, cause data loss and worse!
> >> I will probe file /dev/i2c-16, address 0x50, mode i2c block
> >> Continue? [Y/n]
> >> root@c630:~# edid-decode edid
> >> edid-decode (hex):
> >>
> >> 00 ff ff ff ff ff ff 00 09 e5 d1 07 00 00 00 00
> >> 01 1c 01 04 a5 1d 11 78 0a 1d b0 a6 58 54 9e 26
> >> 0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
> >> 01 01 01 01 01 01 c0 39 80 18 71 38 28 40 30 20
> >> 36 00 26 a5 10 00 00 1a 00 00 00 00 00 00 00 00
> >> 00 00 00 00 00 00 00 00 00 1a 00 00 00 fe 00 42
> >> 4f 45 20 43 51 0a 20 20 20 20 20 20 00 00 00 fe
> >> 00 4e 56 31 33 33 46 48 4d 2d 4e 36 31 0a 00 9a
> >>
> >> 03 26 0a 77 ab 1c 05 71 6f 1d 8c f1 43 ce 6a bb
> >> fb d3 11 20 39 07 22 6e 65 68 77 70 d3 05 34 73
> >> 44 21 8b fd f5 6d 11 62 94 2a 7c fa 93 ba 6a 61
> >> 92 da 15 53 4c 39 eb f7 86 23 97 48 e9 39 09 d2
> >> 66 02 70 bb e2 77 0f 4a a3 a0 4c 72 6e 5d 47 70
> >> 43 c2 13 f3 b2 d9 b9 78 02 be 41 82 15 6a 28 dc
> >> 45 0f 9d eb 0f 2a cc e8 35 8d 34 7f 3e 84 5e a3
> >> 30 5e 1e 29 0a 48 0c d1 0a c4 08 31 03 a9 3b 29
> >>
> >> ----------------
> >>
> >> EDID version: 1.4
> >> Manufacturer: BOE Model 2001 Serial Number 0
> >> Made in week 1 of 2018
> >> Digital display
> >> 8 bits per primary color channel
> >> DisplayPort interface
> >> Maximum image size: 29 cm x 17 cm
> >> Gamma: 2.20
> >> Supported color formats: RGB 4:4:4, YCrCb 4:4:4
> >> First detailed timing includes the native pixel format and preferred
> >> refresh rate
> >> Color Characteristics
> >> Red: 0.6484, 0.3447
> >> Green: 0.3310, 0.6181
> >> Blue: 0.1503, 0.0615
> >> White: 0.3125, 0.3281
> >> Established Timings I & II: none
> >> Standard Timings: none
> >> Detailed mode: Clock 147.840 MHz, 294 mm x 165 mm
> >> 1920 1968 2000 2200 ( 48 32 200)
> >> 1080 1083 1089 1120 ( 3 6 31)
> >> +hsync -vsync
> >> VertFreq: 60.000 Hz, HorFreq: 67.200 kHz
> >> Manufacturer-Specified Display Descriptor (0x00): 00 00 00 00 00 00 00
> >> 00 00 00 00 00 00 00 00 1a ................
> >> Alphanumeric Data String: BOE CQ
> >> Alphanumeric Data String: NV133FHM-N61
> >> Checksum: 0x9a
> >>
> >> ----------------
> >>
> >> Unknown EDID Extension Block 0x03
> >> 03 26 0a 77 ab 1c 05 71 6f 1d 8c f1 43 ce 6a bb .&.w...qo...C.j.
> >> fb d3 11 20 39 07 22 6e 65 68 77 70 d3 05 34 73 ... 9."nehwp..4s
> >> 44 21 8b fd f5 6d 11 62 94 2a 7c fa 93 ba 6a 61 D!...m.b.*|...ja
> >> 92 da 15 53 4c 39 eb f7 86 23 97 48 e9 39 09 d2 ...SL9...#.H.9..
> >> 66 02 70 bb e2 77 0f 4a a3 a0 4c 72 6e 5d 47 70 f.p..w.J..Lrn]Gp
> >> 43 c2 13 f3 b2 d9 b9 78 02 be 41 82 15 6a 28 dc C......x..A..j(.
> >> 45 0f 9d eb 0f 2a cc e8 35 8d 34 7f 3e 84 5e a3 E....*..5.4.>.^.
> >> 30 5e 1e 29 0a 48 0c d1 0a c4 08 31 03 a9 3b 29 0^.).H.....1..;)
> >> Checksum: 0x29 (should be 0x82)
> >>
> >>
> >> - My edid does in fact say it's 8bit
> > Crazy! Mine:
> >
> > Extracted contents:
> > header: 00 ff ff ff ff ff ff 00
> > serial number: 09 e5 2d 08 00 00 00 00 23 1c
> > version: 01 04
> > basic params: 95 1d 11 78 02
> > chroma info: d5 00 a6 58 54 9f 27 0f 4f 57
> > established: 00 00 00
> > standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
> > descriptor 1: c0 39 80 18 71 38 28 40 30 20 36 00 26 a5 10 00 00 1a
> > descriptor 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > descriptor 3: 00 00 00 fe 00 42 4f 45 20 43 51 0a 20 20 20 20 20 20
> > descriptor 4: 00 00 00 fe 00 4e 56 31 33 33 46 48 4d 2d 4e 36 32 0a
> > extensions: 00
> > checksum: 40
> >
> > Manufacturer: BOE Model 82d Serial Number 0
> > Made week 35 of 2018
> > EDID version: 1.4
> > Digital display
> > 6 bits per primary color channel
> > DisplayPort interface
> > Maximum image size: 29 cm x 17 cm
> > Gamma: 2.20
> > Supported color formats: RGB 4:4:4
> > First detailed timing is preferred timing
> > Established timings supported:
> > Standard timings supported:
> > Detailed mode: Clock 147.840 MHz, 294 mm x 165 mm
> > 1920 1968 2000 2200 hborder 0
> > 1080 1083 1089 1120 vborder 0
> > +hsync -vsync
> > Manufacturer-specified data, tag 0
> > ASCII string: BOE
> > ASCII string: NV133FHM-N62
> > Checksum: 0x40 (valid)
> >
> > Unknown extension block
> >
> > EDID block does NOT conform to EDID 1.3!
> > Missing name descriptor
> > Missing monitor ranges
> > Detailed block string not properly terminated
> > EDID block does not conform at all!
> > Has 128 nonconformant extension block(s)
>
> I did attempt to modify the patch, and I don't think I did it correctly
>
> Around line 232, I changed
>
> IS_SC7180_TARGET(c->hw.hwversion))
>
> to
>
> IS_SC7180_TARGET(c->hw.hwversion) ||
>
> IS_SDM845_TARGET(c->hw.hwversion))
>
>
> But it would seem that only gets us 1/2 way there...
>
> https://dev.gentoo.org/~steev/files/image2.jpg
>
neat.. I guess this is because 845/850 supports split-lm (layer
mixer), and uses it for horiz resolution above 1080
(MAX_HDISPLAY_SPLIT)
I *think* you could probably increase MAX_HDISPLAY_SPLIT to 1920 and
it will "work". (Or at least I think our reasons for using a lower
value are power, on older gens we only used split mode above 2k
width.)
BR,
-R
>
> But should I continue on this path, or should we be finding others who
> have an N61 and see what their EDID reports?
>
> I have another c630, but unfortunately, it appears to have the IVO
> screen in it, instead of another N61. I asked another user and he also
> had the IVO.
>
> -- steev
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
