Le jeu. 2 juil. 2020 à 14:18, Philippe CORNU <philippe.cornu@xxxxxx> a écrit :
>
>
>
> On 7/1/20 2:04 PM, Yannick Fertre wrote:
> > It is not necessary to suspend or stop the ltdc clocks
> > to modify the pixel clock.
> >
> > Signed-off-by: Yannick Fertre <yannick.fertre@xxxxxx>
> > ---
> > drivers/gpu/drm/stm/ltdc.c | 16 ----------------
> > 1 file changed, 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> > index 3f590d916e91..6e28f707092f 100644
> > --- a/drivers/gpu/drm/stm/ltdc.c
> > +++ b/drivers/gpu/drm/stm/ltdc.c
> > @@ -506,15 +506,7 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
> > struct drm_display_mode *adjusted_mode)
> > {
> > struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> > - struct drm_device *ddev = crtc->dev;
> > int rate = mode->clock * 1000;
> > - bool runtime_active;
> > - int ret;
> > -
> > - runtime_active = pm_runtime_active(ddev->dev);
> > -
> > - if (runtime_active)
> > - pm_runtime_put_sync(ddev->dev);
> >
> > if (clk_set_rate(ldev->pixel_clk, rate) < 0) {
> > DRM_ERROR("Cannot set rate (%dHz) for pixel clk\n", rate);
> > @@ -523,14 +515,6 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
> >
> > adjusted_mode->clock = clk_get_rate(ldev->pixel_clk) / 1000;
> >
> > - if (runtime_active) {
> > - ret = pm_runtime_get_sync(ddev->dev);
> > - if (ret) {
> > - DRM_ERROR("Failed to fixup mode, cannot get sync\n");
> > - return false;
> > - }
> > - }
> > -
> > DRM_DEBUG_DRIVER("requested clock %dkHz, adjusted clock %dkHz\n",
> > mode->clock, adjusted_mode->clock);
> >
> >
> Hi Yannick,
> Many thanks for your patch,
> Acked-by: Philippe Cornu <philippe.cornu@xxxxxx>
> Philippe :-)
Applied on drm-misc-next.
Thanks,
Benjamin
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
