On Thu, Jul 02, 2020 at 04:39:09PM +0530, Rajendra Nayak wrote:
> On SDM845 and SC7180 DSI needs to express a performance state
> requirement on a power domain depending on the clock rates.
> Use OPP table from DT to register with OPP framework and use
> dev_pm_opp_set_rate() to set the clk/perf state.
>
> dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate()
> for devices without an OPP table, hence the change works fine
> on devices/platforms which only need to set a clock rate.
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/dsi/dsi_host.c | 26 ++++++++++++++++++++++++--
> 1 file changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 11ae5b8..09e16b8 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -14,6 +14,7 @@
> #include <linux/of_graph.h>
> #include <linux/of_irq.h>
> #include <linux/pinctrl/consumer.h>
> +#include <linux/pm_opp.h>
> #include <linux/regmap.h>
> #include <linux/regulator/consumer.h>
> #include <linux/spinlock.h>
> @@ -111,6 +112,9 @@ struct msm_dsi_host {
> struct clk *pixel_clk_src;
> struct clk *byte_intf_clk;
>
> + struct opp_table *opp_table;
> + bool has_opp_table;
> +
> u32 byte_clk_rate;
> u32 pixel_clk_rate;
> u32 esc_clk_rate;
> @@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
> DBG("Set clk rates: pclk=%d, byteclk=%d",
> msm_host->mode->clock, msm_host->byte_clk_rate);
>
> - ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
> + ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
> + msm_host->byte_clk_rate);
> if (ret) {
> - pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
> + pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
> return ret;
> }
>
> @@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
>
> void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
> {
> + /* Drop the performance state vote */
> + dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
> clk_disable_unprepare(msm_host->esc_clk);
> clk_disable_unprepare(msm_host->pixel_clk);
> if (msm_host->byte_intf_clk)
> @@ -1879,6 +1886,18 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
> goto fail;
> }
>
> + msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
> + if (IS_ERR(msm_host->opp_table))
> + return PTR_ERR(msm_host->opp_table);
> + /* OPP table is optional */
> + ret = dev_pm_opp_of_add_table(&pdev->dev);
> + if (!ret) {
> + msm_host->has_opp_table = true;
> + } else if (ret != -ENODEV) {
> + dev_err(&pdev->dev, "invalid OPP table in device tree\n");
dev_pm_opp_put_clkname(msm_host->opp_table);
> + return ret;
> + }
With the missing _put_clkname() fixed:
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
