Hi Icenowy, On Wed, Jul 01, 2020 at 08:01:14PM +0800, Icenowy Zheng wrote: > > > 于 2020年7月1日 GMT+08:00 下午6:31:26, Ondrej Jirman <megous@xxxxxxxxxx> 写到: > >Pinephone has a Goodix GT917S capacitive touchscreen controller on > >I2C0 bus. Add support for it. > > > >Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx> > >Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > >--- > > .../dts/allwinner/sun50i-a64-pinephone.dtsi | 19 +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > > >diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi > >b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi > >index 85a7aa5efd32..2d5694446d17 100644 > >--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi > >+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi > >@@ -123,6 +123,25 @@ &ehci1 { > > status = "okay"; > > }; > > > >+&i2c0 { > >+ pinctrl-names = "default"; > >+ pinctrl-0 = <&i2c0_pins>; > >+ status = "okay"; > >+ > >+ touchscreen@5d { > >+ compatible = "goodix,gt917s", "goodix,gt911"; > > Please drop gt911 here. GT917S belong to the GT1x product line, not the same line with GT911. > > You will see this in the driver. Right. I'll do so in v8. thnk you and regards, o. > >+ reg = <0x5d>; > >+ interrupt-parent = <&pio>; > >+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ > >+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ > >+ reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ > >+ AVDD28-supply = <®_ldo_io0>; > >+ VDDIO-supply = <®_ldo_io0>; > >+ touchscreen-size-x = <720>; > >+ touchscreen-size-y = <1440>; > >+ }; > >+}; > >+ > > &i2c1 { > > status = "okay"; > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel