On Wed, Jul 1, 2020 at 6:30 PM Ondřej Jirman <megous@xxxxxxxxxx> wrote: > On Wed, Jul 01, 2020 at 05:25:32PM +0200, Sam Ravnborg wrote: > > Hi Ondrej. > > > > On Wed, Jul 01, 2020 at 12:31:13PM +0200, Ondrej Jirman wrote: > > > This patchset adds support for the LCD panel of PinePhone. > > > > > > I've tested this on PinePhone 1.0 and 1.2. > > > > > > Please take a look. > > > > > > thank you and regards, > > > Ondrej Jirman > > > > > > Changes in v6: > > > - Fixed spacing in yaml > > > - Fixed wrong vccio->iovcc supply name in the bindings doc > > > - I noticed that the original driver uses a delay of 20ms in the init > > > function to achieve a combined total of 120ms required from post-reset > > > to display_on. I've added a similar delay to xbd599_init, so that > > > xbd599 panel also has the right timing. (patch 9) > > > - v5->v6 diff: https://megous.com/dl/tmp/v5-v6.patch > > > - Added review/ack tags > > > - Learned to run dt_binding_check by myself ;) > > The patch-set does not apply clean on top of drm-misc-next - due to > > vrefresh removal. > > Please re-spin. > > Sorry for that. Rebased and retested. Sam will you apply it? I was in the middle of applying and ran into the same issue :D Yours, Linus Walleij _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
