Hi Paul.
On Tue, Jun 30, 2020 at 01:52:09AM +0200, Paul Cercueil wrote:
> Add support for the Image Processing Unit (IPU) found in all Ingenic
> SoCs.
>
> The IPU can upscale and downscale a source frame of arbitrary size
> ranging from 4x4 to 4096x4096 on newer SoCs, with bicubic filtering
> on newer SoCs, bilinear filtering on older SoCs. Nearest-neighbour can
> also be obtained with proper coefficients.
>
> Starting from the JZ4725B, the IPU supports a mode where its output is
> sent directly to the LCDC, without having to be written to RAM first.
> This makes it possible to use the IPU as a DRM plane on the compatible
> SoCs, and have it convert and scale anything the userspace asks for to
> what's available for the display.
>
> Regarding pixel formats, older SoCs support packed YUV 4:2:2 and various
> planar YUV formats. Newer SoCs introduced support for RGB.
>
> Since the IPU is a separate hardware block, to make it work properly the
> Ingenic DRM driver will now register itself as a component master in
> case the IPU driver has been enabled in the config.
I cannot see why this driver needs the component framework to deal with
the IPU. It looks like a left-over from when this was two modules.
While browsing the code the code now has two independent struct
soc_info. It would be simpler with only one - at least if it is the
same logic that is used in both cases.
So open question - can this be simplified more than it is today and
is the use of the component framework mandatory?
Sam
>
> When enabled in the config, the CRTC will see the IPU as a second primary
> plane. It cannot be enabled at the same time as the regular primary
> plane. It has the same priority, which means that it will also display
> below the overlay plane.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
>
> Notes:
> v2: - ingenic-ipu is no longer its own module. It will be built
> into the ingenic-drm module.
> - If enabled in the config, both the core driver and the IPU
> driver will register as components; otherwise the core
> driver will bypass that and call the ingenic_drm_bind()
> function directly.
> - Since both files now build into the same module, the
> symbols previously exported as GPL are not exported anymore,
> since they are only used internally.
> - Fix SPDX license header in ingenic-ipu.h
> - Avoid using 'for(;;);' loops without trailing statement(s)
>
> drivers/gpu/drm/ingenic/Kconfig | 11 +
> drivers/gpu/drm/ingenic/Makefile | 3 +-
> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 155 +++-
> drivers/gpu/drm/ingenic/ingenic-drm.h | 12 +
> drivers/gpu/drm/ingenic/ingenic-ipu.c | 848 ++++++++++++++++++++++
> drivers/gpu/drm/ingenic/ingenic-ipu.h | 109 +++
> 6 files changed, 1122 insertions(+), 16 deletions(-)
> create mode 100644 drivers/gpu/drm/ingenic/ingenic-ipu.c
> create mode 100644 drivers/gpu/drm/ingenic/ingenic-ipu.h
>
> diff --git a/drivers/gpu/drm/ingenic/Kconfig b/drivers/gpu/drm/ingenic/Kconfig
> index d82c3d37ec9c..477d5387e43e 100644
> --- a/drivers/gpu/drm/ingenic/Kconfig
> +++ b/drivers/gpu/drm/ingenic/Kconfig
> @@ -14,3 +14,14 @@ config DRM_INGENIC
> Choose this option for DRM support for the Ingenic SoCs.
>
> If M is selected the module will be called ingenic-drm.
> +
> +if DRM_INGENIC
> +
> +config DRM_INGENIC_IPU
> + bool "IPU support for Ingenic SoCs"
> + help
> + Choose this option to enable support for the IPU found in Ingenic SoCs.
> +
> + The Image Processing Unit (IPU) will appear as a second primary plane.
> +
> +endif
> diff --git a/drivers/gpu/drm/ingenic/Makefile b/drivers/gpu/drm/ingenic/Makefile
> index 9875628dd8bc..d313326bdddb 100644
> --- a/drivers/gpu/drm/ingenic/Makefile
> +++ b/drivers/gpu/drm/ingenic/Makefile
> @@ -1,2 +1,3 @@
> obj-$(CONFIG_DRM_INGENIC) += ingenic-drm.o
> -ingenic-drm-y += ingenic-drm-drv.o
> +ingenic-drm-y = ingenic-drm-drv.o
> +ingenic-drm-$(CONFIG_DRM_INGENIC_IPU) += ingenic-ipu.o
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index a8573da1d577..36440acd23de 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -6,6 +6,7 @@
>
> #include "ingenic-drm.h"
>
> +#include <linux/component.h>
> #include <linux/clk.h>
> #include <linux/dma-mapping.h>
> #include <linux/module.h>
> @@ -49,7 +50,7 @@ struct jz_soc_info {
>
> struct ingenic_drm {
> struct drm_device drm;
> - struct drm_plane f0, f1;
> + struct drm_plane f0, f1, *ipu_plane;
> struct drm_crtc crtc;
> struct drm_encoder encoder;
>
> @@ -185,13 +186,16 @@ static void ingenic_drm_crtc_update_timings(struct ingenic_drm *priv,
> regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
> JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16,
> JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16);
> +
> + regmap_write(priv->map, JZ_REG_LCD_IPUR, JZ_LCD_IPUR_IPUREN |
> + (ht * vpe / 3) << JZ_LCD_IPUR_IPUR_LSB);
> }
>
> static int ingenic_drm_crtc_atomic_check(struct drm_crtc *crtc,
> struct drm_crtc_state *state)
> {
> struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
> - struct drm_plane_state *f1_state, *f0_state;
> + struct drm_plane_state *f1_state, *f0_state, *ipu_state;
> long rate;
>
> if (!drm_atomic_crtc_needs_modeset(state))
> @@ -210,14 +214,40 @@ static int ingenic_drm_crtc_atomic_check(struct drm_crtc *crtc,
> f1_state = drm_atomic_get_plane_state(state->state, &priv->f1);
> f0_state = drm_atomic_get_plane_state(state->state, &priv->f0);
>
> + if (priv->ipu_plane)
> + ipu_state = drm_atomic_get_plane_state(state->state, priv->ipu_plane);
> +
> + /* IPU and F1 planes cannot be enabled at the same time. */
> + if (priv->ipu_plane && f1_state->fb && ipu_state->fb) {
> + dev_dbg(priv->dev, "Cannot enable both F1 and IPU\n");
> + return -EINVAL;
> + }
> +
> /* If all the planes are disabled, we won't get a VBLANK IRQ */
> - if (!f1_state->fb && !f0_state->fb)
> + if (!f1_state->fb && !f0_state->fb &&
> + !(priv->ipu_plane && ipu_state->fb))
> state->no_vblank = true;
> }
>
> return 0;
> }
>
> +static void ingenic_drm_crtc_atomic_begin(struct drm_crtc *crtc,
> + struct drm_crtc_state *oldstate)
> +{
> + struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
> + u32 ctrl = 0;
> +
> + if (priv->soc_info->has_osd &&
> + drm_atomic_crtc_needs_modeset(crtc->state)) {
> + if (priv->ipu_plane && priv->ipu_plane->state->fb)
> + ctrl |= JZ_LCD_OSDCTRL_IPU;
> +
> + regmap_update_bits(priv->map, JZ_REG_LCD_OSDCTRL,
> + JZ_LCD_OSDCTRL_IPU, ctrl);
> + }
> +}
> +
> static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc,
> struct drm_crtc_state *oldstate)
> {
> @@ -303,10 +333,9 @@ static void ingenic_drm_plane_enable(struct ingenic_drm *priv,
> }
> }
>
> -static void ingenic_drm_plane_atomic_disable(struct drm_plane *plane,
> - struct drm_plane_state *old_state)
> +void ingenic_drm_plane_disable(struct device *dev, struct drm_plane *plane)
> {
> - struct ingenic_drm *priv = drm_device_get_priv(plane->dev);
> + struct ingenic_drm *priv = dev_get_drvdata(dev);
> unsigned int en_bit;
>
> if (priv->soc_info->has_osd) {
> @@ -319,9 +348,18 @@ static void ingenic_drm_plane_atomic_disable(struct drm_plane *plane,
> }
> }
>
> -static void ingenic_drm_plane_config(struct ingenic_drm *priv,
> - struct drm_plane *plane, u32 fourcc)
> +static void ingenic_drm_plane_atomic_disable(struct drm_plane *plane,
> + struct drm_plane_state *old_state)
> {
> + struct ingenic_drm *priv = drm_device_get_priv(plane->dev);
> +
> + ingenic_drm_plane_disable(priv->dev, plane);
> +}
> +
> +void ingenic_drm_plane_config(struct device *dev,
> + struct drm_plane *plane, u32 fourcc)
> +{
> + struct ingenic_drm *priv = dev_get_drvdata(dev);
> struct drm_plane_state *state = plane->state;
> unsigned int xy_reg, size_reg;
> unsigned int ctrl = 0;
> @@ -404,7 +442,7 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
> priv->dma_hwdesc[hwdesc_idx]->cmd |= JZ_LCD_CMD_EOF_IRQ;
>
> if (drm_atomic_crtc_needs_modeset(state->crtc->state))
> - ingenic_drm_plane_config(priv, plane,
> + ingenic_drm_plane_config(priv->dev, plane,
> state->fb->format->format);
> }
> }
> @@ -574,6 +612,7 @@ static const struct drm_plane_helper_funcs ingenic_drm_plane_helper_funcs = {
> static const struct drm_crtc_helper_funcs ingenic_drm_crtc_helper_funcs = {
> .atomic_enable = ingenic_drm_crtc_atomic_enable,
> .atomic_disable = ingenic_drm_crtc_atomic_disable,
> + .atomic_begin = ingenic_drm_crtc_atomic_begin,
> .atomic_flush = ingenic_drm_crtc_atomic_flush,
> .atomic_check = ingenic_drm_crtc_atomic_check,
> };
> @@ -600,10 +639,17 @@ static void ingenic_drm_free_dma_hwdesc(void *d)
> priv->dma_hwdesc[1], priv->dma_hwdesc_phys[1]);
> }
>
> -static int ingenic_drm_probe(struct platform_device *pdev)
> +static void ingenic_drm_unbind_all(void *d)
> +{
> + struct ingenic_drm *priv = d;
> +
> + component_unbind_all(priv->dev, &priv->drm);
> +}
> +
> +static int ingenic_drm_bind(struct device *dev)
> {
> + struct platform_device *pdev = to_platform_device(dev);
> const struct jz_soc_info *soc_info;
> - struct device *dev = &pdev->dev;
> struct ingenic_drm *priv;
> struct clk *parent_clk;
> struct drm_bridge *bridge;
> @@ -640,6 +686,19 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> drm->mode_config.max_height = 4095;
> drm->mode_config.funcs = &ingenic_drm_mode_config_funcs;
>
> + if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) {
> + ret = component_bind_all(dev, drm);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "Failed to bind components: %i\n", ret);
> + return ret;
> + }
> +
> + ret = devm_add_action_or_reset(dev, ingenic_drm_unbind_all, priv);
> + if (ret)
> + return ret;
> + }
> +
> base = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(base)) {
> dev_err(dev, "Failed to get memory resource\n");
> @@ -704,6 +763,9 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + if (soc_info->has_osd)
> + priv->ipu_plane = drm_plane_from_index(drm, 0);
> +
> drm_plane_helper_add(&priv->f1, &ingenic_drm_plane_helper_funcs);
>
> ret = drm_universal_plane_init(drm, &priv->f1, 1,
> @@ -712,7 +774,7 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> ARRAY_SIZE(ingenic_drm_primary_formats),
> NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
> if (ret) {
> - dev_err(dev, "Failed to register primary plane: %i\n", ret);
> + dev_err(dev, "Failed to register plane: %i\n", ret);
> return ret;
> }
>
> @@ -828,9 +890,14 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> return ret;
> }
>
> -static int ingenic_drm_remove(struct platform_device *pdev)
> +static int compare_of(struct device *dev, void *data)
> {
> - struct ingenic_drm *priv = platform_get_drvdata(pdev);
> + return dev->of_node == data;
> +}
> +
> +static void ingenic_drm_unbind(struct device *dev)
> +{
> + struct ingenic_drm *priv = dev_get_drvdata(dev);
>
> if (priv->lcd_clk)
> clk_disable_unprepare(priv->lcd_clk);
> @@ -838,6 +905,42 @@ static int ingenic_drm_remove(struct platform_device *pdev)
>
> drm_dev_unregister(&priv->drm);
> drm_atomic_helper_shutdown(&priv->drm);
> +}
> +
> +static const struct component_master_ops ingenic_master_ops = {
> + .bind = ingenic_drm_bind,
> + .unbind = ingenic_drm_unbind,
> +};
> +
> +static int ingenic_drm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct component_match *match = NULL;
> + struct device_node *np;
> +
> + if (!IS_ENABLED(CONFIG_DRM_INGENIC_IPU))
> + return ingenic_drm_bind(dev);
> +
> + /* IPU is at port address 8 */
> + np = of_graph_get_remote_node(dev->of_node, 8, 0);
> + if (!np) {
> + dev_err(dev, "Unable to get IPU node\n");
> + return -EINVAL;
> + }
> +
> + drm_of_component_match_add(dev, &match, compare_of, np);
> +
> + return component_master_add_with_match(dev, &ingenic_master_ops, match);
> +}
> +
> +static int ingenic_drm_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> +
> + if (!IS_ENABLED(CONFIG_DRM_INGENIC_IPU))
> + ingenic_drm_unbind(dev);
> + else
> + component_master_del(dev, &ingenic_master_ops);
>
> return 0;
> }
> @@ -879,7 +982,29 @@ static struct platform_driver ingenic_drm_driver = {
> .probe = ingenic_drm_probe,
> .remove = ingenic_drm_remove,
> };
> -module_platform_driver(ingenic_drm_driver);
> +
> +static int ingenic_drm_init(void)
> +{
> + int err;
> +
> + if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) {
> + err = platform_driver_register(ingenic_ipu_driver_ptr);
> + if (err)
> + return err;
> + }
> +
> + return platform_driver_register(&ingenic_drm_driver);
> +}
> +module_init(ingenic_drm_init);
> +
> +static void ingenic_drm_exit(void)
> +{
> + platform_driver_unregister(&ingenic_drm_driver);
> +
> + if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU))
> + platform_driver_unregister(ingenic_ipu_driver_ptr);
> +}
> +module_exit(ingenic_drm_exit);
>
> MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
> MODULE_DESCRIPTION("DRM driver for the Ingenic SoCs\n");
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
> index d0b827a9fe83..43f7d959cff7 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
> @@ -8,6 +8,7 @@
> #define DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H
>
> #include <linux/bitops.h>
> +#include <linux/types.h>
>
> #define JZ_REG_LCD_CFG 0x00
> #define JZ_REG_LCD_VSYNC 0x04
> @@ -158,4 +159,15 @@
> #define JZ_LCD_SIZE01_WIDTH_LSB 0
> #define JZ_LCD_SIZE01_HEIGHT_LSB 16
>
> +struct device;
> +struct drm_plane;
> +struct drm_plane_state;
> +struct platform_driver;
> +
> +void ingenic_drm_plane_config(struct device *dev,
> + struct drm_plane *plane, u32 fourcc);
> +void ingenic_drm_plane_disable(struct device *dev, struct drm_plane *plane);
> +
> +extern struct platform_driver *ingenic_ipu_driver_ptr;
> +
> #endif /* DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H */
> diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.c b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> new file mode 100644
> index 000000000000..df7eb72df887
> --- /dev/null
> +++ b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> @@ -0,0 +1,848 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Ingenic JZ47xx IPU driver
> +//
> +// Copyright (C) 2020, Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> +
> +#include "ingenic-drm.h"
> +#include "ingenic-ipu.h"
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/gcd.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/time.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_plane.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drm_property.h>
> +#include <drm/drm_vblank.h>
> +
> +struct ingenic_ipu;
> +
> +struct soc_info {
> + const u32 *formats;
> + size_t num_formats;
> + bool has_bicubic;
> +
> + void (*set_coefs)(struct ingenic_ipu *ipu, unsigned int reg,
> + unsigned int sharpness, bool downscale,
> + unsigned int weight, unsigned int offset);
> +};
> +
> +struct ingenic_ipu {
> + struct drm_plane plane;
> + struct device *dev, *master;
> + struct regmap *map;
> + struct clk *clk;
> + const struct soc_info *soc_info;
> +
> + unsigned int numW, numH, denomW, denomH;
> +
> + struct drm_property *sharpness_prop;
> + unsigned int sharpness;
> +};
> +
> +/* Signed 15.16 fixed-point math (for bicubic scaling coefficients) */
> +#define I2F(i) ((s32)(i) * 65536)
> +#define F2I(f) ((f) / 65536)
> +#define FMUL(fa, fb) ((s32)(((s64)(fa) * (s64)(fb)) / 65536))
> +#define SHARPNESS_INCR (I2F(-1) / 8)
> +
> +static inline struct ingenic_ipu *plane_to_ingenic_ipu(struct drm_plane *plane)
> +{
> + return container_of(plane, struct ingenic_ipu, plane);
> +}
> +
> +/*
> + * Apply conventional cubic convolution kernel. Both parameters
> + * and return value are 15.16 signed fixed-point.
> + *
> + * @f_a: Sharpness factor, typically in range [-4.0, -0.25].
> + * A larger magnitude increases perceived sharpness, but going past
> + * -2.0 might cause ringing artifacts to outweigh any improvement.
> + * Nice values on a 320x240 LCD are between -0.75 and -2.0.
> + *
> + * @f_x: Absolute distance in pixels from 'pixel 0' sample position
> + * along horizontal (or vertical) source axis. Range is [0, +2.0].
> + *
> + * returns: Weight of this pixel within 4-pixel sample group. Range is
> + * [-2.0, +2.0]. For moderate (i.e. > -3.0) sharpness factors,
> + * range is within [-1.0, +1.0].
> + */
> +static inline s32 cubic_conv(s32 f_a, s32 f_x)
> +{
> + const s32 f_1 = I2F(1);
> + const s32 f_2 = I2F(2);
> + const s32 f_3 = I2F(3);
> + const s32 f_4 = I2F(4);
> + const s32 f_x2 = FMUL(f_x, f_x);
> + const s32 f_x3 = FMUL(f_x, f_x2);
> +
> + if (f_x <= f_1)
> + return FMUL((f_a + f_2), f_x3) - FMUL((f_a + f_3), f_x2) + f_1;
> + else if (f_x <= f_2)
> + return FMUL(f_a, (f_x3 - 5 * f_x2 + 8 * f_x - f_4));
> + else
> + return 0;
> +}
> +
> +/*
> + * On entry, "weight" is a coefficient suitable for bilinear mode,
> + * which is converted to a set of four suitable for bicubic mode.
> + *
> + * "weight 512" means all of pixel 0;
> + * "weight 256" means half of pixel 0 and half of pixel 1;
> + * "weight 0" means all of pixel 1;
> + *
> + * "offset" is increment to next source pixel sample location.
> + */
> +static void jz4760_set_coefs(struct ingenic_ipu *ipu, unsigned int reg,
> + unsigned int sharpness, bool downscale,
> + unsigned int weight, unsigned int offset)
> +{
> + u32 val;
> + s32 w0, w1, w2, w3; /* Pixel weights at X (or Y) offsets -1,0,1,2 */
> +
> + weight = clamp_val(weight, 0, 512);
> +
> + if (sharpness < 2) {
> + /*
> + * When sharpness setting is 0, emulate nearest-neighbor.
> + * When sharpness setting is 1, emulate bilinear.
> + */
> +
> + if (sharpness == 0)
> + weight = weight >= 256 ? 512 : 0;
> + w0 = 0;
> + w1 = weight;
> + w2 = 512 - weight;
> + w3 = 0;
> + } else {
> + const s32 f_a = SHARPNESS_INCR * sharpness;
> + const s32 f_h = I2F(1) / 2; /* Round up 0.5 */
> +
> + /*
> + * Note that always rounding towards +infinity here is intended.
> + * The resulting coefficients match a round-to-nearest-int
> + * double floating-point implementation.
> + */
> +
> + weight = 512 - weight;
> + w0 = F2I(f_h + 512 * cubic_conv(f_a, I2F(512 + weight) / 512));
> + w1 = F2I(f_h + 512 * cubic_conv(f_a, I2F(0 + weight) / 512));
> + w2 = F2I(f_h + 512 * cubic_conv(f_a, I2F(512 - weight) / 512));
> + w3 = F2I(f_h + 512 * cubic_conv(f_a, I2F(1024 - weight) / 512));
> + w0 = clamp_val(w0, -1024, 1023);
> + w1 = clamp_val(w1, -1024, 1023);
> + w2 = clamp_val(w2, -1024, 1023);
> + w3 = clamp_val(w3, -1024, 1023);
> + }
> +
> + val = ((w1 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF31_LSB) |
> + ((w0 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF20_LSB);
> + regmap_write(ipu->map, reg, val);
> +
> + val = ((w3 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF31_LSB) |
> + ((w2 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF20_LSB) |
> + ((offset & JZ4760_IPU_RSZ_OFFSET_MASK) << JZ4760_IPU_RSZ_OFFSET_LSB);
> + regmap_write(ipu->map, reg, val);
> +}
> +
> +static void jz4725b_set_coefs(struct ingenic_ipu *ipu, unsigned int reg,
> + unsigned int sharpness, bool downscale,
> + unsigned int weight, unsigned int offset)
> +{
> + u32 val = JZ4725B_IPU_RSZ_LUT_OUT_EN;
> + unsigned int i;
> +
> + weight = clamp_val(weight, 0, 512);
> +
> + if (sharpness == 0)
> + weight = weight >= 256 ? 512 : 0;
> +
> + val |= (weight & JZ4725B_IPU_RSZ_LUT_COEF_MASK) << JZ4725B_IPU_RSZ_LUT_COEF_LSB;
> + if (downscale || !!offset)
> + val |= JZ4725B_IPU_RSZ_LUT_IN_EN;
> +
> + regmap_write(ipu->map, reg, val);
> +
> + if (downscale) {
> + for (i = 1; i < offset; i++)
> + regmap_write(ipu->map, reg, JZ4725B_IPU_RSZ_LUT_IN_EN);
> + }
> +}
> +
> +static void ingenic_ipu_set_downscale_coefs(struct ingenic_ipu *ipu,
> + unsigned int reg,
> + unsigned int num,
> + unsigned int denom)
> +{
> + unsigned int i, offset, weight, weight_num = denom;
> +
> + for (i = 0; i < num; i++) {
> + weight_num = num + (weight_num - num) % (num * 2);
> + weight = 512 - 512 * (weight_num - num) / (num * 2);
> + weight_num += denom * 2;
> + offset = (weight_num - num) / (num * 2);
> +
> + ipu->soc_info->set_coefs(ipu, reg, ipu->sharpness,
> + true, weight, offset);
> + }
> +}
> +
> +static void ingenic_ipu_set_integer_upscale_coefs(struct ingenic_ipu *ipu,
> + unsigned int reg,
> + unsigned int num)
> +{
> + /*
> + * Force nearest-neighbor scaling and use simple math when upscaling
> + * by an integer ratio. It looks better, and fixes a few problem cases.
> + */
> + unsigned int i;
> +
> + for (i = 0; i < num; i++)
> + ipu->soc_info->set_coefs(ipu, reg, 0, false, 512, i == num - 1);
> +}
> +
> +static void ingenic_ipu_set_upscale_coefs(struct ingenic_ipu *ipu,
> + unsigned int reg,
> + unsigned int num,
> + unsigned int denom)
> +{
> + unsigned int i, offset, weight, weight_num = 0;
> +
> + for (i = 0; i < num; i++) {
> + weight = 512 - 512 * weight_num / num;
> + weight_num += denom;
> + offset = weight_num >= num;
> +
> + if (offset)
> + weight_num -= num;
> +
> + ipu->soc_info->set_coefs(ipu, reg, ipu->sharpness,
> + false, weight, offset);
> + }
> +}
> +
> +static void ingenic_ipu_set_coefs(struct ingenic_ipu *ipu, unsigned int reg,
> + unsigned int num, unsigned int denom)
> +{
> + /* Begin programming the LUT */
> + regmap_write(ipu->map, reg, -1);
> +
> + if (denom > num)
> + ingenic_ipu_set_downscale_coefs(ipu, reg, num, denom);
> + else if (denom == 1)
> + ingenic_ipu_set_integer_upscale_coefs(ipu, reg, num);
> + else
> + ingenic_ipu_set_upscale_coefs(ipu, reg, num, denom);
> +}
> +
> +static int reduce_fraction(unsigned int *num, unsigned int *denom)
> +{
> + unsigned long d = gcd(*num, *denom);
> +
> + /* The scaling table has only 31 entries */
> + if (*num > 31 * d)
> + return -EINVAL;
> +
> + *num /= d;
> + *denom /= d;
> + return 0;
> +}
> +
> +static inline bool scaling_required(struct drm_plane_state *state)
> +{
> + return (state->src_w >> 16) != state->crtc_w &&
> + (state->src_h >> 16) != state->crtc_h;
> +}
> +
> +static inline bool osd_changed(struct drm_plane_state *state,
> + struct drm_plane_state *oldstate)
> +{
> + return state->crtc_x != oldstate->crtc_x ||
> + state->crtc_y != oldstate->crtc_y ||
> + state->crtc_w != oldstate->crtc_w ||
> + state->crtc_h != oldstate->crtc_h;
> +}
> +
> +static void ingenic_ipu_plane_atomic_update(struct drm_plane *plane,
> + struct drm_plane_state *oldstate)
> +{
> + struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> + struct drm_plane_state *state = plane->state;
> + const struct drm_format_info *finfo;
> + u32 ctrl, stride = 0, coef_index = 0, format = 0;
> + bool needs_modeset, upscaling_w, upscaling_h;
> + dma_addr_t addr;
> +
> + if (!state || !state->fb)
> + return;
> +
> + finfo = drm_format_info(state->fb->format->format);
> +
> + /* Reset all the registers if needed */
> + needs_modeset = drm_atomic_crtc_needs_modeset(state->crtc->state);
> + if (needs_modeset)
> + regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_RST);
> +
> + /* Enable the chip */
> + regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CHIP_EN);
> +
> + /* Set addresses */
> + if (finfo->num_planes > 2) {
> + addr = drm_fb_cma_get_gem_addr(state->fb, state, 2);
> + regmap_write(ipu->map, JZ_REG_IPU_V_ADDR, addr);
> + }
> +
> + if (finfo->num_planes > 1) {
> + addr = drm_fb_cma_get_gem_addr(state->fb, state, 1);
> + regmap_write(ipu->map, JZ_REG_IPU_U_ADDR, addr);
> + }
> +
> + addr = drm_fb_cma_get_gem_addr(state->fb, state, 0);
> + regmap_write(ipu->map, JZ_REG_IPU_Y_ADDR, addr);
> +
> + if (!needs_modeset)
> + return;
> +
> + ingenic_drm_plane_config(ipu->master, plane, DRM_FORMAT_XRGB8888);
> +
> + /* Set the input height/width/strides */
> + if (finfo->num_planes > 2)
> + stride = ((state->src_w >> 16) * finfo->cpp[2] / finfo->hsub)
> + << JZ_IPU_UV_STRIDE_V_LSB;
> +
> + if (finfo->num_planes > 1)
> + stride |= ((state->src_w >> 16) * finfo->cpp[1] / finfo->hsub)
> + << JZ_IPU_UV_STRIDE_U_LSB;
> +
> + regmap_write(ipu->map, JZ_REG_IPU_UV_STRIDE, stride);
> +
> + stride = ((state->src_w >> 16) * finfo->cpp[0])
> + << JZ_IPU_Y_STRIDE_Y_LSB;
> + regmap_write(ipu->map, JZ_REG_IPU_Y_STRIDE, stride);
> +
> + regmap_write(ipu->map, JZ_REG_IPU_IN_GS,
> + (stride << JZ_IPU_IN_GS_W_LSB) |
> + ((state->src_h >> 16) << JZ_IPU_IN_GS_H_LSB));
> +
> + switch (finfo->format) {
> + case DRM_FORMAT_XRGB1555:
> + format = JZ_IPU_D_FMT_IN_FMT_RGB555 |
> + JZ_IPU_D_FMT_RGB_OUT_OFT_RGB;
> + break;
> + case DRM_FORMAT_XBGR1555:
> + format = JZ_IPU_D_FMT_IN_FMT_RGB555 |
> + JZ_IPU_D_FMT_RGB_OUT_OFT_BGR;
> + break;
> + case DRM_FORMAT_RGB565:
> + format = JZ_IPU_D_FMT_IN_FMT_RGB565 |
> + JZ_IPU_D_FMT_RGB_OUT_OFT_RGB;
> + break;
> + case DRM_FORMAT_BGR565:
> + format = JZ_IPU_D_FMT_IN_FMT_RGB565 |
> + JZ_IPU_D_FMT_RGB_OUT_OFT_BGR;
> + break;
> + case DRM_FORMAT_XRGB8888:
> + format = JZ_IPU_D_FMT_IN_FMT_RGB888 |
> + JZ_IPU_D_FMT_RGB_OUT_OFT_RGB;
> + break;
> + case DRM_FORMAT_XBGR8888:
> + format = JZ_IPU_D_FMT_IN_FMT_RGB888 |
> + JZ_IPU_D_FMT_RGB_OUT_OFT_BGR;
> + break;
> + case DRM_FORMAT_YUYV:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV422 |
> + JZ_IPU_D_FMT_YUV_VY1UY0;
> + break;
> + case DRM_FORMAT_YVYU:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV422 |
> + JZ_IPU_D_FMT_YUV_UY1VY0;
> + break;
> + case DRM_FORMAT_UYVY:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV422 |
> + JZ_IPU_D_FMT_YUV_Y1VY0U;
> + break;
> + case DRM_FORMAT_VYUY:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV422 |
> + JZ_IPU_D_FMT_YUV_Y1UY0V;
> + break;
> + case DRM_FORMAT_YUV411:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV411;
> + break;
> + case DRM_FORMAT_YUV420:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV420;
> + break;
> + case DRM_FORMAT_YUV422:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV422;
> + break;
> + case DRM_FORMAT_YUV444:
> + format = JZ_IPU_D_FMT_IN_FMT_YUV444;
> + break;
> + default:
> + WARN_ONCE(1, "Unsupported format");
> + break;
> + }
> +
> + /* Fix output to RGB888 */
> + format |= JZ_IPU_D_FMT_OUT_FMT_RGB888;
> +
> + /* Set pixel format */
> + regmap_write(ipu->map, JZ_REG_IPU_D_FMT, format);
> +
> + /* Set the output height/width/stride */
> + regmap_write(ipu->map, JZ_REG_IPU_OUT_GS,
> + ((state->crtc_w * 4) << JZ_IPU_OUT_GS_W_LSB)
> + | state->crtc_h << JZ_IPU_OUT_GS_H_LSB);
> + regmap_write(ipu->map, JZ_REG_IPU_OUT_STRIDE, state->crtc_w * 4);
> +
> + ctrl = JZ_IPU_CTRL_LCDC_SEL | JZ_IPU_CTRL_FM_IRQ_EN;
> +
> + if (finfo->num_planes == 1)
> + ctrl |= JZ_IPU_CTRL_SPKG_SEL;
> + if (finfo->is_yuv)
> + ctrl |= JZ_IPU_CTRL_CSC_EN;
> +
> + regmap_update_bits(ipu->map, JZ_REG_IPU_CTRL,
> + JZ_IPU_CTRL_LCDC_SEL | JZ_IPU_CTRL_FM_IRQ_EN |
> + JZ_IPU_CTRL_SPKG_SEL | JZ_IPU_CTRL_CSC_EN, ctrl);
> +
> + if (finfo->is_yuv) {
> + /*
> + * Offsets for Chroma/Luma.
> + * y = source Y - LUMA,
> + * u = source Cb - CHROMA,
> + * v = source Cr - CHROMA
> + */
> + regmap_write(ipu->map, JZ_REG_IPU_CSC_OFFSET,
> + 128 << JZ_IPU_CSC_OFFSET_CHROMA_LSB |
> + 0 << JZ_IPU_CSC_OFFSET_LUMA_LSB);
> +
> + /*
> + * YUV422 to RGB conversion table.
> + * R = C0 / 0x400 * y + C1 / 0x400 * v
> + * G = C0 / 0x400 * y - C2 / 0x400 * u - C3 / 0x400 * v
> + * B = C0 / 0x400 * y + C4 / 0x400 * u
> + */
> + regmap_write(ipu->map, JZ_REG_IPU_CSC_C0_COEF, 0x4a8);
> + regmap_write(ipu->map, JZ_REG_IPU_CSC_C1_COEF, 0x662);
> + regmap_write(ipu->map, JZ_REG_IPU_CSC_C2_COEF, 0x191);
> + regmap_write(ipu->map, JZ_REG_IPU_CSC_C3_COEF, 0x341);
> + regmap_write(ipu->map, JZ_REG_IPU_CSC_C4_COEF, 0x811);
> + }
> +
> + ctrl = 0;
> +
> + /*
> + * Must set ZOOM_SEL before programming bicubic LUTs.
> + * If the IPU supports bicubic, we enable it unconditionally, since it
> + * can do anything bilinear can and more.
> + */
> + if (ipu->soc_info->has_bicubic)
> + ctrl |= JZ_IPU_CTRL_ZOOM_SEL;
> +
> + upscaling_w = ipu->numW > ipu->denomW;
> + if (upscaling_w)
> + ctrl |= JZ_IPU_CTRL_HSCALE;
> +
> + if (ipu->numW != 1 || ipu->denomW != 1) {
> + if (!ipu->soc_info->has_bicubic && !upscaling_w)
> + coef_index |= (ipu->denomW - 1) << 16;
> + else
> + coef_index |= (ipu->numW - 1) << 16;
> + ctrl |= JZ_IPU_CTRL_HRSZ_EN;
> + }
> +
> + upscaling_h = ipu->numH > ipu->denomH;
> + if (upscaling_h)
> + ctrl |= JZ_IPU_CTRL_VSCALE;
> +
> + if (ipu->numH != 1 || ipu->denomH != 1) {
> + if (!ipu->soc_info->has_bicubic && !upscaling_h)
> + coef_index |= ipu->denomH - 1;
> + else
> + coef_index |= ipu->numH - 1;
> + ctrl |= JZ_IPU_CTRL_VRSZ_EN;
> + }
> +
> + regmap_update_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_ZOOM_SEL |
> + JZ_IPU_CTRL_HRSZ_EN | JZ_IPU_CTRL_VRSZ_EN |
> + JZ_IPU_CTRL_HSCALE | JZ_IPU_CTRL_VSCALE, ctrl);
> +
> + /* Set the LUT index register */
> + regmap_write(ipu->map, JZ_REG_IPU_RSZ_COEF_INDEX, coef_index);
> +
> + if (ipu->numW != 1 || ipu->denomW != 1)
> + ingenic_ipu_set_coefs(ipu, JZ_REG_IPU_HRSZ_COEF_LUT,
> + ipu->numW, ipu->denomW);
> +
> + if (ipu->numH != 1 || ipu->denomH != 1)
> + ingenic_ipu_set_coefs(ipu, JZ_REG_IPU_VRSZ_COEF_LUT,
> + ipu->numH, ipu->denomH);
> +
> + /* Clear STATUS register */
> + regmap_write(ipu->map, JZ_REG_IPU_STATUS, 0);
> +
> + /* Start IPU */
> + regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_RUN);
> +
> + dev_dbg(ipu->dev, "Scaling %ux%u to %ux%u (%u:%u horiz, %u:%u vert)\n",
> + state->src_w >> 16, state->src_h >> 16,
> + state->crtc_w, state->crtc_h,
> + ipu->numW, ipu->denomW, ipu->numH, ipu->denomH);
> +}
> +
> +static int ingenic_ipu_plane_atomic_check(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + unsigned int numW, denomW, numH, denomH, xres, yres;
> + struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> + struct drm_crtc *crtc = state->crtc ?: plane->state->crtc;
> + struct drm_crtc_state *crtc_state;
> +
> + if (!crtc)
> + return 0;
> +
> + crtc_state = drm_atomic_get_existing_crtc_state(state->state, crtc);
> + if (WARN_ON(!crtc_state))
> + return -EINVAL;
> +
> + /* Request a full modeset if we are enabling or disabling the IPU. */
> + if (!plane->state->crtc ^ !state->crtc)
> + crtc_state->mode_changed = true;
> +
> + if (!state->crtc ||
> + !crtc_state->mode.hdisplay || !crtc_state->mode.vdisplay)
> + return 0;
> +
> + /* Plane must be fully visible */
> + if (state->crtc_x < 0 || state->crtc_y < 0 ||
> + state->crtc_x + state->crtc_w > crtc_state->mode.hdisplay ||
> + state->crtc_y + state->crtc_h > crtc_state->mode.vdisplay)
> + return -EINVAL;
> +
> + /* Minimum size is 4x4 */
> + if ((state->src_w >> 16) < 4 || (state->src_h >> 16) < 4)
> + return -EINVAL;
> +
> + /* Input and output lines must have an even number of pixels. */
> + if (((state->src_w >> 16) & 1) || (state->crtc_w & 1))
> + return -EINVAL;
> +
> + if (!scaling_required(state)) {
> + if (plane->state && osd_changed(state, plane->state))
> + crtc_state->mode_changed = true;
> +
> + ipu->numW = ipu->numH = ipu->denomW = ipu->denomH = 1;
> + return 0;
> + }
> +
> + crtc_state->mode_changed = true;
> +
> + xres = state->src_w >> 16;
> + yres = state->src_h >> 16;
> +
> + /* Adjust the coefficients until we find a valid configuration */
> + for (denomW = xres, numW = state->crtc_w;
> + numW <= crtc_state->mode.hdisplay; numW++)
> + if (!reduce_fraction(&numW, &denomW))
> + break;
> + if (numW > crtc_state->mode.hdisplay)
> + return -EINVAL;
> +
> + for (denomH = yres, numH = state->crtc_h;
> + numH <= crtc_state->mode.vdisplay; numH++)
> + if (!reduce_fraction(&numH, &denomH))
> + break;
> + if (numH > crtc_state->mode.vdisplay)
> + return -EINVAL;
> +
> + ipu->numW = numW;
> + ipu->numH = numH;
> + ipu->denomW = denomW;
> + ipu->denomH = denomH;
> +
> + return 0;
> +}
> +
> +static void ingenic_ipu_plane_atomic_disable(struct drm_plane *plane,
> + struct drm_plane_state *old_state)
> +{
> + struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> +
> + regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_STOP);
> + regmap_clear_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CHIP_EN);
> +
> + ingenic_drm_plane_disable(ipu->master, plane);
> +}
> +
> +static const struct drm_plane_helper_funcs ingenic_ipu_plane_helper_funcs = {
> + .atomic_update = ingenic_ipu_plane_atomic_update,
> + .atomic_check = ingenic_ipu_plane_atomic_check,
> + .atomic_disable = ingenic_ipu_plane_atomic_disable,
> + .prepare_fb = drm_gem_fb_prepare_fb,
> +};
> +
> +static int
> +ingenic_ipu_plane_atomic_get_property(struct drm_plane *plane,
> + const struct drm_plane_state *state,
> + struct drm_property *property, u64 *val)
> +{
> + struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> +
> + if (property != ipu->sharpness_prop)
> + return -EINVAL;
> +
> + *val = ipu->sharpness;
> +
> + return 0;
> +}
> +
> +static int
> +ingenic_ipu_plane_atomic_set_property(struct drm_plane *plane,
> + struct drm_plane_state *state,
> + struct drm_property *property, u64 val)
> +{
> + struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> + struct drm_crtc_state *crtc_state;
> +
> + if (property != ipu->sharpness_prop)
> + return -EINVAL;
> +
> + ipu->sharpness = val;
> +
> + if (state->crtc) {
> + crtc_state = drm_atomic_get_existing_crtc_state(state->state, state->crtc);
> + if (WARN_ON(!crtc_state))
> + return -EINVAL;
> +
> + crtc_state->mode_changed = true;
> + }
> +
> + return 0;
> +}
> +
> +static const struct drm_plane_funcs ingenic_ipu_plane_funcs = {
> + .update_plane = drm_atomic_helper_update_plane,
> + .disable_plane = drm_atomic_helper_disable_plane,
> + .reset = drm_atomic_helper_plane_reset,
> + .destroy = drm_plane_cleanup,
> +
> + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +
> + .atomic_get_property = ingenic_ipu_plane_atomic_get_property,
> + .atomic_set_property = ingenic_ipu_plane_atomic_set_property,
> +};
> +
> +static irqreturn_t ingenic_ipu_irq_handler(int irq, void *arg)
> +{
> + struct drm_plane *plane = drm_plane_from_index(arg, 0);
> + struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> + struct drm_crtc *crtc = drm_crtc_from_index(arg, 0);
> +
> + regmap_write(ipu->map, JZ_REG_IPU_STATUS, 0);
> +
> + drm_crtc_handle_vblank(crtc);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static const struct regmap_config ingenic_ipu_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +
> + .max_register = JZ_REG_IPU_OUT_PHY_T_ADDR,
> +};
> +
> +static int ingenic_ipu_bind(struct device *dev, struct device *master, void *d)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + const struct soc_info *soc_info;
> + struct drm_device *drm = d;
> + struct drm_plane *plane;
> + struct ingenic_ipu *ipu;
> + void __iomem *base;
> + unsigned int sharpness_max;
> + int err, irq;
> +
> + ipu = devm_kzalloc(dev, sizeof(*ipu), GFP_KERNEL);
> + if (!ipu)
> + return -ENOMEM;
> +
> + soc_info = of_device_get_match_data(dev);
> + if (!soc_info) {
> + dev_err(dev, "Missing platform data\n");
> + return -EINVAL;
> + }
> +
> + ipu->dev = dev;
> + ipu->master = master;
> + ipu->soc_info = soc_info;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base)) {
> + dev_err(dev, "Failed to get memory resource\n");
> + return PTR_ERR(base);
> + }
> +
> + ipu->map = devm_regmap_init_mmio(dev, base, &ingenic_ipu_regmap_config);
> + if (IS_ERR(ipu->map)) {
> + dev_err(dev, "Failed to create regmap\n");
> + return PTR_ERR(ipu->map);
> + }
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + ipu->clk = devm_clk_get(dev, "ipu");
> + if (IS_ERR(ipu->clk)) {
> + dev_err(dev, "Failed to get pixel clock\n");
> + return PTR_ERR(ipu->clk);
> + }
> +
> + err = devm_request_irq(dev, irq, ingenic_ipu_irq_handler, 0,
> + drm->driver->name, drm);
> + if (err) {
> + dev_err(dev, "Unable to request IRQ\n");
> + return err;
> + }
> +
> + plane = &ipu->plane;
> + dev_set_drvdata(dev, plane);
> +
> + drm_plane_helper_add(plane, &ingenic_ipu_plane_helper_funcs);
> +
> + err = drm_universal_plane_init(drm, plane, 1, &ingenic_ipu_plane_funcs,
> + soc_info->formats, soc_info->num_formats,
> + NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
> + if (err) {
> + dev_err(dev, "Failed to init plane: %i\n", err);
> + return err;
> + }
> +
> + /*
> + * Sharpness settings range is [0,32]
> + * 0 : nearest-neighbor
> + * 1 : bilinear
> + * 2 .. 32 : bicubic (translated to sharpness factor -0.25 .. -4.0)
> + */
> + sharpness_max = soc_info->has_bicubic ? 32 : 1;
> + ipu->sharpness_prop = drm_property_create_range(drm, 0, "sharpness",
> + 0, sharpness_max);
> + if (!ipu->sharpness_prop) {
> + dev_err(dev, "Unable to create sharpness property\n");
> + return -ENOMEM;
> + }
> +
> + /* Default sharpness factor: -0.125 * 8 = -1.0 */
> + ipu->sharpness = soc_info->has_bicubic ? 8 : 1;
> + drm_object_attach_property(&plane->base, ipu->sharpness_prop,
> + ipu->sharpness);
> +
> + err = clk_prepare_enable(ipu->clk);
> + if (err) {
> + dev_err(dev, "Unable to enable clock\n");
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static void ingenic_ipu_unbind(struct device *dev,
> + struct device *master, void *d)
> +{
> + struct ingenic_ipu *ipu = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(ipu->clk);
> +}
> +
> +static const struct component_ops ingenic_ipu_ops = {
> + .bind = ingenic_ipu_bind,
> + .unbind = ingenic_ipu_unbind,
> +};
> +
> +static int ingenic_ipu_probe(struct platform_device *pdev)
> +{
> + return component_add(&pdev->dev, &ingenic_ipu_ops);
> +}
> +
> +static int ingenic_ipu_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &ingenic_ipu_ops);
> + return 0;
> +}
> +
> +static const u32 jz4725b_ipu_formats[] = {
> + DRM_FORMAT_YUYV,
> + DRM_FORMAT_YVYU,
> + DRM_FORMAT_UYVY,
> + DRM_FORMAT_VYUY,
> + DRM_FORMAT_YUV411,
> + DRM_FORMAT_YUV420,
> + DRM_FORMAT_YUV422,
> + DRM_FORMAT_YUV444,
> +};
> +
> +static const struct soc_info jz4725b_soc_info = {
> + .formats = jz4725b_ipu_formats,
> + .num_formats = ARRAY_SIZE(jz4725b_ipu_formats),
> + .has_bicubic = false,
> + .set_coefs = jz4725b_set_coefs,
> +};
> +
> +static const u32 jz4760_ipu_formats[] = {
> + DRM_FORMAT_XRGB1555,
> + DRM_FORMAT_XBGR1555,
> + DRM_FORMAT_RGB565,
> + DRM_FORMAT_BGR565,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_XBGR8888,
> + DRM_FORMAT_YUYV,
> + DRM_FORMAT_YVYU,
> + DRM_FORMAT_UYVY,
> + DRM_FORMAT_VYUY,
> + DRM_FORMAT_YUV411,
> + DRM_FORMAT_YUV420,
> + DRM_FORMAT_YUV422,
> + DRM_FORMAT_YUV444,
> +};
> +
> +static const struct soc_info jz4760_soc_info = {
> + .formats = jz4760_ipu_formats,
> + .num_formats = ARRAY_SIZE(jz4760_ipu_formats),
> + .has_bicubic = true,
> + .set_coefs = jz4760_set_coefs,
> +};
> +
> +static const struct of_device_id ingenic_ipu_of_match[] = {
> + { .compatible = "ingenic,jz4725b-ipu", .data = &jz4725b_soc_info },
> + { .compatible = "ingenic,jz4760-ipu", .data = &jz4760_soc_info },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, ingenic_ipu_of_match);
> +
> +static struct platform_driver ingenic_ipu_driver = {
> + .driver = {
> + .name = "ingenic-ipu",
> + .of_match_table = ingenic_ipu_of_match,
> + },
> + .probe = ingenic_ipu_probe,
> + .remove = ingenic_ipu_remove,
> +};
> +
> +struct platform_driver *ingenic_ipu_driver_ptr = &ingenic_ipu_driver;
> diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.h b/drivers/gpu/drm/ingenic/ingenic-ipu.h
> new file mode 100644
> index 000000000000..eab6fab8c7f6
> --- /dev/null
> +++ b/drivers/gpu/drm/ingenic/ingenic-ipu.h
> @@ -0,0 +1,109 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +//
> +// Ingenic JZ47xx IPU - Register definitions and private API
> +//
> +// Copyright (C) 2020, Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> +
> +#ifndef DRIVERS_GPU_DRM_INGENIC_INGENIC_IPU_H
> +#define DRIVERS_GPU_DRM_INGENIC_INGENIC_IPU_H
> +
> +#include <linux/bitops.h>
> +
> +#define JZ_REG_IPU_CTRL 0x00
> +#define JZ_REG_IPU_STATUS 0x04
> +#define JZ_REG_IPU_D_FMT 0x08
> +#define JZ_REG_IPU_Y_ADDR 0x0c
> +#define JZ_REG_IPU_U_ADDR 0x10
> +#define JZ_REG_IPU_V_ADDR 0x14
> +#define JZ_REG_IPU_IN_GS 0x18
> +#define JZ_REG_IPU_Y_STRIDE 0x1c
> +#define JZ_REG_IPU_UV_STRIDE 0x20
> +#define JZ_REG_IPU_OUT_ADDR 0x24
> +#define JZ_REG_IPU_OUT_GS 0x28
> +#define JZ_REG_IPU_OUT_STRIDE 0x2c
> +#define JZ_REG_IPU_RSZ_COEF_INDEX 0x30
> +#define JZ_REG_IPU_CSC_C0_COEF 0x34
> +#define JZ_REG_IPU_CSC_C1_COEF 0x38
> +#define JZ_REG_IPU_CSC_C2_COEF 0x3c
> +#define JZ_REG_IPU_CSC_C3_COEF 0x40
> +#define JZ_REG_IPU_CSC_C4_COEF 0x44
> +#define JZ_REG_IPU_HRSZ_COEF_LUT 0x48
> +#define JZ_REG_IPU_VRSZ_COEF_LUT 0x4c
> +#define JZ_REG_IPU_CSC_OFFSET 0x50
> +#define JZ_REG_IPU_Y_PHY_T_ADDR 0x54
> +#define JZ_REG_IPU_U_PHY_T_ADDR 0x58
> +#define JZ_REG_IPU_V_PHY_T_ADDR 0x5c
> +#define JZ_REG_IPU_OUT_PHY_T_ADDR 0x60
> +
> +#define JZ_IPU_CTRL_ADDR_SEL BIT(20)
> +#define JZ_IPU_CTRL_ZOOM_SEL BIT(18)
> +#define JZ_IPU_CTRL_DFIX_SEL BIT(17)
> +#define JZ_IPU_CTRL_LCDC_SEL BIT(11)
> +#define JZ_IPU_CTRL_SPKG_SEL BIT(10)
> +#define JZ_IPU_CTRL_VSCALE BIT(9)
> +#define JZ_IPU_CTRL_HSCALE BIT(8)
> +#define JZ_IPU_CTRL_STOP BIT(7)
> +#define JZ_IPU_CTRL_RST BIT(6)
> +#define JZ_IPU_CTRL_FM_IRQ_EN BIT(5)
> +#define JZ_IPU_CTRL_CSC_EN BIT(4)
> +#define JZ_IPU_CTRL_VRSZ_EN BIT(3)
> +#define JZ_IPU_CTRL_HRSZ_EN BIT(2)
> +#define JZ_IPU_CTRL_RUN BIT(1)
> +#define JZ_IPU_CTRL_CHIP_EN BIT(0)
> +
> +#define JZ_IPU_STATUS_OUT_END BIT(0)
> +
> +#define JZ_IPU_IN_GS_H_LSB 0x0
> +#define JZ_IPU_IN_GS_W_LSB 0x10
> +#define JZ_IPU_OUT_GS_H_LSB 0x0
> +#define JZ_IPU_OUT_GS_W_LSB 0x10
> +
> +#define JZ_IPU_Y_STRIDE_Y_LSB 0
> +#define JZ_IPU_UV_STRIDE_U_LSB 16
> +#define JZ_IPU_UV_STRIDE_V_LSB 0
> +
> +#define JZ_IPU_D_FMT_IN_FMT_LSB 0
> +#define JZ_IPU_D_FMT_IN_FMT_RGB555 (0x0 << JZ_IPU_D_FMT_IN_FMT_LSB)
> +#define JZ_IPU_D_FMT_IN_FMT_YUV420 (0x0 << JZ_IPU_D_FMT_IN_FMT_LSB)
> +#define JZ_IPU_D_FMT_IN_FMT_YUV422 (0x1 << JZ_IPU_D_FMT_IN_FMT_LSB)
> +#define JZ_IPU_D_FMT_IN_FMT_RGB888 (0x2 << JZ_IPU_D_FMT_IN_FMT_LSB)
> +#define JZ_IPU_D_FMT_IN_FMT_YUV444 (0x2 << JZ_IPU_D_FMT_IN_FMT_LSB)
> +#define JZ_IPU_D_FMT_IN_FMT_RGB565 (0x3 << JZ_IPU_D_FMT_IN_FMT_LSB)
> +
> +#define JZ_IPU_D_FMT_YUV_FMT_LSB 2
> +#define JZ_IPU_D_FMT_YUV_Y1UY0V (0x0 << JZ_IPU_D_FMT_YUV_FMT_LSB)
> +#define JZ_IPU_D_FMT_YUV_Y1VY0U (0x1 << JZ_IPU_D_FMT_YUV_FMT_LSB)
> +#define JZ_IPU_D_FMT_YUV_UY1VY0 (0x2 << JZ_IPU_D_FMT_YUV_FMT_LSB)
> +#define JZ_IPU_D_FMT_YUV_VY1UY0 (0x3 << JZ_IPU_D_FMT_YUV_FMT_LSB)
> +#define JZ_IPU_D_FMT_IN_FMT_YUV411 (0x3 << JZ_IPU_D_FMT_IN_FMT_LSB)
> +
> +#define JZ_IPU_D_FMT_OUT_FMT_LSB 19
> +#define JZ_IPU_D_FMT_OUT_FMT_RGB555 (0x0 << JZ_IPU_D_FMT_OUT_FMT_LSB)
> +#define JZ_IPU_D_FMT_OUT_FMT_RGB565 (0x1 << JZ_IPU_D_FMT_OUT_FMT_LSB)
> +#define JZ_IPU_D_FMT_OUT_FMT_RGB888 (0x2 << JZ_IPU_D_FMT_OUT_FMT_LSB)
> +#define JZ_IPU_D_FMT_OUT_FMT_YUV422 (0x3 << JZ_IPU_D_FMT_OUT_FMT_LSB)
> +#define JZ_IPU_D_FMT_OUT_FMT_RGBAAA (0x4 << JZ_IPU_D_FMT_OUT_FMT_LSB)
> +
> +#define JZ_IPU_D_FMT_RGB_OUT_OFT_LSB 22
> +#define JZ_IPU_D_FMT_RGB_OUT_OFT_RGB (0x0 << JZ_IPU_D_FMT_RGB_OUT_OFT_LSB)
> +#define JZ_IPU_D_FMT_RGB_OUT_OFT_RBG (0x1 << JZ_IPU_D_FMT_RGB_OUT_OFT_LSB)
> +#define JZ_IPU_D_FMT_RGB_OUT_OFT_GBR (0x2 << JZ_IPU_D_FMT_RGB_OUT_OFT_LSB)
> +#define JZ_IPU_D_FMT_RGB_OUT_OFT_GRB (0x3 << JZ_IPU_D_FMT_RGB_OUT_OFT_LSB)
> +#define JZ_IPU_D_FMT_RGB_OUT_OFT_BRG (0x4 << JZ_IPU_D_FMT_RGB_OUT_OFT_LSB)
> +#define JZ_IPU_D_FMT_RGB_OUT_OFT_BGR (0x5 << JZ_IPU_D_FMT_RGB_OUT_OFT_LSB)
> +
> +#define JZ4725B_IPU_RSZ_LUT_COEF_LSB 2
> +#define JZ4725B_IPU_RSZ_LUT_COEF_MASK 0x7ff
> +#define JZ4725B_IPU_RSZ_LUT_IN_EN BIT(1)
> +#define JZ4725B_IPU_RSZ_LUT_OUT_EN BIT(0)
> +
> +#define JZ4760_IPU_RSZ_COEF20_LSB 6
> +#define JZ4760_IPU_RSZ_COEF31_LSB 17
> +#define JZ4760_IPU_RSZ_COEF_MASK 0x7ff
> +#define JZ4760_IPU_RSZ_OFFSET_LSB 1
> +#define JZ4760_IPU_RSZ_OFFSET_MASK 0x1f
> +
> +#define JZ_IPU_CSC_OFFSET_CHROMA_LSB 16
> +#define JZ_IPU_CSC_OFFSET_LUMA_LSB 16
> +
> +#endif /* DRIVERS_GPU_DRM_INGENIC_INGENIC_IPU_H */
> --
> 2.27.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
