Re: [PATCH v1.2 4/4] dt-bindings: display: bridge: renesas, lvds: Convert binding to YAML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sam,

On Mon, Jun 29, 2020 at 10:10:01AM +0200, Sam Ravnborg wrote:
> On Fri, May 15, 2020 at 12:42:11AM +0300, Laurent Pinchart wrote:
> > Convert the Renesas R-Car LVDS encoder text binding to YAML.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > Acked-by: Maxime Ripard <mripard@xxxxxxxxxx>
> > ---
> > Changes since v1:
> > 
> > - Mention RZ/G1 and R2/G2 explicitly
> > - Drop the part numbers in comments, only keep the SoC names
> > - Use one address and size cell in the examples
> 
> Seems this was not picked up so I went ahead and applied to
> drm-misc-next.

I was planning to send a pull request with other DT bindings conversion,
but merging it earlier is better :-) Thank you.

> > ---
> >  .../bindings/display/bridge/renesas,lvds.txt  |  85 ------
> >  .../bindings/display/bridge/renesas,lvds.yaml | 248 ++++++++++++++++++
> >  2 files changed, 248 insertions(+), 85 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> >  create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > deleted file mode 100644
> > index c62ce2494ed9..000000000000
> > --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > +++ /dev/null
> > @@ -1,85 +0,0 @@
> > -Renesas R-Car LVDS Encoder
> > -==========================
> > -
> > -These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
> > -Gen2, R-Car Gen3 and RZ/G SoCs.
> > -
> > -Required properties:
> > -
> > -- compatible : Shall contain one of
> > -  - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
> > -  - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders
> > -  - "renesas,r8a774a1-lvds" for R8A774A1 (RZ/G2M) compatible LVDS encoders
> > -  - "renesas,r8a774b1-lvds" for R8A774B1 (RZ/G2N) compatible LVDS encoders
> > -  - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders
> > -  - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
> > -  - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
> > -  - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
> > -  - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
> > -  - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
> > -  - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders
> > -  - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
> > -  - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders
> > -  - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders
> > -  - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
> > -
> > -- reg: Base address and length for the memory-mapped registers
> > -- clocks: A list of phandles + clock-specifier pairs, one for each entry in
> > -  the clock-names property.
> > -- clock-names: Name of the clocks. This property is model-dependent.
> > -  - The functional clock, which mandatory for all models, shall be listed
> > -    first, and shall be named "fck".
> > -  - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or
> > -    DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be
> > -    named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN
> > -    numerical index.
> > -  - When the clocks property only contains the functional clock, the
> > -    clock-names property may be omitted.
> > -- resets: A phandle + reset specifier for the module reset
> > -
> > -Required nodes:
> > -
> > -The LVDS encoder has two video ports. Their connections are modelled using the
> > -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > -
> > -- Video port 0 corresponds to the parallel RGB input
> > -- Video port 1 corresponds to the LVDS output
> > -
> > -Each port shall have a single endpoint.
> > -
> > -Optional properties:
> > -
> > -- renesas,companion : phandle to the companion LVDS encoder. This property is
> > -  mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to
> > -  the second encoder to be used as a companion in dual-link mode. It shall not
> > -  be set for any other LVDS encoder.
> > -
> > -
> > -Example:
> > -
> > -	lvds0: lvds@feb90000 {
> > -		compatible = "renesas,r8a77990-lvds";
> > -		reg = <0 0xfeb90000 0 0x20>;
> > -		clocks = <&cpg CPG_MOD 727>;
> > -		power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > -		resets = <&cpg 727>;
> > -
> > -		renesas,companion = <&lvds1>;
> > -
> > -		ports {
> > -			#address-cells = <1>;
> > -			#size-cells = <0>;
> > -
> > -			port@0 {
> > -				reg = <0>;
> > -				lvds0_in: endpoint {
> > -					remote-endpoint = <&du_out_lvds0>;
> > -				};
> > -			};
> > -			port@1 {
> > -				reg = <1>;
> > -				lvds0_out: endpoint {
> > -				};
> > -			};
> > -		};
> > -	};
> > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
> > new file mode 100644
> > index 000000000000..98c7330a9485
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
> > @@ -0,0 +1,248 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas R-Car LVDS Encoder
> > +
> > +maintainers:
> > +  - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > +
> > +description: |
> > +  These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
> > +  Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders
> > +      - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders
> > +      - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders
> > +      - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders
> > +      - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders
> > +      - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders
> > +      - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders
> > +      - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
> > +      - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
> > +      - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
> > +      - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
> > +      - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
> > +      - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
> > +      - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders
> > +      - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    minItems: 1
> > +    maxItems: 4
> > +
> > +  clock-names:
> > +    minItems: 1
> > +    maxItems: 4
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  ports:
> > +    type: object
> > +    description: |
> > +      This device has two video ports. Their connections are modelled using the
> > +      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > +      Each port shall have a single endpoint.
> > +
> > +    properties:
> > +      '#address-cells':
> > +        const: 1
> > +
> > +      '#size-cells':
> > +        const: 0
> > +
> > +      port@0:
> > +        type: object
> > +        description: Parallel RGB input port
> > +
> > +      port@1:
> > +        type: object
> > +        description: LVDS output port
> > +
> > +    required:
> > +      - port@0
> > +      - port@1
> > +
> > +    additionalProperties: false
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  renesas,companion:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      phandle to the companion LVDS encoder. This property is mandatory
> > +      for the first LVDS encoder on D3 and E3 SoCs, and shall point to
> > +      the second encoder to be used as a companion in dual-link mode. It
> > +      shall not be set for any other LVDS encoder.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - power-domains
> > +  - resets
> > +  - ports
> > +
> > +if:
> > +  properties:
> > +    compatible:
> > +      enum:
> > +        - renesas,r8a774c0-lvds
> > +        - renesas,r8a77990-lvds
> > +        - renesas,r8a77995-lvds
> > +then:
> > +  properties:
> > +    clocks:
> > +      minItems: 1
> > +      maxItems: 4
> > +      items:
> > +        - description: Functional clock
> > +        - description: EXTAL input clock
> > +        - description: DU_DOTCLKIN0 input clock
> > +        - description: DU_DOTCLKIN1 input clock
> > +
> > +    clock-names:
> > +      minItems: 1
> > +      maxItems: 4
> > +      items:
> > +        - const: fck
> > +        # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
> > +        # These clocks are optional.
> > +        - enum:
> > +          - extal
> > +          - dclkin.0
> > +          - dclkin.1
> > +        - enum:
> > +          - extal
> > +          - dclkin.0
> > +          - dclkin.1
> > +        - enum:
> > +          - extal
> > +          - dclkin.0
> > +          - dclkin.1
> > +
> > +  required:
> > +    - clock-names
> > +
> > +else:
> > +  properties:
> > +    clocks:
> > +      maxItems: 1
> > +      items:
> > +        - description: Functional clock
> > +
> > +    clock-names:
> > +      maxItems: 1
> > +      items:
> > +        - const: fck
> > +
> > +    renesas,companion: false
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/renesas-cpg-mssr.h>
> > +    #include <dt-bindings/power/r8a7795-sysc.h>
> > +
> > +    lvds@feb90000 {
> > +        compatible = "renesas,r8a7795-lvds";
> > +        reg = <0xfeb90000 0x14>;
> > +        clocks = <&cpg CPG_MOD 727>;
> > +        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > +        resets = <&cpg 727>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port@0 {
> > +                reg = <0>;
> > +                lvds_in: endpoint {
> > +                    remote-endpoint = <&du_out_lvds0>;
> > +                };
> > +            };
> > +            port@1 {
> > +                reg = <1>;
> > +                lvds_out: endpoint {
> > +                    remote-endpoint = <&panel_in>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +  - |
> > +    #include <dt-bindings/clock/renesas-cpg-mssr.h>
> > +    #include <dt-bindings/power/r8a77990-sysc.h>
> > +
> > +    lvds0: lvds@feb90000 {
> > +        compatible = "renesas,r8a77990-lvds";
> > +        reg = <0xfeb90000 0x20>;
> > +        clocks = <&cpg CPG_MOD 727>,
> > +                 <&x13_clk>,
> > +                 <&extal_clk>;
> > +        clock-names = "fck", "dclkin.0", "extal";
> > +        power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +        resets = <&cpg 727>;
> > +
> > +        renesas,companion = <&lvds1>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port@0 {
> > +                reg = <0>;
> > +                lvds0_in: endpoint {
> > +                    remote-endpoint = <&du_out_lvds0>;
> > +                };
> > +            };
> > +            port@1 {
> > +                reg = <1>;
> > +                lvds0_out: endpoint {
> > +                    remote-endpoint = <&panel_in1>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +    lvds1: lvds@feb90100 {
> > +        compatible = "renesas,r8a77990-lvds";
> > +        reg = <0xfeb90100 0x20>;
> > +        clocks = <&cpg CPG_MOD 727>,
> > +                 <&x13_clk>,
> > +                 <&extal_clk>;
> > +        clock-names = "fck", "dclkin.0", "extal";
> > +        power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > +        resets = <&cpg 726>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port@0 {
> > +                reg = <0>;
> > +                lvds1_in: endpoint {
> > +                    remote-endpoint = <&du_out_lvds1>;
> > +                };
> > +            };
> > +            port@1 {
> > +                reg = <1>;
> > +                lvds1_out: endpoint {
> > +                    remote-endpoint = <&panel_in2>;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux