tree: git://people.freedesktop.org/~agd5f/linux.git drm-next
head: fadef51a438279ca660dbce31c26e787d6680149
commit: e14661af4e9f48d5e4380bfb5497ee2e640c5508 [198/491] drm/amdkfd: Support Sienna_Cichlid KFD v4
config: x86_64-randconfig-s021-20200623 (attached as .config)
compiler: gcc-9 (Debian 9.3.0-13) 9.3.0
reproduce:
# apt-get install sparse
# sparse version: v0.6.2-dirty
git checkout e14661af4e9f48d5e4380bfb5497ee2e640c5508
# save the attached .config to linux build tree
make W=1 C=1 ARCH=x86_64 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@xxxxxxxxx>
sparse warnings: (new ones prefixed by >>)
>> drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c:268:17: sparse: sparse: cast removes address space '<asn:1>' of expression
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c:270:17: sparse: sparse: cast removes address space '<asn:1>' of expression
vim +268 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c
192
193 static int hqd_load_v10_3(struct kgd_dev *kgd, void *mqd, uint32_t pipe_id,
194 uint32_t queue_id, uint32_t __user *wptr,
195 uint32_t wptr_shift, uint32_t wptr_mask,
196 struct mm_struct *mm)
197 {
198 struct amdgpu_device *adev = get_amdgpu_device(kgd);
199 struct v10_compute_mqd *m;
200 uint32_t *mqd_hqd;
201 uint32_t reg, hqd_base, data;
202
203 m = get_mqd(mqd);
204
205 pr_debug("Load hqd of pipe %d queue %d\n", pipe_id, queue_id);
206 acquire_queue(kgd, pipe_id, queue_id);
207
208 /* HIQ is set during driver init period with vmid set to 0*/
209 if (m->cp_hqd_vmid == 0) {
210 uint32_t value, mec, pipe;
211
212 mec = (pipe_id / adev->gfx.mec.num_pipe_per_mec) + 1;
213 pipe = (pipe_id % adev->gfx.mec.num_pipe_per_mec);
214
215 pr_debug("kfd: set HIQ, mec:%d, pipe:%d, queue:%d.\n",
216 mec, pipe, queue_id);
217 value = RREG32(SOC15_REG_OFFSET(GC, 0, mmRLC_CP_SCHEDULERS));
218 value = REG_SET_FIELD(value, RLC_CP_SCHEDULERS, scheduler1,
219 ((mec << 5) | (pipe << 3) | queue_id | 0x80));
220 WREG32(SOC15_REG_OFFSET(GC, 0, mmRLC_CP_SCHEDULERS), value);
221 }
222
223 /* HQD registers extend from CP_MQD_BASE_ADDR to CP_HQD_EOP_WPTR_MEM. */
224 mqd_hqd = &m->cp_mqd_base_addr_lo;
225 hqd_base = SOC15_REG_OFFSET(GC, 0, mmCP_MQD_BASE_ADDR);
226
227 for (reg = hqd_base;
228 reg <= SOC15_REG_OFFSET(GC, 0, mmCP_HQD_PQ_WPTR_HI); reg++)
229 WREG32(reg, mqd_hqd[reg - hqd_base]);
230
231
232 /* Activate doorbell logic before triggering WPTR poll. */
233 data = REG_SET_FIELD(m->cp_hqd_pq_doorbell_control,
234 CP_HQD_PQ_DOORBELL_CONTROL, DOORBELL_EN, 1);
235 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL), data);
236
237 if (wptr) {
238 /* Don't read wptr with get_user because the user
239 * context may not be accessible (if this function
240 * runs in a work queue). Instead trigger a one-shot
241 * polling read from memory in the CP. This assumes
242 * that wptr is GPU-accessible in the queue's VMID via
243 * ATC or SVM. WPTR==RPTR before starting the poll so
244 * the CP starts fetching new commands from the right
245 * place.
246 *
247 * Guessing a 64-bit WPTR from a 32-bit RPTR is a bit
248 * tricky. Assume that the queue didn't overflow. The
249 * number of valid bits in the 32-bit RPTR depends on
250 * the queue size. The remaining bits are taken from
251 * the saved 64-bit WPTR. If the WPTR wrapped, add the
252 * queue size.
253 */
254 uint32_t queue_size =
255 2 << REG_GET_FIELD(m->cp_hqd_pq_control,
256 CP_HQD_PQ_CONTROL, QUEUE_SIZE);
257 uint64_t guessed_wptr = m->cp_hqd_pq_rptr & (queue_size - 1);
258
259 if ((m->cp_hqd_pq_wptr_lo & (queue_size - 1)) < guessed_wptr)
260 guessed_wptr += queue_size;
261 guessed_wptr += m->cp_hqd_pq_wptr_lo & ~(queue_size - 1);
262 guessed_wptr += (uint64_t)m->cp_hqd_pq_wptr_hi << 32;
263
264 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_HQD_PQ_WPTR_LO),
265 lower_32_bits(guessed_wptr));
266 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_HQD_PQ_WPTR_HI),
267 upper_32_bits(guessed_wptr));
> 268 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_HQD_PQ_WPTR_POLL_ADDR),
269 lower_32_bits((uint64_t)wptr));
270 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_HQD_PQ_WPTR_POLL_ADDR_HI),
271 upper_32_bits((uint64_t)wptr));
272 pr_debug("%s setting CP_PQ_WPTR_POLL_CNTL1 to %x\n", __func__,
273 (uint32_t)get_queue_mask(adev, pipe_id, queue_id));
274 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_PQ_WPTR_POLL_CNTL1),
275 (uint32_t)get_queue_mask(adev, pipe_id, queue_id));
276 }
277
278 /* Start the EOP fetcher */
279 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_HQD_EOP_RPTR),
280 REG_SET_FIELD(m->cp_hqd_eop_rptr,
281 CP_HQD_EOP_RPTR, INIT_FETCHER, 1));
282
283 data = REG_SET_FIELD(m->cp_hqd_active, CP_HQD_ACTIVE, ACTIVE, 1);
284 WREG32(SOC15_REG_OFFSET(GC, 0, mmCP_HQD_ACTIVE), data);
285
286 release_queue(kgd);
287
288 return 0;
289 }
290
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@xxxxxxxxxxxx
Attachment:
.config.gz
Description: application/gzip
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
