Re: [PATCH v8 7/7] drm/panel-simple: Add missing connector type for some panels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sam and Dmitry,

On Sat, Jun 20, 2020 at 01:21:32PM +0200, Sam Ravnborg wrote:
> On Thu, Jun 18, 2020 at 01:27:03AM +0300, Dmitry Osipenko wrote:
> > The DRM panel bridge core requires connector type to be set up properly,
> > otherwise it rejects the panel. The missing connector type problem popped
> > up while I was trying to wrap CLAA070WP03XG panel into a DRM bridge in
> > order to test whether panel's rotation property work properly using
> > panel-simple driver on NVIDIA Tegra30 Nexus 7 tablet device, which uses
> > CLAA070WP03XG display panel.
> > 
> > The NVIDIA Tegra DRM driver recently gained DRM bridges support for the
> > RGB output and now driver wraps directly-connected panels into DRM bridge.
> > Hence all panels should have connector type set properly now, otherwise
> > the panel's wrapping fails.
> > 
> > This patch adds missing connector types for the LVDS panels that are found
> > on NVIDIA Tegra devices:
> > 
> >   1. AUO B101AW03
> >   2. Chunghwa CLAA070WP03XG
> >   3. Chunghwa CLAA101WA01A
> >   4. Chunghwa CLAA101WB01
> >   5. EDT ET057090DHU
> >   6. Innolux N156BGE L21
> >   7. Samsung LTN101NT05
> > 
> > Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> 
> Very good to have this fixed.
> I went ahead and pushed this commit to drm-misc-next as it is really
> independent from the rest of the series.
> 
> > ---
> >  drivers/gpu/drm/panel/panel-simple.c | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index 6764ac630e22..9eb2dbb7bfa6 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -687,6 +687,7 @@ static const struct panel_desc auo_b101aw03 = {
> >  		.width = 223,
> >  		.height = 125,
> >  	},
> > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,

Note that, for LVDS panels, the bus_format field is mandatory. This
panel, for instance, according to
http://www.vslcd.com/Specification/B101AW03%20V.0.pdf, uses
MEDIA_BUS_FMT_RGB666_1X7X3_SPWG (see
https://linuxtv.org/downloads/v4l-dvb-apis/userspace-api/v4l/subdev-formats.html#v4l2-mbus-pixelcode).
The panels below need to be investigated similarly.

> >  };
> >  
> >  static const struct display_timing auo_b101ean01_timing = {
> > @@ -1340,6 +1341,7 @@ static const struct panel_desc chunghwa_claa070wp03xg = {
> >  		.width = 94,
> >  		.height = 150,
> >  	},
> > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,
> >  };
> >  
> >  static const struct drm_display_mode chunghwa_claa101wa01a_mode = {
> > @@ -1362,6 +1364,7 @@ static const struct panel_desc chunghwa_claa101wa01a = {
> >  		.width = 220,
> >  		.height = 120,
> >  	},
> > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,
> >  };
> >  
> >  static const struct drm_display_mode chunghwa_claa101wb01_mode = {
> > @@ -1384,6 +1387,7 @@ static const struct panel_desc chunghwa_claa101wb01 = {
> >  		.width = 223,
> >  		.height = 125,
> >  	},
> > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,
> >  };
> >  
> >  static const struct drm_display_mode dataimage_scf0700c48ggu18_mode = {
> > @@ -1573,6 +1577,7 @@ static const struct panel_desc edt_et057090dhu = {
> >  	},
> >  	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> >  	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,

This contradicts .bus_format and .bus_flags that hint that the panel is
a DPI panel, not an LVDS panel. According to
https://www.lcdtek.co.uk/dwpdf/ET057090DHU-RoHS.pdf, this isn't an LVDS
panel.

I'm worried enough research hasn't gone into this patch, and I'd prefer
reverting it until we check each panel individually.

> >  };
> >  
> >  static const struct drm_display_mode edt_etm0700g0dh6_mode = {
> > @@ -2055,6 +2060,7 @@ static const struct panel_desc innolux_n156bge_l21 = {
> >  		.width = 344,
> >  		.height = 193,
> >  	},
> > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,
> >  };
> >  
> >  static const struct drm_display_mode innolux_p120zdg_bf1_mode = {
> > @@ -3001,6 +3007,7 @@ static const struct panel_desc samsung_ltn101nt05 = {
> >  		.width = 223,
> >  		.height = 125,
> >  	},
> > +	.connector_type = DRM_MODE_CONNECTOR_LVDS,
> >  };
> >  
> >  static const struct drm_display_mode samsung_ltn140at29_301_mode = {

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux