Converts the ast driver to drm_info(), drm_err() and drm_WARN_*(). No
functional changes are made.
v2:
* also convert WARN_*() macros
Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Reviewed-by: Emil Velikov <emil.l.velikov@xxxxxxxxx>
---
drivers/gpu/drm/ast/ast_main.c | 34 +++++++++++++++++-----------------
drivers/gpu/drm/ast/ast_mode.c | 26 +++++++++++++++-----------
drivers/gpu/drm/ast/ast_post.c | 2 +-
drivers/gpu/drm/ast/ast_ttm.c | 2 +-
4 files changed, 34 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
index 3edfc6c92b9a..2eab19a9056f 100644
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -79,7 +79,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
scu_rev)) {
/* We do, disable P2A access */
ast->config_mode = ast_use_dt;
- DRM_INFO("Using device-tree for configuration\n");
+ drm_info(dev, "Using device-tree for configuration\n");
return;
}
@@ -101,7 +101,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
/* P2A works, grab silicon revision */
ast->config_mode = ast_use_p2a;
- DRM_INFO("Using P2A bridge for configuration\n");
+ drm_info(dev, "Using P2A bridge for configuration\n");
/* Read SCU7c (silicon revision register) */
ast_write32(ast, 0xf004, 0x1e6e0000);
@@ -112,7 +112,7 @@ static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev)
}
/* We have a P2A bridge but it's disabled */
- DRM_INFO("P2A bridge disabled, using default configuration\n");
+ drm_info(dev, "P2A bridge disabled, using default configuration\n");
}
static int ast_detect_chip(struct drm_device *dev, bool *need_post)
@@ -128,7 +128,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
*/
if (!ast_is_vga_enabled(dev)) {
ast_enable_vga(dev);
- DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
+ drm_info(dev, "VGA not enabled on entry, requesting chip POST\n");
*need_post = true;
} else
*need_post = false;
@@ -144,36 +144,36 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Identify chipset */
if (dev->pdev->revision >= 0x40) {
ast->chip = AST2500;
- DRM_INFO("AST 2500 detected\n");
+ drm_info(dev, "AST 2500 detected\n");
} else if (dev->pdev->revision >= 0x30) {
ast->chip = AST2400;
- DRM_INFO("AST 2400 detected\n");
+ drm_info(dev, "AST 2400 detected\n");
} else if (dev->pdev->revision >= 0x20) {
ast->chip = AST2300;
- DRM_INFO("AST 2300 detected\n");
+ drm_info(dev, "AST 2300 detected\n");
} else if (dev->pdev->revision >= 0x10) {
switch (scu_rev & 0x0300) {
case 0x0200:
ast->chip = AST1100;
- DRM_INFO("AST 1100 detected\n");
+ drm_info(dev, "AST 1100 detected\n");
break;
case 0x0100:
ast->chip = AST2200;
- DRM_INFO("AST 2200 detected\n");
+ drm_info(dev, "AST 2200 detected\n");
break;
case 0x0000:
ast->chip = AST2150;
- DRM_INFO("AST 2150 detected\n");
+ drm_info(dev, "AST 2150 detected\n");
break;
default:
ast->chip = AST2100;
- DRM_INFO("AST 2100 detected\n");
+ drm_info(dev, "AST 2100 detected\n");
break;
}
ast->vga2_clone = false;
} else {
ast->chip = AST2000;
- DRM_INFO("AST 2000 detected\n");
+ drm_info(dev, "AST 2000 detected\n");
}
/* Check if we support wide screen */
@@ -248,13 +248,13 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Print stuff for diagnostic purposes */
switch(ast->tx_chip_type) {
case AST_TX_SIL164:
- DRM_INFO("Using Sil164 TMDS transmitter\n");
+ drm_info(dev, "Using Sil164 TMDS transmitter\n");
break;
case AST_TX_DP501:
- DRM_INFO("Using DP501 DisplayPort transmitter\n");
+ drm_info(dev, "Using DP501 DisplayPort transmitter\n");
break;
default:
- DRM_INFO("Analog VGA only\n");
+ drm_info(dev, "Analog VGA only\n");
}
return 0;
}
@@ -443,7 +443,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
* and higher).
*/
if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
- DRM_INFO("platform has no IO space, trying MMIO\n");
+ drm_info(dev, "platform has no IO space, trying MMIO\n");
ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
}
@@ -465,7 +465,7 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
if (ret)
goto out_free;
ast->vram_size = ast_get_vram_info(dev);
- DRM_INFO("dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
+ drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d size=%08x\n",
ast->mclk, ast->dram_type,
ast->dram_bus_width, ast->vram_size);
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 650fe7efb638..510ffb497344 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -566,14 +566,15 @@ static void
ast_primary_plane_helper_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
- struct ast_private *ast = to_ast_private(plane->dev);
+ struct drm_device *dev = plane->dev;
+ struct ast_private *ast = to_ast_private(dev);
struct drm_plane_state *state = plane->state;
struct drm_gem_vram_object *gbo;
s64 gpu_addr;
gbo = drm_gem_vram_of_gem(state->fb->obj[0]);
gpu_addr = drm_gem_vram_offset(gbo);
- if (WARN_ON_ONCE(gpu_addr < 0))
+ if (drm_WARN_ON_ONCE(dev, gpu_addr < 0))
return; /* Bug: we didn't pin the BO to VRAM in prepare_fb. */
ast_set_offset_reg(ast, state->fb);
@@ -620,6 +621,7 @@ static int
ast_cursor_plane_helper_prepare_fb(struct drm_plane *plane,
struct drm_plane_state *new_state)
{
+ struct drm_device *dev = plane->dev;
struct drm_framebuffer *fb = new_state->fb;
struct drm_crtc *crtc = new_state->crtc;
struct drm_gem_vram_object *gbo;
@@ -630,11 +632,11 @@ ast_cursor_plane_helper_prepare_fb(struct drm_plane *plane,
if (!crtc || !fb)
return 0;
- if (WARN_ON_ONCE(fb->width > AST_MAX_HWC_WIDTH) ||
- WARN_ON_ONCE(fb->height > AST_MAX_HWC_HEIGHT))
+ if (drm_WARN_ON_ONCE(dev, fb->width > AST_MAX_HWC_WIDTH) ||
+ drm_WARN_ON_ONCE(dev, fb->height > AST_MAX_HWC_HEIGHT))
return -EINVAL; /* BUG: didn't test in atomic_check() */
- ast = to_ast_private(crtc->dev);
+ ast = to_ast_private(dev);
gbo = drm_gem_vram_of_gem(fb->obj[0]);
src = drm_gem_vram_vmap(gbo);
@@ -703,6 +705,7 @@ static void
ast_cursor_plane_helper_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
+ struct drm_device *dev = plane->dev;
struct drm_plane_state *state = plane->state;
struct drm_crtc *crtc = state->crtc;
struct drm_framebuffer *fb = state->fb;
@@ -719,7 +722,7 @@ ast_cursor_plane_helper_atomic_update(struct drm_plane *plane,
/* A new cursor image was installed. */
gbo = ast->cursor.gbo[ast->cursor.next_index];
off = drm_gem_vram_offset(gbo);
- if (WARN_ON_ONCE(off < 0))
+ if (drm_WARN_ON_ONCE(dev, off < 0))
return; /* Bug: we didn't pin cursor HW BO to VRAM. */
ast_cursor_set_base(ast, off);
@@ -898,8 +901,9 @@ static struct drm_crtc_state *
ast_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
{
struct ast_crtc_state *new_ast_state, *ast_state;
+ struct drm_device *dev = crtc->dev;
- if (WARN_ON(!crtc->state))
+ if (drm_WARN_ON(dev, !crtc->state))
return NULL;
new_ast_state = kmalloc(sizeof(*new_ast_state), GFP_KERNEL);
@@ -1105,7 +1109,7 @@ static int ast_connector_init(struct drm_device *dev)
connector = &ast_connector->base;
ast_connector->i2c = ast_i2c_create(dev);
if (!ast_connector->i2c)
- DRM_ERROR("failed to add ddc bus for connector\n");
+ drm_err(dev, "failed to add ddc bus for connector\n");
drm_connector_init_with_ddc(dev, connector,
&ast_connector_funcs,
@@ -1189,7 +1193,7 @@ int ast_mode_init(struct drm_device *dev)
ARRAY_SIZE(ast_primary_plane_formats),
NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
- DRM_ERROR("ast: drm_universal_plane_init() failed: %d\n", ret);
+ drm_err(dev, "ast: drm_universal_plane_init() failed: %d\n", ret);
return ret;
}
drm_plane_helper_add(&ast->primary_plane,
@@ -1201,7 +1205,7 @@ int ast_mode_init(struct drm_device *dev)
ARRAY_SIZE(ast_cursor_plane_formats),
NULL, DRM_PLANE_TYPE_CURSOR, NULL);
if (ret) {
- DRM_ERROR("drm_universal_plane_failed(): %d\n", ret);
+ drm_err(dev, "drm_universal_plane_failed(): %d\n", ret);
return ret;
}
drm_plane_helper_add(&ast->cursor_plane,
@@ -1323,7 +1327,7 @@ static struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev)
i2c->bit.getscl = get_clock;
ret = i2c_bit_add_bus(&i2c->adapter);
if (ret) {
- DRM_ERROR("Failed to register bit i2c\n");
+ drm_err(dev, "Failed to register bit i2c\n");
goto out_free;
}
diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c
index 226e1290227a..c043fe717553 100644
--- a/drivers/gpu/drm/ast/ast_post.c
+++ b/drivers/gpu/drm/ast/ast_post.c
@@ -2067,7 +2067,7 @@ void ast_post_chip_2500(struct drm_device *dev)
}
if (!ast_dram_init_2500(ast))
- DRM_ERROR("DRAM init failed !\n");
+ drm_err(dev, "DRAM init failed !\n");
temp = ast_mindwm(ast, 0x1e6e2040);
ast_moutdwm(ast, 0x1e6e2040, temp | 0x40);
diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c
index fad34106083a..9c3788a4c1c5 100644
--- a/drivers/gpu/drm/ast/ast_ttm.c
+++ b/drivers/gpu/drm/ast/ast_ttm.c
@@ -44,7 +44,7 @@ int ast_mm_init(struct ast_private *ast)
ast->vram_size);
if (IS_ERR(vmm)) {
ret = PTR_ERR(vmm);
- DRM_ERROR("Error initializing VRAM MM; %d\n", ret);
+ drm_err(dev, "Error initializing VRAM MM; %d\n", ret);
return ret;
}
--
2.27.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
