https://bugzilla.kernel.org/show_bug.cgi?id=208115 Bug ID: 208115 Summary: amdgpu (likely) - power management and display connection problems with an RX590 card Product: Drivers Version: 2.5 Kernel Version: 5.x.x Hardware: x86-64 OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Video(DRI - non Intel) Assignee: drivers_video-dri@xxxxxxxxxxxxxxxxxxxx Reporter: h_mailinglists@xxxxxxxxx Regression: No Created attachment 289583 --> https://bugzilla.kernel.org/attachment.cgi?id=289583&action=edit excerpt from dmesg grepping amdgpu Bug report - power management and display connection problems with an RX590 card Hello developer team Please bear with me, it is my first bug report on the actual kernel. It _might_ partially be related to https://bugzilla.kernel.org/show_bug.cgi?id=201139 background / generic info: I have an AMD RX 590, which is giving me some severe troubles. I have a multitude of ATI/AMD cards/APUs in use for years, mostly Gentoo Linux, a few Deb. derivatives and W32. RX 590 (PCIe) RX 560 (PCIe) HD 5770 (PCIe) HD 5670 (PCIe) HD 5450 and the likes (PCI, PCIe) HD 3870 (PCIe) Kabini (Athlon 5350) (AM1) Kabini E-2100 (soldered/BGA) E-350 (soldered/BGA) Geode LX ;-) (soldered/BGA / companion chip) and more the very chip/card in question: Sapphire Nitro+ Radeon RX 590 8G 50th Anniversary, 8192 MB GDDR5 (the golden one) the following setup it is currently dysfunctional: RX 590 Zen+ 2700 MSI PC-Mate B-350 (latest FW) 16 GiB RAM PSU BeQuiet DarkPowerPro 550 (should be strong enough, and problems are on the low power state side) Monitor: Eizo EV2436W hooked up via DP The setup works _nicely_ with a different GPU (e.g. HD 5450, okay, that's not amdgpu driver, but anyway). My other actual amdgpu card, the RX 560 (Polaris 11) works like a charm in an FX 6300 setup. The very (Eizo) screen also works flawless on my Kabini (though there I have to use a HDMI-2-DVI adapter connection); also an old Geode LX runs fairly well via VGA. software (Gentoo) Linux (5.x.x kernel; tried various versions over time, dind't really get much better), libdrm 2.4.9x / 2.4.10x, mesa 19.3.2 or later, xf86-video-amdgpu 19.1.0 I built a box based on a Ryzen Zen+ 2700, MSI PC-Mate B-350 mainboard. While I was setting it up I ran my elderly HD 5670 in it and everything was fine. All other cards in that ZEN+ system I tried so far worked like a charm. Severe video transcoding (CPU based), just "desktopping around", severe compiling (<-Gentoo): No problem! Power management? No problem! With the RX 590 it's a sheer pain. problems: * GPU not coming back once monitor goes into powersaving * link lost on every second power save (screen blanking / suspend / off / BACO) relation to #201139 ? * reading EDID problems message I found once in dmesg could be a hint (but it seems all others (cards or different boxes) can obtain the EDID) * Sometimes it seems I can still send commands via keyboard / work blindly and thus I might try to start a xrandr script to switch on/off ("reset") the digital outputs? * occasionally switching to VT (and back) helps, sometimes not, and the hardware is frozen; even REISUB (!) won't work. * once I also got it back - but - in max. 800 x 600 resolution * sometimes I can re-gain a signal by replugging the cable switching monitor on/off * freezes (which seem power management related) e.g. running a standard compile job host system had little to do, compilation was running inside a chroot env. (amd64 on amd64) next morning: LEDs on mainboard/GPU still glowing, fans spinning, system entirely frozen, not even REISUB would help nothing in the logs from /var/log/emerge.log it must have stopped somewhere in the middle of a harmless compile (iirc. it was sys-fs/fuse or something), and I don't use strange CFLAGs which might throw illegeal opcodes or something * power consumption is too high during idle * strange power readings in "sensors" at least 33 W (should be 10 W on idling and 3 W in BACO / zero core) * hint: also the W32 / W64 blob showed quite high consumption during desktop idle (AMD blob / GPU-Z) * wall measured might be slightly better but whole system (Zen+, GPU, 2 SSDs and one HDD, hardly any USB periphery no other cards in slots one BD/DVD/CDROM) never drops below 55 W, it's rather higher Is there something I might have missed? Should I try to obtain more verbose logs? Is there any "x-trace" tool that I could run? Radeontop information outputs? I'll attach one of the few logs I could obtain which might contains some hints towards what is happening. on my to-do list: * try a different monitor (though that very EIZO monitor worked like a charm with everything else I threw at it) * try HDMI instead of DP, but I think I don't have HDMI monitors at hand * try the RX590 in a different box (e.g. my FX 6300 unit, which currently runs flawless with an RX 560) - and see if it still misbehaves... Sorry for the wall of text. keywords: link lost, power management problems, powerplay, device reset reinitialization, system freeze, x86-64 amd64, amdgpu, AMD RX 590 RX590 Polaris -- You are receiving this mail because: You are watching the assignee of the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
