This adds support for the Synopsis DesignWare MIPI DSI v1.01 host
controller which is embedded in i.MX 6 SoCs.
Based on following patches, but updated/extended to work with existing
support found in the kernel:
- drm: imx: Support Synopsys DesignWare MIPI DSI host controller
Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Reviewed-by: Emil Velikov <emil.velikov@xxxxxxxxxxxxx>
Tested-by: Adrian Pop <pop.adrian61@xxxxxxxxx>
Tested-by: Arnaud Ferraris <arnaud.ferraris@xxxxxxxxxxxxx>
Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxx>
Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx>
---
Changes since v8:
- Changed Enric's email in the CC tag to his work address
- pllref_clk != 27Mhz promoted from WARN to DRM_DEV_ERROR and
is tested ASAP after clk enable in probe() (Enric)
- Multiple small bridge init cleanups (Enric)
- Multiple debug/error msg fixes to make them more clear or
avoid redundancy (Enric)
- Simplified imx_mipi_dsi_bind() as a result of the DW bridge
bind() removal (Laurent)
- Added a bridge .attach callback
- Dropped unnecessary bridge_to_imxdsi() conversion
- Fixed minor whitespace checkpatch warnings and moved the
bindings doc before this patch to appease checkpatch
Changes since v7:
- Removed encoder helper ops and added drm_bridge (Laurent)
- Brought back drm_simple_encoder_init and dropped dependency on
external unify encoder creation patch (Laurent)
- Minor typo fixes
Changes since v6:
- Replaced custom noop encoder with the simple drm encoder (Enric)
- Added CONFIG_DRM_IMX6_MIPI_DSI depends on CONFIG_OF (Enric)
- Dropped imx_mipi_dsi_register() because now it only creates the
dummy encoder which can easily be done directly in imx_dsi_bind()
Changes since v5:
- Reword to remove unrelated device tree patch mention (Fabio)
- Move pllref_clk enable/disable to bind/unbind (Ezequiel)
- Fix freescale.com -> nxp.com email addresses (Fabio)
- Also added myself as module author (Fabio)
- Use DRM_DEV_* macros for consistency, print more error msg
Changes since v4:
- Split off driver-specific configuration of phy timings due
to new upstream API.
- Move regmap infrastructure logic to separate commit (Ezequiel)
- Move dsi v1.01 layout addition to a separate commit (Ezequiel)
- Minor warnings and driver name fixes
Changes since v3:
- Renamed platform driver to reflect it's i.MX6 only. (Fabio)
Changes since v2:
- Fixed commit tags. (Emil)
Changes since v1:
- Moved register definitions & regmap initialization into bridge
module. Platform drivers get the regmap via plat_data after
calling the bridge probe. (Emil)
---
drivers/gpu/drm/imx/Kconfig | 8 +
drivers/gpu/drm/imx/Makefile | 1 +
drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 399 +++++++++++++++++++++++++
3 files changed, 408 insertions(+)
create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
diff --git a/drivers/gpu/drm/imx/Kconfig b/drivers/gpu/drm/imx/Kconfig
index 874cc532eabad..5f5b925ed09ca 100644
--- a/drivers/gpu/drm/imx/Kconfig
+++ b/drivers/gpu/drm/imx/Kconfig
@@ -46,3 +46,11 @@ config DRM_IMX_HDMI
depends on DRM_IMX
help
Choose this if you want to use HDMI on i.MX6.
+
+config DRM_IMX6_MIPI_DSI
+ tristate "Freescale i.MX6 DRM MIPI DSI"
+ select DRM_DW_MIPI_DSI
+ depends on DRM_IMX
+ depends on OF
+ help
+ Choose this if you want to use MIPI DSI on i.MX6.
diff --git a/drivers/gpu/drm/imx/Makefile b/drivers/gpu/drm/imx/Makefile
index 94fc8e2d92344..205d7e65aa170 100644
--- a/drivers/gpu/drm/imx/Makefile
+++ b/drivers/gpu/drm/imx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
obj-$(CONFIG_DRM_IMX_DCIC) += imx-dcic.o
obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o
+obj-$(CONFIG_DRM_IMX6_MIPI_DSI) += dw_mipi_dsi-imx6.o
diff --git a/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
new file mode 100644
index 0000000000000..f19b355c6c06d
--- /dev/null
+++ b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * i.MX6 drm driver - MIPI DSI Host Controller
+ *
+ * Copyright (C) 2011-2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2019-2020 Collabora, Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "imx-drm.h"
+
+#define DSI_PWR_UP 0x04
+#define RESET 0
+#define POWERUP BIT(0)
+
+#define DSI_PHY_IF_CTRL 0x5c
+#define PHY_IF_CTRL_RESET 0x0
+
+#define DSI_PHY_TST_CTRL0 0x64
+#define PHY_TESTCLK BIT(1)
+#define PHY_UNTESTCLK 0
+#define PHY_TESTCLR BIT(0)
+#define PHY_UNTESTCLR 0
+
+#define DSI_PHY_TST_CTRL1 0x68
+#define PHY_TESTEN BIT(16)
+#define PHY_UNTESTEN 0
+#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
+#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
+
+struct imx_mipi_dsi {
+ struct drm_encoder encoder;
+ struct drm_bridge bridge;
+ struct device *dev;
+ struct regmap *mux_sel;
+ struct dw_mipi_dsi *mipi_dsi;
+ struct clk *pllref_clk;
+
+ void __iomem *base;
+ unsigned int lane_mbps;
+};
+
+struct dphy_pll_testdin_map {
+ unsigned int max_mbps;
+ u8 testdin;
+};
+
+/* The table is based on 27MHz DPHY pll reference clock. */
+static const struct dphy_pll_testdin_map dptdin_map[] = {
+ {160, 0x04}, {180, 0x24}, {200, 0x44}, {210, 0x06},
+ {240, 0x26}, {250, 0x46}, {270, 0x08}, {300, 0x28},
+ {330, 0x48}, {360, 0x2a}, {400, 0x4a}, {450, 0x0c},
+ {500, 0x2c}, {550, 0x0e}, {600, 0x2e}, {650, 0x10},
+ {700, 0x30}, {750, 0x12}, {800, 0x32}, {850, 0x14},
+ {900, 0x34}, {950, 0x54}, {1000, 0x74}
+};
+
+static int
+imx_mipi_dsi_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
+
+ /* The following values are taken from dw_hdmi_imx_atomic_check */
+ imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ imx_crtc_state->di_hsync_pin = 2;
+ imx_crtc_state->di_vsync_pin = 3;
+
+ return 0;
+}
+
+static void imx_mipi_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_st)
+{
+ struct imx_mipi_dsi *dsi = bridge->driver_private;
+ int mux = drm_of_encoder_active_port_id(dsi->dev->of_node,
+ &dsi->encoder);
+ /* Set IOMUX DSI output reg to correct IPU 1 or 0 and DI 1 or 0 ports */
+ regmap_update_bits(dsi->mux_sel, IOMUXC_GPR3,
+ IMX6Q_GPR3_MIPI_MUX_CTL_MASK,
+ mux << IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT);
+}
+
+static int imx_mipi_dsi_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct imx_mipi_dsi *dsi = bridge->driver_private;
+ struct drm_bridge *dw_bridge = of_drm_find_bridge(dsi->dev->of_node);
+
+ return drm_bridge_attach(bridge->encoder, dw_bridge,
+ &dsi->bridge, flags);
+}
+
+static const struct drm_bridge_funcs imx_dsi_bridge_funcs = {
+ .atomic_enable = imx_mipi_dsi_bridge_atomic_enable,
+ .atomic_check = imx_mipi_dsi_bridge_atomic_check,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .attach = imx_mipi_dsi_bridge_attach,
+};
+
+static enum drm_mode_status imx_mipi_dsi_mode_valid(void *priv_data,
+ const struct drm_display_mode *mode)
+{
+ /*
+ * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
+ * register is 11-bit.
+ */
+ if (mode->hdisplay > 0x7ff)
+ return MODE_BAD_HVALUE;
+
+ /*
+ * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
+ * register is 11-bit.
+ */
+ if (mode->vdisplay > 0x7ff)
+ return MODE_BAD_VVALUE;
+
+ return MODE_OK;
+}
+
+
+static unsigned int max_mbps_to_testdin(unsigned int max_mbps)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
+ if (dptdin_map[i].max_mbps == max_mbps)
+ return dptdin_map[i].testdin;
+
+ return -EINVAL;
+}
+
+static inline void dsi_write(struct imx_mipi_dsi *dsi, u32 reg, u32 val)
+{
+ writel(val, dsi->base + reg);
+}
+
+static int imx_mipi_dsi_phy_init(void *priv_data)
+{
+ struct imx_mipi_dsi *dsi = priv_data;
+ int testdin;
+
+ testdin = max_mbps_to_testdin(dsi->lane_mbps);
+ if (testdin < 0) {
+ DRM_DEV_ERROR(dsi->dev,
+ "failed to get testdin for %dmbps lane clock\n",
+ dsi->lane_mbps);
+ return testdin;
+ }
+
+ dsi_write(dsi, DSI_PHY_IF_CTRL, PHY_IF_CTRL_RESET);
+ dsi_write(dsi, DSI_PWR_UP, POWERUP);
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(0x44));
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(testdin));
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+ return 0;
+}
+
+static int imx_mipi_dsi_get_lane_mbps(void *priv_data,
+ const struct drm_display_mode *mode,
+ unsigned long mode_flags, u32 lanes,
+ u32 format, unsigned int *lane_mbps)
+{
+ struct imx_mipi_dsi *dsi = priv_data;
+ unsigned int i, target_mbps, mpclk;
+ int bpp;
+
+ bpp = mipi_dsi_pixel_format_to_bpp(format);
+ if (bpp < 0) {
+ DRM_DEV_ERROR(dsi->dev, "Failed to get bpp for format %d: %d\n",
+ format, bpp);
+ return bpp;
+ }
+
+ mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
+ if (mpclk) {
+ /* take 1/0.7 blanking overhead into consideration */
+ target_mbps = (mpclk * (bpp / lanes) * 10) / 7;
+ } else {
+ DRM_DEV_DEBUG(dsi->dev, "Using default 1Gbps DPHY pll clock\n");
+ target_mbps = 1000;
+ }
+
+ DRM_DEV_DEBUG(dsi->dev, "Target lane mbps is %u Mbps\n", target_mbps);
+
+ for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
+ if (target_mbps < dptdin_map[i].max_mbps) {
+ *lane_mbps = dptdin_map[i].max_mbps;
+ dsi->lane_mbps = *lane_mbps;
+ DRM_DEV_DEBUG(dsi->dev, "Real lane mbps is %u Mbps\n",
+ *lane_mbps);
+ return 0;
+ }
+ }
+
+ DRM_DEV_ERROR(dsi->dev, "Out of range DPHY clk frequency for %uMbps\n",
+ target_mbps);
+
+ return -EINVAL;
+}
+
+static int
+dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
+ struct dw_mipi_dsi_dphy_timing *timing)
+{
+ timing->clk_hs2lp = 0x40;
+ timing->clk_lp2hs = 0x40;
+ timing->data_hs2lp = 0x40;
+ timing->data_lp2hs = 0x40;
+
+ return 0;
+}
+
+static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_imx6_phy_ops = {
+ .init = imx_mipi_dsi_phy_init,
+ .get_lane_mbps = imx_mipi_dsi_get_lane_mbps,
+ .get_timing = dw_mipi_dsi_phy_get_timing,
+};
+
+static struct dw_mipi_dsi_plat_data imx6_mipi_dsi_drv_data = {
+ .max_data_lanes = 2,
+ .mode_valid = imx_mipi_dsi_mode_valid,
+ .phy_ops = &dw_mipi_dsi_imx6_phy_ops,
+};
+
+static const struct of_device_id imx_dsi_dt_ids[] = {
+ {
+ .compatible = "fsl,imx6-mipi-dsi",
+ .data = &imx6_mipi_dsi_drv_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_dsi_dt_ids);
+
+static int imx_mipi_dsi_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct imx_mipi_dsi *dsi = dev_get_drvdata(dev);
+ struct drm_device *drm = data;
+ int ret;
+
+ ret = imx_drm_encoder_parse_of(drm, &dsi->encoder, dsi->dev->of_node);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "Failed to parse encoder of node\n");
+ return ret;
+ }
+
+ ret = drm_simple_encoder_init(drm, &dsi->encoder,
+ DRM_MODE_ENCODER_NONE);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "Failed to create drm encoder\n");
+ return ret;
+ }
+
+ ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "Failed to attach IMX6 bridge\n");
+ drm_encoder_cleanup(&dsi->encoder);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void imx_mipi_dsi_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct imx_mipi_dsi *dsi = dev_get_drvdata(dev);
+
+ drm_encoder_cleanup(&dsi->encoder);
+}
+
+static const struct component_ops imx_mipi_dsi_ops = {
+ .bind = imx_mipi_dsi_bind,
+ .unbind = imx_mipi_dsi_unbind,
+};
+
+static int imx_mipi_dsi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id = of_match_device(imx_dsi_dt_ids, dev);
+ struct dw_mipi_dsi_plat_data *pdata = (struct dw_mipi_dsi_plat_data *) of_id->data;
+ struct imx_mipi_dsi *dsi;
+ struct resource *res;
+ unsigned long pllref_rate;
+ int ret;
+
+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+ if (!dsi)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dsi->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(dsi->base))
+ return PTR_ERR(dsi->base);
+
+ dsi->pllref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(dsi->pllref_clk))
+ return PTR_ERR(dsi->pllref_clk);
+
+ ret = clk_prepare_enable(dsi->pllref_clk);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret);
+ return ret;
+ }
+
+ pllref_rate = clk_get_rate(dsi->pllref_clk);
+ if (pllref_rate != 27000000) {
+ DRM_DEV_ERROR(dev, "Only 27Mhz pllref_clk is currently supported\n");
+ ret = -EINVAL;
+ goto err_clkdisable;
+ }
+
+ dsi->mux_sel = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,gpr");
+ if (IS_ERR(dsi->mux_sel)) {
+ ret = PTR_ERR(dsi->mux_sel);
+ DRM_DEV_ERROR(dev, "Failed to get GPR regmap: %d\n", ret);
+ goto err_clkdisable;
+ }
+
+ dsi->dev = dev;
+ dev_set_drvdata(dev, dsi);
+
+ imx6_mipi_dsi_drv_data.base = dsi->base;
+ imx6_mipi_dsi_drv_data.priv_data = dsi;
+
+ dsi->mipi_dsi = dw_mipi_dsi_probe(pdev, pdata);
+ if (IS_ERR(dsi->mipi_dsi)) {
+ ret = PTR_ERR(dsi->mipi_dsi);
+ DRM_DEV_ERROR(dev, "Failed to probe DW DSI host: %d\n", ret);
+ goto err_clkdisable;
+ }
+
+ dsi->bridge.driver_private = dsi;
+ dsi->bridge.funcs = &imx_dsi_bridge_funcs;
+ dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
+ dsi->bridge.encoder = &dsi->encoder;
+
+ drm_bridge_add(&dsi->bridge);
+
+ return component_add(&pdev->dev, &imx_mipi_dsi_ops);
+
+err_clkdisable:
+ clk_disable_unprepare(dsi->pllref_clk);
+ return ret;
+}
+
+static int imx_mipi_dsi_remove(struct platform_device *pdev)
+{
+ struct imx_mipi_dsi *dsi = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(dsi->pllref_clk);
+ drm_bridge_remove(&dsi->bridge);
+ component_del(&pdev->dev, &imx_mipi_dsi_ops);
+
+ return 0;
+}
+
+static struct platform_driver imx_mipi_dsi_driver = {
+ .probe = imx_mipi_dsi_probe,
+ .remove = imx_mipi_dsi_remove,
+ .driver = {
+ .of_match_table = imx_dsi_dt_ids,
+ .name = "dw-mipi-dsi-imx6",
+ },
+};
+module_platform_driver(imx_mipi_dsi_driver);
+
+MODULE_DESCRIPTION("i.MX6 MIPI DSI host controller driver");
+MODULE_AUTHOR("Liu Ying <victor.liu@xxxxxxx>");
+MODULE_AUTHOR("Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
2.27.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
