Re: Linux 3.2: After resume screen only turned on after switching terminals

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Freitag, den 06.07.2012, 17:39 +0200 schrieb Paul Menzel:
> Am Freitag, den 06.07.2012, 17:34 +0200 schrieb Paul Menzel:
> > Am Donnerstag, den 05.07.2012, 08:58 -0400 schrieb Alex Deucher:
> > > On Wed, Jul 4, 2012 at 10:11 AM, Paul Menzel wrote:
> > > > Am Mittwoch, den 04.07.2012, 09:55 -0400 schrieb Alex Deucher:
> > > >> On Wed, Jul 4, 2012 at 9:41 AM, Paul Menzel wrote:
> > > >> > Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
> > > >> >> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
> > > >> >> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
> > > >> >> > >
> > > >> >> > > resuming from suspend to RAM the monitor was indicating by a blinking
> > > >> >> > > LED that it did not receive any signal. This is the first time this
> > > >> >> > > happened. Resuming from suspend to RAM had worked without problems
> > > >> >> > > before (and probably will work again the next tries).
> > > >> >> > >
> > > >> >> > > Logging in from SSH worked fine though. Switching terminal to tty1
> > > >> >> > > nothing changed but going back to tty7, where X was supposed to run),
> > > >> >> > > and the monitor detected a signal and showed the screensaver.
> > > >> >> > >
> > > >> >> > > Switching to tty1 still does not work though, that means the monitor
> > > >> >> > > indicates that it gets no signal.
> > > >> >> >
> > > >> >> > What about tty2-6 or any others?
> > > >> >>
> > > >> >> It just happened again. tty2–6 also do not show anything.
> > > >> >>
> > > >> >> > What does fbset -i say when the problem occurs?
> > > >> >>
> > > >> >> I logged in over SSH not having switched the ttys yet. This is the
> > > >> >> result.
> > > >> >>
> > > >> >>         $ fbset -i
> > > >> >>
> > > >> >>         mode "1280x1024"
> > > >> >>             geometry 1280 1024 1280 1024 32
> > > >> >>             timings 0 0 0 0 0 0 0
> > > >> >>             accel true
> > > >> >>             rgba 8/16,8/8,8/0,0/0
> > > >> >>         endmode
> > > >> >>
> > > >> >>         Frame buffer device information:
> > > >> >>             Name        : radeondrmfb
> > > >> >>             Address     : 0xd0142000
> > > >> >>             Size        : 5242880
> > > >> >>             Type        : PACKED PIXELS
> > > >> >>             Visual      : TRUECOLOR
> > > >> >>             XPanStep    : 1
> > > >> >>             YPanStep    : 1
> > > >> >>             YWrapStep   : 0
> > > >> >>             LineLength  : 5120
> > > >> >>             Accelerator : No
> > > >> >>
> > > >> >> This does not differ though after having switched between ttys and
> > > >> >> getting a working X server again. The other ttys do not just show black.
> > > >> >> When switching from tty7 with the X server running to a console(?) tty
> > > >> >> then I shortly (half second) see some kind of test image, which contains
> > > >> >> four horizontal colored stripes red, green, blue and white(?).
> > > >> >>
> > > >> >> I could not find anything in the output of `dmesg`, but
> > > >> >> `/var/log/syslog` contains several of the following lines.
> > > >> >>
> > > >> >>         Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
> > > >> >>         Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
> > > >> >>         Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
> > > >> >
> > > >> > Does someone have an idea what the problem might be and how to fix it?
> > > >>
> > > >> Is this a regression?  If so can you bisect?
> > > >
> > > > I do not think so. But the problem is I just got that board, have only
> > > > used it with Linux 3.2.x (from Debian Sid/unstable) and this issue is
> > > > not reproducible, that means, it happens in less then 5(?) percent of
> > > > the suspend and resume cycles.
> > > >
> > > > Any idea what these acpid messages could mean?
> > 
> > It just happened again. This time with the monitor not getting any
> > signal. Switching to other virtual terminals does not work.
> > 
> > What debug levels should I increase?
> 
> I attach the output of `dmesg`.

Yesterday it finally happened again. After resume the monitor stayed
black. Only switching virtual consoles with Ctrl + Alt + F6 and back
fixed this. This is the time for the resume.

        [ 8688.180746] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] disconnected
        [ 9069.400626] PM: Syncing filesystems ... done.

Please find the output of `dmesg` and `drm.debug=0x06` attached.


Thanks,

Paul
[ 8673.624413] calling  usb3+ @ 21003, parent: 0000:00:12.0
[ 8673.624417] initcall usb3_i+ returned 0 after 1 usecs
[ 8673.624421] calling  usb2+ @ 21003, parent: 0000:00:13.2
[ 8673.624426] initcall usb2_i+ returned 0 after 1 usecs
[ 8673.624430] calling  usb1+ @ 21003, parent: 0000:00:12.2
[ 8673.624435] initcall usb1_i+ returned 0 after 1 usecs
[ 8673.624442] calling  serio1+ @ 21003, parent: i8042
[ 8673.624447] initcall serio1_i+ returned 0 after 1 usecs
[ 8673.624450] calling  serio0+ @ 21003, parent: i8042
[ 8673.624454] initcall serio0_i+ returned 0 after 1 usecs
[ 8673.624457] calling  i8042+ @ 21003, parent: platform
[ 8673.624462] initcall i8042_i+ returned 0 after 1 usecs
[ 8673.624467] calling  serial8250+ @ 21003, parent: platform
[ 8673.624473] initcall serial8250_i+ returned 0 after 1 usecs
[ 8673.624479] calling  alarmtimer+ @ 21003, parent: platform
[ 8673.624484] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 8673.624487] calling  pcspkr+ @ 21003, parent: platform
[ 8673.624492] initcall pcspkr_i+ returned 0 after 1 usecs
[ 8673.624528] calling  0000:04:00.0+ @ 21003, parent: 0000:00:0a.0
[ 8673.624573] r8169 0000:04:00.0: PME# enabled
[ 8673.624588] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 8673.640108] initcall 0000:04:00.0_i+ returned 0 after 15210 usecs
[ 8673.640111] calling  0000:01:05.0+ @ 21003, parent: 0000:00:01.0
[ 8673.640116] initcall 0000:01:05.0_i+ returned 0 after 1 usecs
[ 8673.640119] calling  0000:00:18.3+ @ 21003, parent: pci0000:00
[ 8673.640128] initcall 0000:00:18.3_i+ returned 0 after 5 usecs
[ 8673.640131] calling  0000:00:18.2+ @ 21003, parent: pci0000:00
[ 8673.640139] initcall 0000:00:18.2_i+ returned 0 after 4 usecs
[ 8673.640142] calling  0000:00:18.1+ @ 21003, parent: pci0000:00
[ 8673.640150] initcall 0000:00:18.1_i+ returned 0 after 4 usecs
[ 8673.640152] calling  0000:00:18.0+ @ 21003, parent: pci0000:00
[ 8673.640162] initcall 0000:00:18.0_i+ returned 0 after 5 usecs
[ 8673.640164] calling  0000:00:14.5+ @ 21003, parent: pci0000:00
[ 8673.640193] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 8673.640197] initcall 0000:00:14.5_i+ returned 0 after 28 usecs
[ 8673.640200] calling  0000:00:14.4+ @ 21003, parent: pci0000:00
[ 8673.640226] initcall 0000:00:14.4_i+ returned 0 after 21 usecs
[ 8673.640229] calling  0000:00:14.3+ @ 21003, parent: pci0000:00
[ 8673.640255] initcall 0000:00:14.3_i+ returned 0 after 22 usecs
[ 8673.640257] calling  0000:00:14.2+ @ 21003, parent: pci0000:00
[ 8673.640263] initcall 0000:00:14.2_i+ returned 0 after 1 usecs
[ 8673.640265] calling  0000:00:14.1+ @ 21003, parent: pci0000:00
[ 8673.640271] initcall 0000:00:14.1_i+ returned 0 after 1 usecs
[ 8673.640273] calling  0000:00:14.0+ @ 21003, parent: pci0000:00
[ 8673.640302] initcall 0000:00:14.0_i+ returned 0 after 25 usecs
[ 8673.640305] calling  0000:00:13.2+ @ 21003, parent: pci0000:00
[ 8673.640339] ehci_hcd 0000:00:13.2: PME# enabled
[ 8673.640343] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 8673.656031] initcall 0000:00:13.2_i+ returned 0 after 15353 usecs
[ 8673.656033] calling  0000:00:13.1+ @ 21003, parent: pci0000:00
[ 8673.656061] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 8673.656065] initcall 0000:00:13.1_i+ returned 0 after 27 usecs
[ 8673.656068] calling  0000:00:13.0+ @ 21003, parent: pci0000:00
[ 8673.656095] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 8673.656099] initcall 0000:00:13.0_i+ returned 0 after 27 usecs
[ 8673.656101] calling  0000:00:12.2+ @ 21003, parent: pci0000:00
[ 8673.656135] ehci_hcd 0000:00:12.2: PME# enabled
[ 8673.656139] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 8673.672026] initcall 0000:00:12.2_i+ returned 0 after 15547 usecs
[ 8673.672029] calling  0000:00:12.1+ @ 21003, parent: pci0000:00
[ 8673.672057] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 8673.672061] initcall 0000:00:12.1_i+ returned 0 after 27 usecs
[ 8673.672064] calling  0000:00:12.0+ @ 21003, parent: pci0000:00
[ 8673.672091] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 8673.672096] initcall 0000:00:12.0_i+ returned 0 after 27 usecs
[ 8673.672098] calling  0000:00:11.0+ @ 21003, parent: pci0000:00
[ 8673.672104] initcall 0000:00:11.0_i+ returned 0 after 1 usecs
[ 8673.672106] calling  0000:00:0a.0+ @ 21003, parent: pci0000:00
[ 8673.672132] initcall 0000:00:0a.0_i+ returned 0 after 21 usecs
[ 8673.672135] calling  0000:00:09.0+ @ 21003, parent: pci0000:00
[ 8673.672160] initcall 0000:00:09.0_i+ returned 0 after 21 usecs
[ 8673.672162] calling  0000:00:01.0+ @ 21003, parent: pci0000:00
[ 8673.672177] initcall 0000:00:01.0_i+ returned 0 after 10 usecs
[ 8673.672179] calling  0000:00:00.0+ @ 21003, parent: pci0000:00
[ 8673.672196] initcall 0000:00:00.0_i+ returned 0 after 12 usecs
[ 8673.672230] calling  reg-dummy+ @ 21003, parent: platform
[ 8673.672236] initcall reg-dummy_i+ returned 0 after 1 usecs
[ 8673.672241] PM: late suspend of devices complete after 48.189 msecs
[ 8673.672357] ACPI: Preparing to enter system sleep state S3
[ 8674.072281] PM: Saving platform NVS memory
[ 8674.072744] Disabling non-boot CPUs ...
[ 8674.176016] CPU 1 is now offline
[ 8674.176615] PM: Calling kvm_suspend+0x0/0x13 [kvm]
[ 8674.176624] PM: Calling irq_gc_suspend+0x0/0x2e
[ 8674.176628] PM: Calling timekeeping_suspend+0x0/0xc3
[ 8674.176667] PM: Calling save_ioapic_entries+0x0/0x52
[ 8674.176732] PM: Calling mce_syscore_suspend+0x0/0x2
[ 8674.176738] PM: Calling i8259A_suspend+0x0/0x1c
[ 8674.176746] PM: Calling cpufreq_bp_suspend+0x0/0x46
[ 8674.176750] PM: Calling lapic_suspend+0x0/0xfd
[ 8674.176750] ACPI: Low-level resume complete
[ 8674.176750] PM: Restoring platform NVS memory
[ 8674.176750] PM: Calling lapic_resume+0x0/0x169
[ 8674.176750] PM: Calling cpufreq_bp_resume+0x0/0x49
[ 8674.176750] PM: Calling i8259A_resume+0x0/0x1e
[ 8674.176750] PM: Calling i8237A_resume+0x0/0x84
[ 8674.176750] PM: Calling mce_syscore_resume+0x0/0x16
[ 8674.176750] PM: Calling ioapic_resume+0x0/0x6c
[ 8674.176750] PM: Calling timekeeping_resume+0x0/0xc0
[ 8674.176750] PM: Calling irq_gc_resume+0x0/0x2f
[ 8674.176750] PM: Calling irq_pm_syscore_resume+0x0/0x7
[ 8674.176750] PM: Calling irqrouter_resume+0x0/0x32
[ 8674.176750] PM: Calling kvm_resume+0x0/0x27 [kvm]
[ 8674.176750] Enabling non-boot CPUs ...
[ 8674.176750] Booting Node 0 Processor 1 APIC 0x1
[ 8674.176750] smpboot cpu 1: start_ip = 9b000
[ 8674.074116] Initializing CPU#1
[ 8674.074116] Calibrating delay loop (skipped) already calibrated this CPU
[ 8674.188491] NMI watchdog enabled, takes one hw-pmu counter.
[ 8674.188725] CPU1 is up
[ 8674.189347] ACPI: Waking up from system sleep state S3
[ 8674.189753] calling  reg-dummy+ @ 21003, parent: platform
[ 8674.189759] initcall reg-dummy_i+ returned 0 after 2 usecs
[ 8674.189787] calling  0000:00:00.0+ @ 21003, parent: pci0000:00
[ 8674.189816] initcall 0000:00:00.0_i+ returned 0 after 24 usecs
[ 8674.189818] calling  0000:00:01.0+ @ 21003, parent: pci0000:00
[ 8674.189836] initcall 0000:00:01.0_i+ returned 0 after 13 usecs
[ 8674.189839] calling  0000:00:09.0+ @ 21003, parent: pci0000:00
[ 8674.189859] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8674.189878] initcall 0000:00:09.0_i+ returned 0 after 34 usecs
[ 8674.189881] calling  0000:00:0a.0+ @ 21003, parent: pci0000:00
[ 8674.189898] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8674.189914] initcall 0000:00:0a.0_i+ returned 0 after 29 usecs
[ 8674.189917] calling  0000:00:11.0+ @ 21003, parent: pci0000:00
[ 8674.189932] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 8674.189963] initcall 0000:00:11.0_i+ returned 0 after 41 usecs
[ 8674.189966] calling  0000:00:12.0+ @ 21003, parent: pci0000:00
[ 8674.189997] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 8674.190002] initcall 0000:00:12.0_i+ returned 0 after 31 usecs
[ 8674.190005] calling  0000:00:12.1+ @ 21003, parent: pci0000:00
[ 8674.190034] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 8674.190038] initcall 0000:00:12.1_i+ returned 0 after 28 usecs
[ 8674.190041] calling  0000:00:12.2+ @ 21003, parent: pci0000:00
[ 8674.204033] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 8674.204063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 8674.204079] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 8674.204084] ehci_hcd 0000:00:12.2: PME# disabled
[ 8674.204088] initcall 0000:00:12.2_i+ returned 0 after 13712 usecs
[ 8674.204091] calling  0000:00:13.0+ @ 21003, parent: pci0000:00
[ 8674.204120] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 8674.204124] initcall 0000:00:13.0_i+ returned 0 after 28 usecs
[ 8674.204127] calling  0000:00:13.1+ @ 21003, parent: pci0000:00
[ 8674.204156] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 8674.204160] initcall 0000:00:13.1_i+ returned 0 after 28 usecs
[ 8674.204163] calling  0000:00:13.2+ @ 21003, parent: pci0000:00
[ 8674.220028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 8674.220058] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 8674.220074] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 8674.220079] ehci_hcd 0000:00:13.2: PME# disabled
[ 8674.220083] initcall 0000:00:13.2_i+ returned 0 after 15542 usecs
[ 8674.220085] calling  0000:00:14.0+ @ 21003, parent: pci0000:00
[ 8674.220120] initcall 0000:00:14.0_i+ returned 0 after 30 usecs
[ 8674.220123] calling  0000:00:14.1+ @ 21003, parent: pci0000:00
[ 8674.220149] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 8674.220163] initcall 0000:00:14.1_i+ returned 0 after 35 usecs
[ 8674.220165] calling  0000:00:14.2+ @ 21003, parent: pci0000:00
[ 8674.220195] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 8674.220207] initcall 0000:00:14.2_i+ returned 0 after 36 usecs
[ 8674.220210] calling  0000:00:14.3+ @ 21003, parent: pci0000:00
[ 8674.220238] initcall 0000:00:14.3_i+ returned 0 after 24 usecs
[ 8674.220241] calling  0000:00:14.4+ @ 21003, parent: pci0000:00
[ 8674.220269] initcall 0000:00:14.4_i+ returned 0 after 23 usecs
[ 8674.220272] calling  0000:00:14.5+ @ 21003, parent: pci0000:00
[ 8674.220301] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 8674.220305] initcall 0000:00:14.5_i+ returned 0 after 28 usecs
[ 8674.220308] calling  0000:00:18.0+ @ 21003, parent: pci0000:00
[ 8674.220318] initcall 0000:00:18.0_i+ returned 0 after 6 usecs
[ 8674.220320] calling  0000:00:18.1+ @ 21003, parent: pci0000:00
[ 8674.220329] initcall 0000:00:18.1_i+ returned 0 after 5 usecs
[ 8674.220332] calling  0000:00:18.2+ @ 21003, parent: pci0000:00
[ 8674.220341] initcall 0000:00:18.2_i+ returned 0 after 5 usecs
[ 8674.220343] calling  0000:00:18.3+ @ 21003, parent: pci0000:00
[ 8674.220354] initcall 0000:00:18.3_i+ returned 0 after 6 usecs
[ 8674.220357] calling  0000:01:05.0+ @ 21003, parent: 0000:00:01.0
[ 8674.220366] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 8674.220377] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 8674.220388] initcall 0000:01:05.0_i+ returned 0 after 27 usecs
[ 8674.220391] calling  0000:04:00.0+ @ 21003, parent: 0000:00:0a.0
[ 8674.220413] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 8674.220421] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 8674.220428] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 8674.220438] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8674.220469] initcall 0000:04:00.0_i+ returned 0 after 72 usecs
[ 8674.220504] calling  pcspkr+ @ 21003, parent: platform
[ 8674.220509] initcall pcspkr_i+ returned 0 after 1 usecs
[ 8674.220512] calling  alarmtimer+ @ 21003, parent: platform
[ 8674.220517] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 8674.220524] calling  serial8250+ @ 21003, parent: platform
[ 8674.220529] initcall serial8250_i+ returned 0 after 1 usecs
[ 8674.220534] calling  i8042+ @ 21003, parent: platform
[ 8674.220540] initcall i8042_i+ returned 0 after 1 usecs
[ 8674.220543] calling  serio0+ @ 21003, parent: i8042
[ 8674.220548] initcall serio0_i+ returned 0 after 1 usecs
[ 8674.220550] calling  serio1+ @ 21003, parent: i8042
[ 8674.220555] initcall serio1_i+ returned 0 after 1 usecs
[ 8674.220562] calling  usb1+ @ 21003, parent: 0000:00:12.2
[ 8674.220567] initcall usb1_i+ returned 0 after 1 usecs
[ 8674.220571] calling  usb2+ @ 21003, parent: 0000:00:13.2
[ 8674.220576] initcall usb2_i+ returned 0 after 1 usecs
[ 8674.220580] calling  usb3+ @ 21003, parent: 0000:00:12.0
[ 8674.220585] initcall usb3_i+ returned 0 after 1 usecs
[ 8674.220590] calling  usb4+ @ 21003, parent: 0000:00:12.1
[ 8674.220595] initcall usb4_i+ returned 0 after 1 usecs
[ 8674.220599] calling  usb5+ @ 21003, parent: 0000:00:13.0
[ 8674.220604] initcall usb5_i+ returned 0 after 1 usecs
[ 8674.220614] calling  host0+ @ 21003, parent: 0000:00:14.1
[ 8674.220619] initcall host0_i+ returned 0 after 1 usecs
[ 8674.220622] calling  host1+ @ 21003, parent: 0000:00:14.1
[ 8674.220627] initcall host1_i+ returned 0 after 1 usecs
[ 8674.220644] calling  host2+ @ 21003, parent: 0000:00:11.0
[ 8674.220649] initcall host2_i+ returned 0 after 1 usecs
[ 8674.220652] calling  host3+ @ 21003, parent: 0000:00:11.0
[ 8674.220657] initcall host3_i+ returned 0 after 1 usecs
[ 8674.220660] calling  host4+ @ 21003, parent: 0000:00:11.0
[ 8674.220665] initcall host4_i+ returned 0 after 1 usecs
[ 8674.220668] calling  host5+ @ 21003, parent: 0000:00:11.0
[ 8674.220673] initcall host5_i+ returned 0 after 1 usecs
[ 8674.220676] calling  host6+ @ 21003, parent: 0000:00:11.0
[ 8674.220681] initcall host6_i+ returned 0 after 1 usecs
[ 8674.220684] calling  host7+ @ 21003, parent: 0000:00:11.0
[ 8674.220689] initcall host7_i+ returned 0 after 1 usecs
[ 8674.220692] calling  usb6+ @ 21003, parent: 0000:00:13.1
[ 8674.220697] initcall usb6_i+ returned 0 after 1 usecs
[ 8674.220701] calling  usb7+ @ 21003, parent: 0000:00:14.5
[ 8674.220706] initcall usb7_i+ returned 0 after 1 usecs
[ 8674.220709] calling  target1:0:0+ @ 21003, parent: host1
[ 8674.220714] initcall target1:0:0_i+ returned 0 after 1 usecs
[ 8674.220717] calling  1:0:0:0+ @ 21003, parent: target1:0:0
[ 8674.220722] initcall 1:0:0:0_i+ returned 0 after 1 usecs
[ 8674.220725] calling  target1:0:1+ @ 21003, parent: host1
[ 8674.220730] initcall target1:0:1_i+ returned 0 after 1 usecs
[ 8674.220733] calling  1:0:1:0+ @ 21003, parent: target1:0:1
[ 8674.220738] initcall 1:0:1:0_i+ returned 0 after 1 usecs
[ 8674.220741] calling  3-3+ @ 21003, parent: usb3
[ 8674.220746] initcall 3-3_i+ returned 0 after 1 usecs
[ 8674.220750] calling  target2:0:0+ @ 21003, parent: host2
[ 8674.220754] initcall target2:0:0_i+ returned 0 after 1 usecs
[ 8674.220757] calling  2:0:0:0+ @ 21003, parent: target2:0:0
[ 8674.220762] initcall 2:0:0:0_i+ returned 0 after 1 usecs
[ 8674.220766] calling  target3:0:0+ @ 21003, parent: host3
[ 8674.220771] initcall target3:0:0_i+ returned 0 after 1 usecs
[ 8674.220773] calling  3:0:0:0+ @ 21003, parent: target3:0:0
[ 8674.220779] initcall 3:0:0:0_i+ returned 0 after 1 usecs
[ 8674.220785] calling  input0+ @ 21003, parent: 3-3:1.0
[ 8674.220791] initcall input0_i+ returned 0 after 1 usecs
[ 8674.220797] calling  4-1+ @ 21003, parent: usb4
[ 8674.220802] initcall 4-1_i+ returned 0 after 1 usecs
[ 8674.220806] calling  input1+ @ 21003, parent: 4-1:1.0
[ 8674.220811] initcall input1_i+ returned 0 after 1 usecs
[ 8674.220815] calling  input2+ @ 21003, parent: 4-1:1.1
[ 8674.220819] initcall input2_i+ returned 0 after 1 usecs
[ 8674.220833] calling  input3+ @ 21003, parent: PNP0C0C:00
[ 8674.220838] initcall input3_i+ returned 0 after 1 usecs
[ 8674.220841] calling  input4+ @ 21003, parent: LNXPWRBN:00
[ 8674.220846] initcall input4_i+ returned 0 after 1 usecs
[ 8674.220855] calling  SP5100 TCO timer+ @ 21003, parent: platform
[ 8674.220860] initcall SP5100 TCO timer_i+ returned 0 after 1 usecs
[ 8674.220865] calling  i2c-0+ @ 21003, parent: none
[ 8674.220870] initcall i2c-0_i+ returned 0 after 1 usecs
[ 8674.220873] calling  i2c-1+ @ 21003, parent: none
[ 8674.220878] initcall i2c-1_i+ returned 0 after 1 usecs
[ 8674.220880] calling  i2c-2+ @ 21003, parent: none
[ 8674.220885] initcall i2c-2_i+ returned 0 after 1 usecs
[ 8674.220888] calling  i2c-3+ @ 21003, parent: none
[ 8674.220893] initcall i2c-3_i+ returned 0 after 1 usecs
[ 8674.220896] calling  i2c-4+ @ 21003, parent: none
[ 8674.220901] initcall i2c-4_i+ returned 0 after 1 usecs
[ 8674.220916] calling  w83627ehf.656+ @ 21003, parent: platform
[ 8674.220922] initcall w83627ehf.656_i+ returned 0 after 1 usecs
[ 8674.220933] PM: early resume of devices complete after 31.182 msecs
[ 8674.220994] calling  0000:00:00.0+ @ 21385
[ 8674.221003] call 0000:00:00.0+ returned 0 after 3 usecs
[ 8674.221007] calling  0000:00:01.0+ @ 21385
[ 8674.221020] call 0000:00:01.0+ returned 0 after 9 usecs
[ 8674.221024] calling  0000:00:09.0+ @ 21385
[ 8674.221031] call 0000:00:09.0+ returned 0 after 3 usecs
[ 8674.221035] calling  0000:00:0a.0+ @ 21385
[ 8674.221042] call 0000:00:0a.0+ returned 0 after 2 usecs
[ 8674.221045] calling  0000:00:11.0+ @ 21385
[ 8674.221047] calling  reg-dummy+ @ 21003
[ 8674.221052] call reg-dummy+ returned 0 after 1 usecs
[ 8674.221058] calling  LNXSYSTM:00+ @ 21003
[ 8674.221064] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8674.221067] call LNXSYSTM:00+ returned 0 after 1 usecs
[ 8674.221069] calling  LNXCPU:00+ @ 21003
[ 8674.221079] call LNXCPU:00+ returned 0 after 4 usecs
[ 8674.221081] calling  LNXCPU:01+ @ 21003
[ 8674.221091] call LNXCPU:01+ returned 0 after 4 usecs
[ 8674.221093] calling  LNXCPU:02+ @ 21003
[ 8674.221102] call LNXCPU:02+ returned 0 after 4 usecs
[ 8674.221105] calling  LNXCPU:03+ @ 21003
[ 8674.221114] call LNXCPU:03+ returned 0 after 4 usecs
[ 8674.221116] calling  device:00+ @ 21003
[ 8674.221123] call device:00+ returned 0 after 2 usecs
[ 8674.221126] calling  PNP0A03:00+ @ 21003
[ 8674.221133] call PNP0A03:00+ returned 0 after 2 usecs
[ 8674.221135] calling  device:01+ @ 21003
[ 8674.221142] call device:01+ returned 0 after 2 usecs
[ 8674.221144] calling  PNP0C02:00+ @ 21003
[ 8674.221149] call PNP0C02:00+ returned 0 after 1 usecs
[ 8674.221152] calling  device:02+ @ 21003
[ 8674.221163] call device:02+ returned 0 after 1 usecs
[ 8674.221170] call 0000:00:11.0+ returned 0 after 117 usecs
[ 8674.221174] calling  0000:00:12.0+ @ 21385
[ 8674.221182] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221201] calling  0000:00:12.1+ @ 21383
[ 8674.221210] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221303] calling  0000:00:12.2+ @ 21367
[ 8674.221313] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8674.221322] calling  device:03+ @ 21003
[ 8674.221327] call device:03+ returned 0 after 1 usecs
[ 8674.221329] calling  device:04+ @ 21003
[ 8674.221333] calling  0000:00:13.0+ @ 21362
[ 8674.221335] call device:04+ returned 0 after 1 usecs
[ 8674.221338] calling  device:05+ @ 21003
[ 8674.221342] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8674.221345] call device:05+ returned 0 after 1 usecs
[ 8674.221347] calling  device:06+ @ 21003
[ 8674.221356] call device:06+ returned 0 after 4 usecs
[ 8674.221358] calling  device:07+ @ 21003
[ 8674.221362] calling  0000:00:13.1+ @ 21361
[ 8674.221364] call device:07+ returned 0 after 1 usecs
[ 8674.221367] calling  device:08+ @ 21003
[ 8674.221372] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8674.221374] call device:08+ returned 0 after 1 usecs
[ 8674.221377] calling  device:09+ @ 21003
[ 8674.221385] call device:09+ returned 0 after 4 usecs
[ 8674.221389] calling  0000:00:13.2+ @ 21366
[ 8674.221396] calling  0000:00:14.0+ @ 21360
[ 8674.221400] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8674.221402] call 0000:00:14.0+ returned 0 after 2 usecs
[ 8674.221406] calling  0000:00:14.1+ @ 21360
[ 8674.221416] calling  0000:00:14.2+ @ 19677
[ 8674.221420] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221427] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221436] call 0000:00:14.1+ returned 0 after 25 usecs
[ 8674.221440] calling  0000:00:14.3+ @ 21360
[ 8674.221445] call 0000:00:14.3+ returned 0 after 1 usecs
[ 8674.221448] calling  0000:00:14.4+ @ 21360
[ 8674.221454] call 0000:00:14.2+ returned 0 after 33 usecs
[ 8674.221459] calling  0000:00:14.5+ @ 19677
[ 8674.221460] call 0000:00:14.4+ returned 0 after 6 usecs
[ 8674.221464] calling  0000:00:18.0+ @ 21360
[ 8674.221469] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8674.221471] call 0000:00:18.0+ returned 0 after 1 usecs
[ 8674.221474] calling  0000:00:18.1+ @ 21360
[ 8674.221481] call 0000:00:18.1+ returned 0 after 3 usecs
[ 8674.221485] calling  0000:00:18.2+ @ 21384
[ 8674.221487] calling  0000:00:18.3+ @ 21360
[ 8674.221491] call 0000:00:18.2+ returned 0 after 1 usecs
[ 8674.221493] call 0000:00:18.3+ returned 0 after 1 usecs
[ 8674.221497] calling  0000:01:05.0+ @ 21384
[ 8674.221499] calling  0000:04:00.0+ @ 21360
[ 8674.221508] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8674.221511] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 8674.221516] radeon 0000:01:05.0: setting latency timer to 64
[ 8674.221518] r8169 0000:04:00.0: PME# disabled
[ 8674.225095] call 0000:04:00.0+ returned 0 after 3507 usecs
[ 8674.225195] calling  device:0a+ @ 21003
[ 8674.225201] call device:0a+ returned 0 after 1 usecs
[ 8674.225203] calling  device:0b+ @ 21003
[ 8674.225208] call device:0b+ returned 0 after 1 usecs
[ 8674.225211] calling  device:0c+ @ 21003
[ 8674.225216] call device:0c+ returned 0 after 1 usecs
[ 8674.225218] calling  device:0d+ @ 21003
[ 8674.225223] call device:0d+ returned 0 after 1 usecs
[ 8674.225226] calling  device:0e+ @ 21003
[ 8674.225230] call device:0e+ returned 0 after 1 usecs
[ 8674.225233] calling  device:0f+ @ 21003
[ 8674.225238] call device:0f+ returned 0 after 1 usecs
[ 8674.225240] calling  device:10+ @ 21003
[ 8674.225245] call device:10+ returned 0 after 1 usecs
[ 8674.225248] calling  device:11+ @ 21003
[ 8674.225252] call device:11+ returned 0 after 1 usecs
[ 8674.225255] calling  device:12+ @ 21003
[ 8674.225260] call device:12+ returned 0 after 1 usecs
[ 8674.225262] calling  device:13+ @ 21003
[ 8674.225267] call device:13+ returned 0 after 1 usecs
[ 8674.225270] calling  device:14+ @ 21003
[ 8674.225275] call device:14+ returned 0 after 1 usecs
[ 8674.225277] calling  device:15+ @ 21003
[ 8674.225282] call device:15+ returned 0 after 1 usecs
[ 8674.225285] calling  PNP0000:00+ @ 21003
[ 8674.225290] call PNP0000:00+ returned 0 after 1 usecs
[ 8674.225293] calling  PNP0200:00+ @ 21003
[ 8674.225297] call PNP0200:00+ returned 0 after 1 usecs
[ 8674.225300] calling  PNP0100:00+ @ 21003
[ 8674.225305] call PNP0100:00+ returned 0 after 1 usecs
[ 8674.225307] calling  PNP0B00:00+ @ 21003
[ 8674.225312] call PNP0B00:00+ returned 0 after 1 usecs
[ 8674.225315] calling  PNP0800:00+ @ 21003
[ 8674.225320] call PNP0800:00+ returned 0 after 1 usecs
[ 8674.225322] calling  PNP0C04:00+ @ 21003
[ 8674.225327] call PNP0C04:00+ returned 0 after 1 usecs
[ 8674.225330] calling  PNP0103:00+ @ 21003
[ 8674.225335] call PNP0103:00+ returned 0 after 1 usecs
[ 8674.225337] calling  PNP0C02:01+ @ 21003
[ 8674.225342] call PNP0C02:01+ returned 0 after 1 usecs
[ 8674.225345] calling  PNP0C02:02+ @ 21003
[ 8674.225350] call PNP0C02:02+ returned 0 after 1 usecs
[ 8674.225352] calling  PNP0501:00+ @ 21003
[ 8674.225357] call PNP0501:00+ returned 0 after 1 usecs
[ 8674.225360] calling  PNP0C02:03+ @ 21003
[ 8674.225365] call PNP0C02:03+ returned 0 after 1 usecs
[ 8674.225367] calling  PNP0C02:04+ @ 21003
[ 8674.225372] call PNP0C02:04+ returned 0 after 1 usecs
[ 8674.225375] calling  device:16+ @ 21003
[ 8674.225380] call device:16+ returned 0 after 1 usecs
[ 8674.225382] calling  device:17+ @ 21003
[ 8674.225387] call device:17+ returned 0 after 1 usecs
[ 8674.225390] calling  device:18+ @ 21003
[ 8674.225395] call device:18+ returned 0 after 1 usecs
[ 8674.225397] calling  device:19+ @ 21003
[ 8674.225402] call device:19+ returned 0 after 1 usecs
[ 8674.225405] calling  device:1a+ @ 21003
[ 8674.225410] call device:1a+ returned 0 after 1 usecs
[ 8674.225412] calling  device:1b+ @ 21003
[ 8674.225417] call device:1b+ returned 0 after 1 usecs
[ 8674.225419] calling  device:1c+ @ 21003
[ 8674.225424] call device:1c+ returned 0 after 1 usecs
[ 8674.225427] calling  device:1d+ @ 21003
[ 8674.225432] call device:1d+ returned 0 after 1 usecs
[ 8674.225434] calling  device:1e+ @ 21003
[ 8674.225439] call device:1e+ returned 0 after 1 usecs
[ 8674.225442] calling  device:1f+ @ 21003
[ 8674.225447] call device:1f+ returned 0 after 1 usecs
[ 8674.225449] calling  device:20+ @ 21003
[ 8674.225454] call device:20+ returned 0 after 1 usecs
[ 8674.225457] calling  PNP0C01:00+ @ 21003
[ 8674.225462] call PNP0C01:00+ returned 0 after 1 usecs
[ 8674.225464] calling  PNP0C0C:00+ @ 21003
[ 8674.225470] call PNP0C0C:00+ returned 0 after 2 usecs
[ 8674.225472] calling  PNP0C0F:00+ @ 21003
[ 8674.225477] call PNP0C0F:00+ returned 0 after 1 usecs
[ 8674.225480] calling  PNP0C0F:01+ @ 21003
[ 8674.225485] call PNP0C0F:01+ returned 0 after 1 usecs
[ 8674.225487] calling  PNP0C0F:02+ @ 21003
[ 8674.225492] call PNP0C0F:02+ returned 0 after 1 usecs
[ 8674.225495] calling  PNP0C0F:03+ @ 21003
[ 8674.225500] call PNP0C0F:03+ returned 0 after 1 usecs
[ 8674.225502] calling  PNP0C0F:04+ @ 21003
[ 8674.225507] call PNP0C0F:04+ returned 0 after 1 usecs
[ 8674.225510] calling  PNP0C0F:05+ @ 21003
[ 8674.225515] call PNP0C0F:05+ returned 0 after 1 usecs
[ 8674.225517] calling  PNP0C0F:06+ @ 21003
[ 8674.225522] call PNP0C0F:06+ returned 0 after 1 usecs
[ 8674.225525] calling  PNP0C0F:07+ @ 21003
[ 8674.225530] call PNP0C0F:07+ returned 0 after 1 usecs
[ 8674.225532] calling  device:21+ @ 21003
[ 8674.225537] call device:21+ returned 0 after 1 usecs
[ 8674.225540] calling  PNP0C14:00+ @ 21003
[ 8674.225545] call PNP0C14:00+ returned 0 after 1 usecs
[ 8674.225547] calling  LNXPWRBN:00+ @ 21003
[ 8674.225552] call LNXPWRBN:00+ returned 0 after 1 usecs
[ 8674.225563] calling  00:00+ @ 21003
[ 8674.225568] call 00:00+ returned 0 after 1 usecs
[ 8674.225570] calling  00:01+ @ 21003
[ 8674.225576] call 00:01+ returned 0 after 2 usecs
[ 8674.225578] calling  00:02+ @ 21003
[ 8674.225583] call 00:02+ returned 0 after 1 usecs
[ 8674.225585] calling  00:03+ @ 21003
[ 8674.225592] call 00:03+ returned 0 after 3 usecs
[ 8674.225594] calling  00:04+ @ 21003
[ 8674.225599] call 00:04+ returned 0 after 1 usecs
[ 8674.225602] calling  00:05+ @ 21003
[ 8674.225606] call 00:05+ returned 0 after 1 usecs
[ 8674.225609] calling  00:06+ @ 21003
[ 8674.225614] call 00:06+ returned 0 after 1 usecs
[ 8674.225616] calling  00:07+ @ 21003
[ 8674.225621] call 00:07+ returned 0 after 1 usecs
[ 8674.225624] calling  00:08+ @ 21003
[ 8674.225629] call 00:08+ returned 0 after 1 usecs
[ 8674.225631] calling  00:09+ @ 21003
[ 8674.226152] serial 00:09: activated
[ 8674.226160] call 00:09+ returned 0 after 513 usecs
[ 8674.226163] calling  00:0a+ @ 21003
[ 8674.226168] call 00:0a+ returned 0 after 1 usecs
[ 8674.226170] calling  00:0b+ @ 21003
[ 8674.226175] call 00:0b+ returned 0 after 1 usecs
[ 8674.226177] calling  00:0c+ @ 21003
[ 8674.226182] call 00:0c+ returned 0 after 1 usecs
[ 8674.226222] calling  pcspkr+ @ 21003
[ 8674.226227] call pcspkr+ returned 0 after 1 usecs
[ 8674.226229] calling  alarmtimer+ @ 21003
[ 8674.226234] call alarmtimer+ returned 0 after 1 usecs
[ 8674.226240] calling  serial8250+ @ 21003
[ 8674.226246] call serial8250+ returned 0 after 2 usecs
[ 8674.226252] calling  i8042+ @ 21003
[ 8674.229187] call i8042+ returned 0 after 2861 usecs
[ 8674.229206] calling  host0+ @ 21386
[ 8674.229212] call host0+ returned 0 after 3 usecs
[ 8674.229218] calling  host1+ @ 21386
[ 8674.229223] call host1+ returned 0 after 1 usecs
[ 8674.229226] calling  host2+ @ 21386
[ 8674.229231] call host2+ returned 0 after 1 usecs
[ 8674.229235] calling  host3+ @ 21386
[ 8674.229240] call host3+ returned 0 after 1 usecs
[ 8674.229243] calling  host4+ @ 21386
[ 8674.229248] call host4+ returned 0 after 1 usecs
[ 8674.229251] calling  host5+ @ 21386
[ 8674.229256] call host5+ returned 0 after 1 usecs
[ 8674.229259] calling  host6+ @ 21386
[ 8674.229264] call host6+ returned 0 after 1 usecs
[ 8674.229267] calling  host7+ @ 21386
[ 8674.229272] call host7+ returned 0 after 1 usecs
[ 8674.229292] calling  serio0+ @ 21003
[ 8674.229299] call serio0+ returned 0 after 4 usecs
[ 8674.229313] calling  serio1+ @ 21003
[ 8674.229318] call serio1+ returned 0 after 1 usecs
[ 8674.229322] calling  rtc0+ @ 21003
[ 8674.229371] call rtc0+ returned 0 after 45 usecs
[ 8674.229540] calling  target1:0:0+ @ 21401
[ 8674.229545] call target1:0:0+ returned 0 after 1 usecs
[ 8674.229548] calling  1:0:0:0+ @ 21401
[ 8674.229557] call 1:0:0:0+ returned 0 after 5 usecs
[ 8674.229564] calling  target1:0:1+ @ 21401
[ 8674.229569] call target1:0:1+ returned 0 after 1 usecs
[ 8674.229572] calling  1:0:1:0+ @ 21401
[ 8674.229578] call 1:0:1:0+ returned 0 after 2 usecs
[ 8674.229639] calling  target2:0:0+ @ 21405
[ 8674.229645] call target2:0:0+ returned 0 after 1 usecs
[ 8674.229647] calling  2:0:0:0+ @ 21405
[ 8674.229654] sd 2:0:0:0: [sda] Starting disk
[ 8674.229706] calling  target3:0:0+ @ 21407
[ 8674.229711] call target3:0:0+ returned 0 after 1 usecs
[ 8674.229713] calling  3:0:0:0+ @ 21407
[ 8674.229718] sd 3:0:0:0: [sdb] Starting disk
[ 8674.240161] r8169 0000:04:00.0: eth3: link down
[ 8674.244028] call 0000:00:12.0+ returned 0 after 22314 usecs
[ 8674.244037] calling  usb3+ @ 21380
[ 8674.244066] call 0000:00:14.5+ returned 0 after 22072 usecs
[ 8674.244072] calling  usb7+ @ 21397
[ 8674.244083] call 0000:00:13.0+ returned 0 after 22211 usecs
[ 8674.244091] calling  usb5+ @ 21369
[ 8674.244102] call 0000:00:13.1+ returned 0 after 22202 usecs
[ 8674.244107] calling  usb6+ @ 21386
[ 8674.244138] call 0000:00:13.2+ returned 0 after 22211 usecs
[ 8674.244144] calling  usb2+ @ 21365
[ 8674.244153] call 0000:00:12.1+ returned 0 after 22409 usecs
[ 8674.244159] calling  usb4+ @ 21375
[ 8674.244180] call 0000:00:12.2+ returned 0 after 22336 usecs
[ 8674.244185] calling  usb1+ @ 21360
[ 8674.250804] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 8674.251048] radeon 0000:01:05.0: WB enabled
[ 8674.272044] call usb2+ returned 0 after 27242 usecs
[ 8674.281983] [drm] ring test succeeded in 1 usecs
[ 8674.281996] [drm] ib test succeeded in 0 usecs
[ 8674.282016] [drm:drm_crtc_helper_set_config], 
[ 8674.282018] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 8674.282031] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 8674.282037] [drm:avivo_crtc_load_lut], 0
[ 8674.282046] [drm:avivo_crtc_load_lut], 0
[ 8674.296044] call usb1+ returned 0 after 50639 usecs
[ 8674.297916] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 8674.297922] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 8674.297926] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 8674.297940] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 8674.297958] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 8674.312058] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 8674.320034] [drm:avivo_crtc_load_lut], 0
[ 8674.320046] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 8674.320057] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 8674.324032] call usb7+ returned 0 after 78082 usecs
[ 8674.324054] call usb5+ returned 0 after 78085 usecs
[ 8674.324078] call usb4+ returned 0 after 78042 usecs
[ 8674.324090] calling  4-1+ @ 21409
[ 8674.324109] call usb6+ returned 0 after 78123 usecs
[ 8674.324140] call usb3+ returned 0 after 78221 usecs
[ 8674.324153] calling  3-3+ @ 21401
[ 8674.336715] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 8674.336733] [drm:avivo_crtc_load_lut], 0
[ 8674.336740] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 8674.336749] call 0000:01:05.0+ returned 0 after 112546 usecs
[ 8674.373069] call 3-3+ returned 0 after 47766 usecs
[ 8674.375112] call 4-1+ returned 0 after 49823 usecs
[ 8674.392500] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 8674.392505] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 8674.392509] ata2.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 8674.400503] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 8674.400507] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 8674.400512] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8674.408435] ata2.00: configured for UDMA/33
[ 8674.424433] ata2.01: configured for UDMA/33
[ 8674.540043] ata7: SATA link down (SStatus 0 SControl 300)
[ 8674.540074] ata8: SATA link down (SStatus 0 SControl 300)
[ 8674.540105] ata6: SATA link down (SStatus 0 SControl 300)
[ 8674.540144] ata5: SATA link down (SStatus 0 SControl 300)
[ 8674.796025] ata3: softreset failed (device not ready)
[ 8674.796029] ata3: applying PMP SRST workaround and retrying
[ 8674.968039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8674.968738] ata3.00: configured for UDMA/100
[ 8674.984235] call 2:0:0:0+ returned 0 after 736896 usecs
[ 8675.922862] r8169 0000:04:00.0: eth3: link up
[ 8684.232019] ata4: softreset failed (device not ready)
[ 8687.692018] ata4: softreset failed (device not ready)
[ 8687.692022] ata4: applying PMP SRST workaround and retrying
[ 8687.864029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8687.876213] ata4.00: configured for UDMA/100
[ 8687.925604] call 3:0:0:0+ returned 0 after 13374887 usecs
[ 8687.925646] calling  input0+ @ 21003
[ 8687.925652] call input0+ returned 0 after 2 usecs
[ 8687.925664] calling  input1+ @ 21003
[ 8687.925705] call input1+ returned 0 after 37 usecs
[ 8687.925709] calling  input2+ @ 21003
[ 8687.925727] call input2+ returned 0 after 13 usecs
[ 8687.925746] calling  input3+ @ 21003
[ 8687.925763] call input3+ returned 0 after 13 usecs
[ 8687.925767] calling  input4+ @ 21003
[ 8687.925784] call input4+ returned 0 after 13 usecs
[ 8687.925796] calling  ttm+ @ 21003
[ 8687.925801] call ttm+ returned 0 after 2 usecs
[ 8687.925805] calling  SP5100 TCO timer+ @ 21003
[ 8687.925811] call SP5100 TCO timer+ returned 0 after 1 usecs
[ 8687.925814] calling  controlD64+ @ 21003
[ 8687.925819] call controlD64+ returned 0 after 1 usecs
[ 8687.925821] calling  card0+ @ 21003
[ 8687.925827] call card0+ returned 0 after 1 usecs
[ 8687.925829] calling  i2c-0+ @ 21003
[ 8687.925835] call i2c-0+ returned 0 after 1 usecs
[ 8687.925837] calling  i2c-1+ @ 21003
[ 8687.925842] call i2c-1+ returned 0 after 1 usecs
[ 8687.925845] calling  i2c-2+ @ 21003
[ 8687.925849] call i2c-2+ returned 0 after 1 usecs
[ 8687.925853] calling  i2c-3+ @ 21003
[ 8687.925857] call i2c-3+ returned 0 after 1 usecs
[ 8687.925860] calling  i2c-4+ @ 21003
[ 8687.925865] call i2c-4+ returned 0 after 1 usecs
[ 8687.925868] calling  card0-VGA-1+ @ 21003
[ 8687.925873] call card0-VGA-1+ returned 0 after 1 usecs
[ 8687.925876] calling  card0-DVI-D-1+ @ 21003
[ 8687.925881] call card0-DVI-D-1+ returned 0 after 1 usecs
[ 8687.925904] calling  w83627ehf.656+ @ 21003
[ 8687.925909] call w83627ehf.656+ returned 0 after 1 usecs
[ 8687.925926] PM: resume of devices complete after 13704.958 msecs
[ 8687.926539] PM: Finishing wakeup.
[ 8687.926541] Restarting tasks ... done.
[ 8688.145769] [drm:avivo_crtc_load_lut], 0
[ 8688.145804] [drm:drm_mode_setcrtc], [CRTC:10]
[ 8688.145824] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 8688.145830] [drm:drm_crtc_helper_set_config], 
[ 8688.145834] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 8688.145868] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 8688.145920] [drm:drm_mode_setcrtc], [CRTC:11]
[ 8688.145923] [drm:drm_crtc_helper_set_config], 
[ 8688.145925] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 8688.145936] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 8688.146130] [drm:avivo_crtc_load_lut], 0
[ 8688.146173] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 8688.146180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 8688.164351] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 8688.164364] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 8688.164370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 8688.164385] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 8688.164388] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 8688.176328] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 8688.176335] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 8688.176339] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 8688.176377] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 8688.176381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 8688.178358] [drm:radeon_atombios_connected_scratch_regs], DFP3 disconnected
[ 8688.178361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] disconnected
[ 8688.178367] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 8688.178373] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[ 8688.178377] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 8688.178382] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[ 8688.178386] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 8688.178391] [drm:drm_mode_prune_invalid], Not using 1280x960 mode -3
[ 8688.178394] [drm:drm_mode_debug_printmodeline], Modeline 34:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 8688.178400] [drm:drm_mode_prune_invalid], Not using 1152x864 mode -3
[ 8688.178403] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 8688.178409] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 8688.178412] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 8688.178418] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 8688.178421] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 8688.178426] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 8688.178429] [drm:drm_mode_debug_printmodeline], Modeline 31:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 8688.178435] [drm:drm_mode_prune_invalid], Not using 832x624 mode -3
[ 8688.178438] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 8688.178444] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178447] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 8688.178452] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178455] [drm:drm_mode_debug_printmodeline], Modeline 20:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 8688.178460] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178463] [drm:drm_mode_debug_printmodeline], Modeline 21:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 8688.178469] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178472] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 8688.178477] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178480] [drm:drm_mode_debug_printmodeline], Modeline 22:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 8688.178486] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178489] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 8688.178494] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178497] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 8688.178502] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178505] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 8688.178511] [drm:drm_mode_prune_invalid], Not using 720x400 mode -3
[ 8688.178515] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 8688.178518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 8688.180741] [drm:radeon_atombios_connected_scratch_regs], DFP3 disconnected
[ 8688.180746] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] disconnected
[ 9069.400626] PM: Syncing filesystems ... done.
[ 9069.999127] PM: Preparing system for mem sleep
[ 9070.036208] [drm:drm_crtc_helper_set_config], 
[ 9070.036212] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9070.036225] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9070.036238] [drm:drm_crtc_helper_set_config], 
[ 9070.036240] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9070.036244] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9070.036255] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9070.067259] [drm:drm_crtc_helper_set_config], 
[ 9070.067261] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9070.067267] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9070.067270] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9070.067272] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9070.067275] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9070.067278] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9070.067282] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9070.067291] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9070.067297] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9070.067300] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9070.067311] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9070.067327] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9070.080054] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 9070.088033] [drm:avivo_crtc_load_lut], 0
[ 9070.088044] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9070.088053] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9070.088056] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:DVI-D-1] set DPMS on
[ 9070.088060] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9070.088065] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9070.105105] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9070.120050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9070.136035] PM: Entering mem sleep
[ 9070.136071] Suspending console(s) (use no_console_suspend to debug)
[ 9070.136294] calling  w83627ehf.656+ @ 21729
[ 9070.136300] call w83627ehf.656+ returned 0 after 2 usecs
[ 9070.136322] calling  card0-DVI-D-1+ @ 21729
[ 9070.136327] call card0-DVI-D-1+ returned 0 after 1 usecs
[ 9070.136330] calling  card0-VGA-1+ @ 21729
[ 9070.136335] call card0-VGA-1+ returned 0 after 1 usecs
[ 9070.136337] calling  i2c-4+ @ 21729
[ 9070.136343] call i2c-4+ returned 0 after 2 usecs
[ 9070.136345] calling  i2c-3+ @ 21729
[ 9070.136350] call i2c-3+ returned 0 after 1 usecs
[ 9070.136353] calling  i2c-2+ @ 21729
[ 9070.136358] call i2c-2+ returned 0 after 1 usecs
[ 9070.136360] calling  i2c-1+ @ 21729
[ 9070.136365] call i2c-1+ returned 0 after 1 usecs
[ 9070.136368] calling  i2c-0+ @ 21729
[ 9070.136373] call i2c-0+ returned 0 after 1 usecs
[ 9070.136376] calling  card0+ @ 21729
[ 9070.136380] call card0+ returned 0 after 1 usecs
[ 9070.136383] calling  controlD64+ @ 21729
[ 9070.136388] call controlD64+ returned 0 after 1 usecs
[ 9070.136391] calling  SP5100 TCO timer+ @ 21729
[ 9070.136396] call SP5100 TCO timer+ returned 0 after 1 usecs
[ 9070.136400] calling  ttm+ @ 21729
[ 9070.136405] call ttm+ returned 0 after 1 usecs
[ 9070.136413] calling  input4+ @ 21729
[ 9070.136419] call input4+ returned 0 after 2 usecs
[ 9070.136422] calling  input3+ @ 21729
[ 9070.136427] call input3+ returned 0 after 1 usecs
[ 9070.136449] calling  input2+ @ 21729
[ 9070.136455] call input2+ returned 0 after 3 usecs
[ 9070.136477] calling  input1+ @ 21729
[ 9070.136482] call input1+ returned 0 after 1 usecs
[ 9070.136497] calling  input0+ @ 21729
[ 9070.136502] call input0+ returned 0 after 1 usecs
[ 9070.136528] calling  4-1+ @ 21408
[ 9070.136566] calling  3:0:0:0+ @ 21407
[ 9070.136575] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 9070.136619] calling  2:0:0:0+ @ 22094
[ 9070.136630] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 9070.136644] calling  rtc0+ @ 21729
[ 9070.136675] call rtc0+ returned 0 after 25 usecs
[ 9070.136678] calling  serio1+ @ 21729
[ 9070.136684] call serio1+ returned 0 after 1 usecs
[ 9070.136686] calling  serio0+ @ 21729
[ 9070.136691] call serio0+ returned 0 after 1 usecs
[ 9070.136694] calling  i8042+ @ 21729
[ 9070.136707] calling  3-3+ @ 22096
[ 9070.136744] calling  1:0:1:0+ @ 22097
[ 9070.136751] call 1:0:1:0+ returned 0 after 3 usecs
[ 9070.136754] calling  target1:0:1+ @ 22097
[ 9070.136761] call target1:0:1+ returned 0 after 3 usecs
[ 9070.136767] calling  1:0:0:0+ @ 22097
[ 9070.136773] call 1:0:0:0+ returned 0 after 2 usecs
[ 9070.136776] calling  target1:0:0+ @ 22097
[ 9070.136784] call target1:0:0+ returned 0 after 2 usecs
[ 9070.136791] calling  usb7+ @ 22097
[ 9070.136821] calling  usb6+ @ 22098
[ 9070.136846] calling  host7+ @ 22099
[ 9070.136851] call host7+ returned 0 after 1 usecs
[ 9070.136856] calling  host6+ @ 22099
[ 9070.136860] call host6+ returned 0 after 1 usecs
[ 9070.136865] calling  host5+ @ 22099
[ 9070.136870] call host5+ returned 0 after 1 usecs
[ 9070.136874] calling  host4+ @ 22099
[ 9070.136879] call host4+ returned 0 after 1 usecs
[ 9070.136915] calling  host1+ @ 22101
[ 9070.136920] call host1+ returned 0 after 1 usecs
[ 9070.136925] calling  host0+ @ 22101
[ 9070.136930] call host0+ returned 0 after 1 usecs
[ 9070.136937] calling  usb5+ @ 22101
[ 9070.136971] call i8042+ returned 0 after 266 usecs
[ 9070.136978] sd 3:0:0:0: [sdb] Stopping disk
[ 9070.136990] calling  serial8250+ @ 21729
[ 9070.136997] call serial8250+ returned 0 after 3 usecs
[ 9070.137007] calling  alarmtimer+ @ 21729
[ 9070.137010] calling  usb2+ @ 22104
[ 9070.137013] call alarmtimer+ returned 0 after 2 usecs
[ 9070.137016] calling  pcspkr+ @ 21729
[ 9070.137021] call pcspkr+ returned 0 after 1 usecs
[ 9070.137045] calling  usb1+ @ 22105
[ 9070.137079] calling  00:0c+ @ 21729
[ 9070.137086] call 00:0c+ returned 0 after 3 usecs
[ 9070.137089] calling  00:0b+ @ 21729
[ 9070.137094] call 00:0b+ returned 0 after 1 usecs
[ 9070.137097] calling  00:0a+ @ 21729
[ 9070.137102] call 00:0a+ returned 0 after 2 usecs
[ 9070.137105] calling  00:09+ @ 21729
[ 9070.137298] serial 00:09: disabled
[ 9070.137304] serial 00:09: wake-up capability disabled by ACPI
[ 9070.137308] call 00:09+ returned 0 after 195 usecs
[ 9070.137311] calling  00:08+ @ 21729
[ 9070.137316] call 00:08+ returned 0 after 1 usecs
[ 9070.137318] calling  00:07+ @ 21729
[ 9070.137323] call 00:07+ returned 0 after 1 usecs
[ 9070.137326] calling  00:06+ @ 21729
[ 9070.137331] call 00:06+ returned 0 after 1 usecs
[ 9070.137333] calling  00:05+ @ 21729
[ 9070.137338] call 00:05+ returned 0 after 1 usecs
[ 9070.137341] calling  00:04+ @ 21729
[ 9070.137345] call 00:04+ returned 0 after 1 usecs
[ 9070.137348] calling  00:03+ @ 21729
[ 9070.137357] call 00:03+ returned 0 after 5 usecs
[ 9070.137360] calling  00:02+ @ 21729
[ 9070.137364] call 00:02+ returned 0 after 1 usecs
[ 9070.137367] calling  00:01+ @ 21729
[ 9070.137372] call 00:01+ returned 0 after 2 usecs
[ 9070.137375] calling  00:00+ @ 21729
[ 9070.137380] call 00:00+ returned 0 after 1 usecs
[ 9070.137410] calling  LNXPWRBN:00+ @ 21729
[ 9070.137415] call LNXPWRBN:00+ returned 0 after 1 usecs
[ 9070.137420] calling  0000:04:00.0+ @ 22107
[ 9070.137422] calling  PNP0C14:00+ @ 21729
[ 9070.137428] call PNP0C14:00+ returned 0 after 2 usecs
[ 9070.137431] calling  device:21+ @ 21729
[ 9070.137435] call device:21+ returned 0 after 1 usecs
[ 9070.137438] calling  PNP0C0F:07+ @ 21729
[ 9070.137443] call PNP0C0F:07+ returned 0 after 1 usecs
[ 9070.137446] calling  PNP0C0F:06+ @ 21729
[ 9070.137451] call PNP0C0F:06+ returned 0 after 1 usecs
[ 9070.137453] calling  PNP0C0F:05+ @ 21729
[ 9070.137459] call PNP0C0F:05+ returned 0 after 2 usecs
[ 9070.137462] calling  PNP0C0F:04+ @ 21729
[ 9070.137466] call PNP0C0F:04+ returned 0 after 1 usecs
[ 9070.137469] calling  PNP0C0F:03+ @ 21729
[ 9070.137474] call PNP0C0F:03+ returned 0 after 1 usecs
[ 9070.137477] calling  PNP0C0F:02+ @ 21729
[ 9070.137481] call PNP0C0F:02+ returned 0 after 1 usecs
[ 9070.137484] calling  PNP0C0F:01+ @ 21729
[ 9070.137489] call PNP0C0F:01+ returned 0 after 1 usecs
[ 9070.137492] calling  PNP0C0F:00+ @ 21729
[ 9070.137497] call PNP0C0F:00+ returned 0 after 1 usecs
[ 9070.137499] calling  PNP0C0C:00+ @ 21729
[ 9070.137504] call PNP0C0C:00+ returned 0 after 1 usecs
[ 9070.137507] calling  PNP0C01:00+ @ 21729
[ 9070.137512] call PNP0C01:00+ returned 0 after 1 usecs
[ 9070.137515] calling  device:20+ @ 21729
[ 9070.137520] call device:20+ returned 0 after 1 usecs
[ 9070.137522] calling  device:1f+ @ 21729
[ 9070.137527] call device:1f+ returned 0 after 1 usecs
[ 9070.137530] calling  device:1e+ @ 21729
[ 9070.137547] call device:1e+ returned 0 after 13 usecs
[ 9070.137550] calling  device:1d+ @ 21729
[ 9070.137554] call device:1d+ returned 0 after 1 usecs
[ 9070.137557] calling  device:1c+ @ 21729
[ 9070.137562] call device:1c+ returned 0 after 1 usecs
[ 9070.137565] calling  device:1b+ @ 21729
[ 9070.137570] call device:1b+ returned 0 after 1 usecs
[ 9070.137572] calling  device:1a+ @ 21729
[ 9070.137577] call device:1a+ returned 0 after 1 usecs
[ 9070.137580] calling  device:19+ @ 21729
[ 9070.137585] call device:19+ returned 0 after 2 usecs
[ 9070.137588] calling  device:18+ @ 21729
[ 9070.137593] call device:18+ returned 0 after 1 usecs
[ 9070.137596] calling  device:17+ @ 21729
[ 9070.137600] call device:17+ returned 0 after 1 usecs
[ 9070.137603] calling  device:16+ @ 21729
[ 9070.137608] call device:16+ returned 0 after 1 usecs
[ 9070.137611] calling  PNP0C02:04+ @ 21729
[ 9070.137615] call PNP0C02:04+ returned 0 after 1 usecs
[ 9070.137618] calling  PNP0C02:03+ @ 21729
[ 9070.137623] call PNP0C02:03+ returned 0 after 1 usecs
[ 9070.137626] calling  PNP0501:00+ @ 21729
[ 9070.137630] call PNP0501:00+ returned 0 after 1 usecs
[ 9070.137633] calling  PNP0C02:02+ @ 21729
[ 9070.137638] call PNP0C02:02+ returned 0 after 1 usecs
[ 9070.137641] calling  PNP0C02:01+ @ 21729
[ 9070.137646] call PNP0C02:01+ returned 0 after 1 usecs
[ 9070.137649] calling  PNP0103:00+ @ 21729
[ 9070.137653] call PNP0103:00+ returned 0 after 1 usecs
[ 9070.137656] calling  PNP0C04:00+ @ 21729
[ 9070.137661] call PNP0C04:00+ returned 0 after 1 usecs
[ 9070.137664] calling  PNP0800:00+ @ 21729
[ 9070.137669] call PNP0800:00+ returned 0 after 1 usecs
[ 9070.137671] calling  PNP0B00:00+ @ 21729
[ 9070.137676] call PNP0B00:00+ returned 0 after 1 usecs
[ 9070.137679] calling  PNP0100:00+ @ 21729
[ 9070.137684] call PNP0100:00+ returned 0 after 1 usecs
[ 9070.137689] call 0000:04:00.0+ returned 0 after 256 usecs
[ 9070.137691] calling  PNP0200:00+ @ 21729
[ 9070.137696] call PNP0200:00+ returned 0 after 1 usecs
[ 9070.137701] sd 2:0:0:0: [sda] Stopping disk
[ 9070.137702] calling  PNP0000:00+ @ 21729
[ 9070.137707] call PNP0000:00+ returned 0 after 1 usecs
[ 9070.137712] calling  0000:01:05.0+ @ 22107
[ 9070.137713] calling  device:15+ @ 21729
[ 9070.137718] call device:15+ returned 0 after 1 usecs
[ 9070.137721] calling  device:14+ @ 21729
[ 9070.137726] call device:14+ returned 0 after 1 usecs
[ 9070.137729] calling  device:13+ @ 21729
[ 9070.137734] call device:13+ returned 0 after 1 usecs
[ 9070.137737] calling  device:12+ @ 21729
[ 9070.137742] call device:12+ returned 0 after 1 usecs
[ 9070.137745] calling  device:11+ @ 21729
[ 9070.137750] call device:11+ returned 0 after 1 usecs
[ 9070.137753] calling  device:10+ @ 21729
[ 9070.137758] call device:10+ returned 0 after 1 usecs
[ 9070.137761] calling  device:0f+ @ 21729
[ 9070.137765] call device:0f+ returned 0 after 1 usecs
[ 9070.137769] calling  device:0e+ @ 21729
[ 9070.137773] call device:0e+ returned 0 after 1 usecs
[ 9070.137776] calling  device:0d+ @ 21729
[ 9070.137781] call device:0d+ returned 0 after 1 usecs
[ 9070.137784] calling  device:0c+ @ 21729
[ 9070.137789] call device:0c+ returned 0 after 1 usecs
[ 9070.137792] calling  device:0b+ @ 21729
[ 9070.137796] call device:0b+ returned 0 after 1 usecs
[ 9070.137799] calling  device:0a+ @ 21729
[ 9070.137804] call device:0a+ returned 0 after 1 usecs
[ 9070.137807] calling  device:09+ @ 21729
[ 9070.137811] call device:09+ returned 0 after 1 usecs
[ 9070.137814] calling  device:08+ @ 21729
[ 9070.137827] r8169 0000:04:00.0: eth3: link down
[ 9070.137834] call device:08+ returned 0 after 1 usecs
[ 9070.137851] calling  device:07+ @ 21729
[ 9070.137856] call device:07+ returned 0 after 1 usecs
[ 9070.137859] calling  device:06+ @ 21729
[ 9070.137864] call device:06+ returned 0 after 1 usecs
[ 9070.137867] calling  device:05+ @ 21729
[ 9070.137871] call device:05+ returned 0 after 1 usecs
[ 9070.137874] calling  device:04+ @ 21729
[ 9070.137879] call device:04+ returned 0 after 1 usecs
[ 9070.137882] calling  device:03+ @ 21729
[ 9070.137887] call device:03+ returned 0 after 1 usecs
[ 9070.137890] calling  device:02+ @ 21729
[ 9070.137895] call device:02+ returned 0 after 1 usecs
[ 9070.137898] calling  PNP0C02:00+ @ 21729
[ 9070.137903] call PNP0C02:00+ returned 0 after 1 usecs
[ 9070.137906] calling  device:01+ @ 21729
[ 9070.137911] call device:01+ returned 0 after 1 usecs
[ 9070.137917] calling  PNP0A03:00+ @ 21729
[ 9070.137922] call PNP0A03:00+ returned 0 after 1 usecs
[ 9070.137926] calling  device:00+ @ 21729
[ 9070.137931] call device:00+ returned 0 after 1 usecs
[ 9070.137934] calling  LNXCPU:03+ @ 21729
[ 9070.137942] call LNXCPU:03+ returned 0 after 4 usecs
[ 9070.137945] calling  LNXCPU:02+ @ 21729
[ 9070.137951] call LNXCPU:02+ returned 0 after 2 usecs
[ 9070.137954] calling  LNXCPU:01+ @ 21729
[ 9070.137960] call LNXCPU:01+ returned 0 after 2 usecs
[ 9070.137962] calling  LNXCPU:00+ @ 21729
[ 9070.137969] call LNXCPU:00+ returned 0 after 2 usecs
[ 9070.137973] calling  LNXSYSTM:00+ @ 21729
[ 9070.137978] call LNXSYSTM:00+ returned 0 after 1 usecs
[ 9070.137985] calling  reg-dummy+ @ 21729
[ 9070.137990] call reg-dummy+ returned 0 after 1 usecs
[ 9070.138072] calling  0000:00:18.3+ @ 22106
[ 9070.138078] call 0000:00:18.3+ returned 0 after 2 usecs
[ 9070.138084] calling  0000:00:18.2+ @ 22106
[ 9070.138089] call 0000:00:18.2+ returned 0 after 1 usecs
[ 9070.138092] calling  0000:00:18.1+ @ 22106
[ 9070.138098] call 0000:00:18.1+ returned 0 after 1 usecs
[ 9070.138101] calling  0000:00:18.0+ @ 22106
[ 9070.138106] call 0000:00:18.0+ returned 0 after 1 usecs
[ 9070.138641] calling  0000:00:14.4+ @ 22108
[ 9070.138648] call 0000:00:14.4+ returned 0 after 2 usecs
[ 9070.138710] calling  0000:00:14.3+ @ 22108
[ 9070.138716] call 0000:00:14.3+ returned 0 after 2 usecs
[ 9070.138729] calling  0000:00:14.2+ @ 22108
[ 9070.138748] calling  0000:00:14.1+ @ 22109
[ 9070.138803] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 9070.139001] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 9070.139012] call 0000:00:14.1+ returned 0 after 253 usecs
[ 9070.139024] calling  0000:00:14.0+ @ 22109
[ 9070.139033] call 0000:00:14.0+ returned 0 after 4 usecs
[ 9070.139814] calling  0000:00:0a.0+ @ 22116
[ 9070.139822] call 0000:00:0a.0+ returned 0 after 4 usecs
[ 9070.139870] calling  0000:00:09.0+ @ 22116
[ 9070.139878] call 0000:00:09.0+ returned 0 after 2 usecs
[ 9070.139904] calling  0000:00:00.0+ @ 22117
[ 9070.139913] call 0000:00:00.0+ returned 0 after 2 usecs
[ 9070.152028] call 3-3+ returned 0 after 14957 usecs
[ 9070.152038] call 0000:00:14.2+ returned 0 after 12994 usecs
[ 9070.152044] call 4-1+ returned 0 after 15149 usecs
[ 9070.152050] calling  usb3+ @ 22103
[ 9070.152063] call usb3+ returned 0 after 9 usecs
[ 9070.152068] calling  usb4+ @ 22102
[ 9070.152080] call usb4+ returned 0 after 7 usecs
[ 9070.152084] calling  0000:00:12.1+ @ 22113
[ 9070.152094] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 9070.152098] call 0000:00:12.1+ returned 0 after 10 usecs
[ 9070.152110] calling  0000:00:12.0+ @ 22114
[ 9070.152120] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 9070.152124] call 0000:00:12.0+ returned 0 after 9 usecs
[ 9070.165022] call usb2+ returned 0 after 27350 usecs
[ 9070.165035] calling  0000:00:13.2+ @ 22109
[ 9070.180027] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 9070.180031] call 0000:00:13.2+ returned 0 after 14639 usecs
[ 9070.189052] call usb1+ returned 0 after 50785 usecs
[ 9070.189065] calling  0000:00:12.2+ @ 22112
[ 9070.204027] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 9070.204031] call 0000:00:12.2+ returned 0 after 14610 usecs
[ 9070.216043] call usb7+ returned 0 after 77391 usecs
[ 9070.216048] calling  0000:00:14.5+ @ 22106
[ 9070.216058] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 9070.216062] call 0000:00:14.5+ returned 0 after 9 usecs
[ 9070.216082] call usb5+ returned 0 after 77286 usecs
[ 9070.216087] calling  0000:00:13.0+ @ 22111
[ 9070.216096] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 9070.216100] call 0000:00:13.0+ returned 0 after 9 usecs
[ 9070.216119] call usb6+ returned 0 after 77436 usecs
[ 9070.216132] calling  0000:00:13.1+ @ 22110
[ 9070.216142] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 9070.216146] call 0000:00:13.1+ returned 0 after 9 usecs
[ 9070.244540] radeon 0000:01:05.0: PCI INT A disabled
[ 9070.260030] call 0000:01:05.0+ returned 0 after 119446 usecs
[ 9070.260047] calling  0000:00:01.0+ @ 22116
[ 9070.260053] call 0000:00:01.0+ returned 0 after 1 usecs
[ 9070.574718] call 3:0:0:0+ returned 0 after 427878 usecs
[ 9070.574735] calling  target3:0:0+ @ 22093
[ 9070.574740] call target3:0:0+ returned 0 after 1 usecs
[ 9070.574751] calling  host3+ @ 22099
[ 9070.574757] call host3+ returned 0 after 1 usecs
[ 9070.786472] call 2:0:0:0+ returned 0 after 634618 usecs
[ 9070.786488] calling  target2:0:0+ @ 22095
[ 9070.786494] call target2:0:0+ returned 0 after 1 usecs
[ 9070.786506] calling  host2+ @ 22100
[ 9070.786511] call host2+ returned 0 after 1 usecs
[ 9070.786528] calling  0000:00:11.0+ @ 22115
[ 9070.786797] ahci 0000:00:11.0: PCI INT A disabled
[ 9070.800031] call 0000:00:11.0+ returned 0 after 13183 usecs
[ 9070.800057] PM: suspend of devices complete after 663.773 msecs
[ 9070.800090] calling  w83627ehf.656+ @ 21729, parent: platform
[ 9070.800096] initcall w83627ehf.656_i+ returned 0 after 2 usecs
[ 9070.800113] calling  i2c-4+ @ 21729, parent: none
[ 9070.800118] initcall i2c-4_i+ returned 0 after 1 usecs
[ 9070.800121] calling  i2c-3+ @ 21729, parent: none
[ 9070.800126] initcall i2c-3_i+ returned 0 after 1 usecs
[ 9070.800128] calling  i2c-2+ @ 21729, parent: none
[ 9070.800133] initcall i2c-2_i+ returned 0 after 1 usecs
[ 9070.800136] calling  i2c-1+ @ 21729, parent: none
[ 9070.800141] initcall i2c-1_i+ returned 0 after 1 usecs
[ 9070.800144] calling  i2c-0+ @ 21729, parent: none
[ 9070.800148] initcall i2c-0_i+ returned 0 after 1 usecs
[ 9070.800152] calling  SP5100 TCO timer+ @ 21729, parent: platform
[ 9070.800157] initcall SP5100 TCO timer_i+ returned 0 after 1 usecs
[ 9070.800166] calling  input4+ @ 21729, parent: LNXPWRBN:00
[ 9070.800171] initcall input4_i+ returned 0 after 1 usecs
[ 9070.800174] calling  input3+ @ 21729, parent: PNP0C0C:00
[ 9070.800179] initcall input3_i+ returned 0 after 1 usecs
[ 9070.800193] calling  input2+ @ 21729, parent: 4-1:1.1
[ 9070.800198] initcall input2_i+ returned 0 after 1 usecs
[ 9070.800203] calling  input1+ @ 21729, parent: 4-1:1.0
[ 9070.800208] initcall input1_i+ returned 0 after 1 usecs
[ 9070.800212] calling  4-1+ @ 21729, parent: usb4
[ 9070.800217] initcall 4-1_i+ returned 0 after 1 usecs
[ 9070.800225] calling  input0+ @ 21729, parent: 3-3:1.0
[ 9070.800230] initcall input0_i+ returned 0 after 1 usecs
[ 9070.800236] calling  3:0:0:0+ @ 21729, parent: target3:0:0
[ 9070.800241] initcall 3:0:0:0_i+ returned 0 after 1 usecs
[ 9070.800243] calling  target3:0:0+ @ 21729, parent: host3
[ 9070.800248] initcall target3:0:0_i+ returned 0 after 1 usecs
[ 9070.800251] calling  2:0:0:0+ @ 21729, parent: target2:0:0
[ 9070.800256] initcall 2:0:0:0_i+ returned 0 after 1 usecs
[ 9070.800259] calling  target2:0:0+ @ 21729, parent: host2
[ 9070.800264] initcall target2:0:0_i+ returned 0 after 1 usecs
[ 9070.800268] calling  3-3+ @ 21729, parent: usb3
[ 9070.800273] initcall 3-3_i+ returned 0 after 1 usecs
[ 9070.800276] calling  1:0:1:0+ @ 21729, parent: target1:0:1
[ 9070.800281] initcall 1:0:1:0_i+ returned 0 after 1 usecs
[ 9070.800284] calling  target1:0:1+ @ 21729, parent: host1
[ 9070.800289] initcall target1:0:1_i+ returned 0 after 1 usecs
[ 9070.800293] calling  1:0:0:0+ @ 21729, parent: target1:0:0
[ 9070.800298] initcall 1:0:0:0_i+ returned 0 after 1 usecs
[ 9070.800300] calling  target1:0:0+ @ 21729, parent: host1
[ 9070.800305] initcall target1:0:0_i+ returned 0 after 1 usecs
[ 9070.800310] calling  usb7+ @ 21729, parent: 0000:00:14.5
[ 9070.800315] initcall usb7_i+ returned 0 after 1 usecs
[ 9070.800319] calling  usb6+ @ 21729, parent: 0000:00:13.1
[ 9070.800324] initcall usb6_i+ returned 0 after 1 usecs
[ 9070.800327] calling  host7+ @ 21729, parent: 0000:00:11.0
[ 9070.800332] initcall host7_i+ returned 0 after 1 usecs
[ 9070.800334] calling  host6+ @ 21729, parent: 0000:00:11.0
[ 9070.800339] initcall host6_i+ returned 0 after 1 usecs
[ 9070.800342] calling  host5+ @ 21729, parent: 0000:00:11.0
[ 9070.800347] initcall host5_i+ returned 0 after 1 usecs
[ 9070.800350] calling  host4+ @ 21729, parent: 0000:00:11.0
[ 9070.800355] initcall host4_i+ returned 0 after 1 usecs
[ 9070.800358] calling  host3+ @ 21729, parent: 0000:00:11.0
[ 9070.800363] initcall host3_i+ returned 0 after 1 usecs
[ 9070.800365] calling  host2+ @ 21729, parent: 0000:00:11.0
[ 9070.800371] initcall host2_i+ returned 0 after 1 usecs
[ 9070.800385] calling  host1+ @ 21729, parent: 0000:00:14.1
[ 9070.800390] initcall host1_i+ returned 0 after 1 usecs
[ 9070.800394] calling  host0+ @ 21729, parent: 0000:00:14.1
[ 9070.800399] initcall host0_i+ returned 0 after 1 usecs
[ 9070.800409] calling  usb5+ @ 21729, parent: 0000:00:13.0
[ 9070.800414] initcall usb5_i+ returned 0 after 1 usecs
[ 9070.800417] calling  usb4+ @ 21729, parent: 0000:00:12.1
[ 9070.800422] initcall usb4_i+ returned 0 after 1 usecs
[ 9070.800426] calling  usb3+ @ 21729, parent: 0000:00:12.0
[ 9070.800431] initcall usb3_i+ returned 0 after 1 usecs
[ 9070.800435] calling  usb2+ @ 21729, parent: 0000:00:13.2
[ 9070.800440] initcall usb2_i+ returned 0 after 1 usecs
[ 9070.800444] calling  usb1+ @ 21729, parent: 0000:00:12.2
[ 9070.800449] initcall usb1_i+ returned 0 after 1 usecs
[ 9070.800455] calling  serio1+ @ 21729, parent: i8042
[ 9070.800460] initcall serio1_i+ returned 0 after 1 usecs
[ 9070.800462] calling  serio0+ @ 21729, parent: i8042
[ 9070.800467] initcall serio0_i+ returned 0 after 1 usecs
[ 9070.800469] calling  i8042+ @ 21729, parent: platform
[ 9070.800475] initcall i8042_i+ returned 0 after 1 usecs
[ 9070.800480] calling  serial8250+ @ 21729, parent: platform
[ 9070.800485] initcall serial8250_i+ returned 0 after 1 usecs
[ 9070.800491] calling  alarmtimer+ @ 21729, parent: platform
[ 9070.800497] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 9070.800499] calling  pcspkr+ @ 21729, parent: platform
[ 9070.800504] initcall pcspkr_i+ returned 0 after 1 usecs
[ 9070.800546] calling  0000:04:00.0+ @ 21729, parent: 0000:00:0a.0
[ 9070.800591] r8169 0000:04:00.0: PME# enabled
[ 9070.800605] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 9070.816096] initcall 0000:04:00.0_i+ returned 0 after 15180 usecs
[ 9070.816099] calling  0000:01:05.0+ @ 21729, parent: 0000:00:01.0
[ 9070.816105] initcall 0000:01:05.0_i+ returned 0 after 1 usecs
[ 9070.816108] calling  0000:00:18.3+ @ 21729, parent: pci0000:00
[ 9070.816117] initcall 0000:00:18.3_i+ returned 0 after 5 usecs
[ 9070.816120] calling  0000:00:18.2+ @ 21729, parent: pci0000:00
[ 9070.816129] initcall 0000:00:18.2_i+ returned 0 after 4 usecs
[ 9070.816131] calling  0000:00:18.1+ @ 21729, parent: pci0000:00
[ 9070.816140] initcall 0000:00:18.1_i+ returned 0 after 4 usecs
[ 9070.816142] calling  0000:00:18.0+ @ 21729, parent: pci0000:00
[ 9070.816151] initcall 0000:00:18.0_i+ returned 0 after 5 usecs
[ 9070.816154] calling  0000:00:14.5+ @ 21729, parent: pci0000:00
[ 9070.816184] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 9070.816189] initcall 0000:00:14.5_i+ returned 0 after 30 usecs
[ 9070.816191] calling  0000:00:14.4+ @ 21729, parent: pci0000:00
[ 9070.816217] initcall 0000:00:14.4_i+ returned 0 after 21 usecs
[ 9070.816220] calling  0000:00:14.3+ @ 21729, parent: pci0000:00
[ 9070.816247] initcall 0000:00:14.3_i+ returned 0 after 22 usecs
[ 9070.816249] calling  0000:00:14.2+ @ 21729, parent: pci0000:00
[ 9070.816255] initcall 0000:00:14.2_i+ returned 0 after 1 usecs
[ 9070.816258] calling  0000:00:14.1+ @ 21729, parent: pci0000:00
[ 9070.816263] initcall 0000:00:14.1_i+ returned 0 after 1 usecs
[ 9070.816266] calling  0000:00:14.0+ @ 21729, parent: pci0000:00
[ 9070.816295] initcall 0000:00:14.0_i+ returned 0 after 24 usecs
[ 9070.816298] calling  0000:00:13.2+ @ 21729, parent: pci0000:00
[ 9070.816332] ehci_hcd 0000:00:13.2: PME# enabled
[ 9070.816337] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 9070.832018] initcall 0000:00:13.2_i+ returned 0 after 15347 usecs
[ 9070.832021] calling  0000:00:13.1+ @ 21729, parent: pci0000:00
[ 9070.832049] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 9070.832054] initcall 0000:00:13.1_i+ returned 0 after 28 usecs
[ 9070.832056] calling  0000:00:13.0+ @ 21729, parent: pci0000:00
[ 9070.832084] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 9070.832088] initcall 0000:00:13.0_i+ returned 0 after 28 usecs
[ 9070.832091] calling  0000:00:12.2+ @ 21729, parent: pci0000:00
[ 9070.832125] ehci_hcd 0000:00:12.2: PME# enabled
[ 9070.832130] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 9070.848018] initcall 0000:00:12.2_i+ returned 0 after 15549 usecs
[ 9070.848021] calling  0000:00:12.1+ @ 21729, parent: pci0000:00
[ 9070.848049] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 9070.848053] initcall 0000:00:12.1_i+ returned 0 after 28 usecs
[ 9070.848056] calling  0000:00:12.0+ @ 21729, parent: pci0000:00
[ 9070.848084] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 9070.848088] initcall 0000:00:12.0_i+ returned 0 after 28 usecs
[ 9070.848091] calling  0000:00:11.0+ @ 21729, parent: pci0000:00
[ 9070.848097] initcall 0000:00:11.0_i+ returned 0 after 1 usecs
[ 9070.848099] calling  0000:00:0a.0+ @ 21729, parent: pci0000:00
[ 9070.848124] initcall 0000:00:0a.0_i+ returned 0 after 21 usecs
[ 9070.848127] calling  0000:00:09.0+ @ 21729, parent: pci0000:00
[ 9070.848153] initcall 0000:00:09.0_i+ returned 0 after 21 usecs
[ 9070.848155] calling  0000:00:01.0+ @ 21729, parent: pci0000:00
[ 9070.848169] initcall 0000:00:01.0_i+ returned 0 after 10 usecs
[ 9070.848172] calling  0000:00:00.0+ @ 21729, parent: pci0000:00
[ 9070.848189] initcall 0000:00:00.0_i+ returned 0 after 13 usecs
[ 9070.848222] calling  reg-dummy+ @ 21729, parent: platform
[ 9070.848228] initcall reg-dummy_i+ returned 0 after 1 usecs
[ 9070.848233] PM: late suspend of devices complete after 48.171 msecs
[ 9070.848374] ACPI: Preparing to enter system sleep state S3
[ 9071.248269] PM: Saving platform NVS memory
[ 9071.248668] Disabling non-boot CPUs ...
[ 9071.352016] CPU 1 is now offline
[ 9071.352664] PM: Calling kvm_suspend+0x0/0x13 [kvm]
[ 9071.352672] PM: Calling irq_gc_suspend+0x0/0x2e
[ 9071.352676] PM: Calling timekeeping_suspend+0x0/0xc3
[ 9071.352714] PM: Calling save_ioapic_entries+0x0/0x52
[ 9071.352781] PM: Calling mce_syscore_suspend+0x0/0x2
[ 9071.352787] PM: Calling i8259A_suspend+0x0/0x1c
[ 9071.352794] PM: Calling cpufreq_bp_suspend+0x0/0x46
[ 9071.352798] PM: Calling lapic_suspend+0x0/0xfd
[ 9071.352798] ACPI: Low-level resume complete
[ 9071.352798] PM: Restoring platform NVS memory
[ 9071.352798] PM: Calling lapic_resume+0x0/0x169
[ 9071.352798] PM: Calling cpufreq_bp_resume+0x0/0x49
[ 9071.352798] PM: Calling i8259A_resume+0x0/0x1e
[ 9071.352798] PM: Calling i8237A_resume+0x0/0x84
[ 9071.352798] PM: Calling mce_syscore_resume+0x0/0x16
[ 9071.352798] PM: Calling ioapic_resume+0x0/0x6c
[ 9071.352798] PM: Calling timekeeping_resume+0x0/0xc0
[ 9071.352798] PM: Calling irq_gc_resume+0x0/0x2f
[ 9071.352798] PM: Calling irq_pm_syscore_resume+0x0/0x7
[ 9071.352798] PM: Calling irqrouter_resume+0x0/0x32
[ 9071.352798] PM: Calling kvm_resume+0x0/0x27 [kvm]
[ 9071.352798] Enabling non-boot CPUs ...
[ 9071.352798] Booting Node 0 Processor 1 APIC 0x1
[ 9071.352798] smpboot cpu 1: start_ip = 9b000
[ 9071.250044] Initializing CPU#1
[ 9071.250044] Calibrating delay loop (skipped) already calibrated this CPU
[ 9071.364476] NMI watchdog enabled, takes one hw-pmu counter.
[ 9071.364721] CPU1 is up
[ 9071.365322] ACPI: Waking up from system sleep state S3
[ 9071.365730] calling  reg-dummy+ @ 21729, parent: platform
[ 9071.365737] initcall reg-dummy_i+ returned 0 after 2 usecs
[ 9071.365764] calling  0000:00:00.0+ @ 21729, parent: pci0000:00
[ 9071.365793] initcall 0000:00:00.0_i+ returned 0 after 24 usecs
[ 9071.365796] calling  0000:00:01.0+ @ 21729, parent: pci0000:00
[ 9071.365813] initcall 0000:00:01.0_i+ returned 0 after 13 usecs
[ 9071.365816] calling  0000:00:09.0+ @ 21729, parent: pci0000:00
[ 9071.365836] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9071.365855] initcall 0000:00:09.0_i+ returned 0 after 33 usecs
[ 9071.365858] calling  0000:00:0a.0+ @ 21729, parent: pci0000:00
[ 9071.365875] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9071.365891] initcall 0000:00:0a.0_i+ returned 0 after 28 usecs
[ 9071.365894] calling  0000:00:11.0+ @ 21729, parent: pci0000:00
[ 9071.365909] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 9071.365940] initcall 0000:00:11.0_i+ returned 0 after 41 usecs
[ 9071.365942] calling  0000:00:12.0+ @ 21729, parent: pci0000:00
[ 9071.365974] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 9071.365979] initcall 0000:00:12.0_i+ returned 0 after 31 usecs
[ 9071.365981] calling  0000:00:12.1+ @ 21729, parent: pci0000:00
[ 9071.366010] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 9071.366014] initcall 0000:00:12.1_i+ returned 0 after 28 usecs
[ 9071.366017] calling  0000:00:12.2+ @ 21729, parent: pci0000:00
[ 9071.380033] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 9071.380063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 9071.380079] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 9071.380084] ehci_hcd 0000:00:12.2: PME# disabled
[ 9071.380088] initcall 0000:00:12.2_i+ returned 0 after 13736 usecs
[ 9071.380091] calling  0000:00:13.0+ @ 21729, parent: pci0000:00
[ 9071.380120] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 9071.380124] initcall 0000:00:13.0_i+ returned 0 after 28 usecs
[ 9071.380127] calling  0000:00:13.1+ @ 21729, parent: pci0000:00
[ 9071.380155] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 9071.380160] initcall 0000:00:13.1_i+ returned 0 after 28 usecs
[ 9071.380162] calling  0000:00:13.2+ @ 21729, parent: pci0000:00
[ 9071.396028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 9071.396058] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 9071.396074] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 9071.396079] ehci_hcd 0000:00:13.2: PME# disabled
[ 9071.396083] initcall 0000:00:13.2_i+ returned 0 after 15543 usecs
[ 9071.396085] calling  0000:00:14.0+ @ 21729, parent: pci0000:00
[ 9071.396120] initcall 0000:00:14.0_i+ returned 0 after 30 usecs
[ 9071.396123] calling  0000:00:14.1+ @ 21729, parent: pci0000:00
[ 9071.396148] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 9071.396162] initcall 0000:00:14.1_i+ returned 0 after 34 usecs
[ 9071.396165] calling  0000:00:14.2+ @ 21729, parent: pci0000:00
[ 9071.396194] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 9071.396206] initcall 0000:00:14.2_i+ returned 0 after 36 usecs
[ 9071.396209] calling  0000:00:14.3+ @ 21729, parent: pci0000:00
[ 9071.396238] initcall 0000:00:14.3_i+ returned 0 after 24 usecs
[ 9071.396241] calling  0000:00:14.4+ @ 21729, parent: pci0000:00
[ 9071.396268] initcall 0000:00:14.4_i+ returned 0 after 23 usecs
[ 9071.396271] calling  0000:00:14.5+ @ 21729, parent: pci0000:00
[ 9071.396300] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 9071.396304] initcall 0000:00:14.5_i+ returned 0 after 28 usecs
[ 9071.396307] calling  0000:00:18.0+ @ 21729, parent: pci0000:00
[ 9071.396317] initcall 0000:00:18.0_i+ returned 0 after 6 usecs
[ 9071.396319] calling  0000:00:18.1+ @ 21729, parent: pci0000:00
[ 9071.396329] initcall 0000:00:18.1_i+ returned 0 after 5 usecs
[ 9071.396331] calling  0000:00:18.2+ @ 21729, parent: pci0000:00
[ 9071.396340] initcall 0000:00:18.2_i+ returned 0 after 4 usecs
[ 9071.396343] calling  0000:00:18.3+ @ 21729, parent: pci0000:00
[ 9071.396354] initcall 0000:00:18.3_i+ returned 0 after 6 usecs
[ 9071.396356] calling  0000:01:05.0+ @ 21729, parent: 0000:00:01.0
[ 9071.396366] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 9071.396377] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 9071.396387] initcall 0000:01:05.0_i+ returned 0 after 26 usecs
[ 9071.396391] calling  0000:04:00.0+ @ 21729, parent: 0000:00:0a.0
[ 9071.396412] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 9071.396421] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 9071.396427] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 9071.396437] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9071.396469] initcall 0000:04:00.0_i+ returned 0 after 72 usecs
[ 9071.396503] calling  pcspkr+ @ 21729, parent: platform
[ 9071.396508] initcall pcspkr_i+ returned 0 after 1 usecs
[ 9071.396511] calling  alarmtimer+ @ 21729, parent: platform
[ 9071.396517] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 9071.396523] calling  serial8250+ @ 21729, parent: platform
[ 9071.396528] initcall serial8250_i+ returned 0 after 1 usecs
[ 9071.396533] calling  i8042+ @ 21729, parent: platform
[ 9071.396538] initcall i8042_i+ returned 0 after 1 usecs
[ 9071.396540] calling  serio0+ @ 21729, parent: i8042
[ 9071.396546] initcall serio0_i+ returned 0 after 1 usecs
[ 9071.396548] calling  serio1+ @ 21729, parent: i8042
[ 9071.396553] initcall serio1_i+ returned 0 after 1 usecs
[ 9071.396559] calling  usb1+ @ 21729, parent: 0000:00:12.2
[ 9071.396564] initcall usb1_i+ returned 0 after 1 usecs
[ 9071.396569] calling  usb2+ @ 21729, parent: 0000:00:13.2
[ 9071.396573] initcall usb2_i+ returned 0 after 1 usecs
[ 9071.396577] calling  usb3+ @ 21729, parent: 0000:00:12.0
[ 9071.396583] initcall usb3_i+ returned 0 after 1 usecs
[ 9071.396587] calling  usb4+ @ 21729, parent: 0000:00:12.1
[ 9071.396592] initcall usb4_i+ returned 0 after 1 usecs
[ 9071.396596] calling  usb5+ @ 21729, parent: 0000:00:13.0
[ 9071.396601] initcall usb5_i+ returned 0 after 1 usecs
[ 9071.396611] calling  host0+ @ 21729, parent: 0000:00:14.1
[ 9071.396616] initcall host0_i+ returned 0 after 1 usecs
[ 9071.396619] calling  host1+ @ 21729, parent: 0000:00:14.1
[ 9071.396624] initcall host1_i+ returned 0 after 1 usecs
[ 9071.396641] calling  host2+ @ 21729, parent: 0000:00:11.0
[ 9071.396646] initcall host2_i+ returned 0 after 1 usecs
[ 9071.396648] calling  host3+ @ 21729, parent: 0000:00:11.0
[ 9071.396653] initcall host3_i+ returned 0 after 1 usecs
[ 9071.396656] calling  host4+ @ 21729, parent: 0000:00:11.0
[ 9071.396661] initcall host4_i+ returned 0 after 1 usecs
[ 9071.396664] calling  host5+ @ 21729, parent: 0000:00:11.0
[ 9071.396669] initcall host5_i+ returned 0 after 1 usecs
[ 9071.396672] calling  host6+ @ 21729, parent: 0000:00:11.0
[ 9071.396677] initcall host6_i+ returned 0 after 1 usecs
[ 9071.396680] calling  host7+ @ 21729, parent: 0000:00:11.0
[ 9071.396685] initcall host7_i+ returned 0 after 1 usecs
[ 9071.396688] calling  usb6+ @ 21729, parent: 0000:00:13.1
[ 9071.396693] initcall usb6_i+ returned 0 after 1 usecs
[ 9071.396696] calling  usb7+ @ 21729, parent: 0000:00:14.5
[ 9071.396701] initcall usb7_i+ returned 0 after 1 usecs
[ 9071.396705] calling  target1:0:0+ @ 21729, parent: host1
[ 9071.396710] initcall target1:0:0_i+ returned 0 after 1 usecs
[ 9071.396712] calling  1:0:0:0+ @ 21729, parent: target1:0:0
[ 9071.396717] initcall 1:0:0:0_i+ returned 0 after 1 usecs
[ 9071.396721] calling  target1:0:1+ @ 21729, parent: host1
[ 9071.396726] initcall target1:0:1_i+ returned 0 after 1 usecs
[ 9071.396728] calling  1:0:1:0+ @ 21729, parent: target1:0:1
[ 9071.396733] initcall 1:0:1:0_i+ returned 0 after 1 usecs
[ 9071.396737] calling  3-3+ @ 21729, parent: usb3
[ 9071.396741] initcall 3-3_i+ returned 0 after 1 usecs
[ 9071.396745] calling  target2:0:0+ @ 21729, parent: host2
[ 9071.396750] initcall target2:0:0_i+ returned 0 after 1 usecs
[ 9071.396753] calling  2:0:0:0+ @ 21729, parent: target2:0:0
[ 9071.396758] initcall 2:0:0:0_i+ returned 0 after 1 usecs
[ 9071.396761] calling  target3:0:0+ @ 21729, parent: host3
[ 9071.396766] initcall target3:0:0_i+ returned 0 after 1 usecs
[ 9071.396769] calling  3:0:0:0+ @ 21729, parent: target3:0:0
[ 9071.396774] initcall 3:0:0:0_i+ returned 0 after 1 usecs
[ 9071.396781] calling  input0+ @ 21729, parent: 3-3:1.0
[ 9071.396786] initcall input0_i+ returned 0 after 1 usecs
[ 9071.396793] calling  4-1+ @ 21729, parent: usb4
[ 9071.396798] initcall 4-1_i+ returned 0 after 1 usecs
[ 9071.396802] calling  input1+ @ 21729, parent: 4-1:1.0
[ 9071.396807] initcall input1_i+ returned 0 after 1 usecs
[ 9071.396811] calling  input2+ @ 21729, parent: 4-1:1.1
[ 9071.396815] initcall input2_i+ returned 0 after 1 usecs
[ 9071.396829] calling  input3+ @ 21729, parent: PNP0C0C:00
[ 9071.396834] initcall input3_i+ returned 0 after 1 usecs
[ 9071.396837] calling  input4+ @ 21729, parent: LNXPWRBN:00
[ 9071.396842] initcall input4_i+ returned 0 after 1 usecs
[ 9071.396850] calling  SP5100 TCO timer+ @ 21729, parent: platform
[ 9071.396855] initcall SP5100 TCO timer_i+ returned 0 after 1 usecs
[ 9071.396860] calling  i2c-0+ @ 21729, parent: none
[ 9071.396865] initcall i2c-0_i+ returned 0 after 1 usecs
[ 9071.396867] calling  i2c-1+ @ 21729, parent: none
[ 9071.396872] initcall i2c-1_i+ returned 0 after 1 usecs
[ 9071.396875] calling  i2c-2+ @ 21729, parent: none
[ 9071.396880] initcall i2c-2_i+ returned 0 after 1 usecs
[ 9071.396882] calling  i2c-3+ @ 21729, parent: none
[ 9071.396887] initcall i2c-3_i+ returned 0 after 1 usecs
[ 9071.396890] calling  i2c-4+ @ 21729, parent: none
[ 9071.396895] initcall i2c-4_i+ returned 0 after 1 usecs
[ 9071.396910] calling  w83627ehf.656+ @ 21729, parent: platform
[ 9071.396916] initcall w83627ehf.656_i+ returned 0 after 1 usecs
[ 9071.396927] PM: early resume of devices complete after 31.199 msecs
[ 9071.396989] calling  0000:00:00.0+ @ 22117
[ 9071.396998] call 0000:00:00.0+ returned 0 after 3 usecs
[ 9071.397002] calling  0000:00:01.0+ @ 22117
[ 9071.397015] call 0000:00:01.0+ returned 0 after 9 usecs
[ 9071.397020] calling  0000:00:09.0+ @ 22117
[ 9071.397028] call 0000:00:09.0+ returned 0 after 4 usecs
[ 9071.397031] calling  0000:00:0a.0+ @ 22117
[ 9071.397038] call 0000:00:0a.0+ returned 0 after 2 usecs
[ 9071.397043] calling  0000:00:11.0+ @ 22115
[ 9071.397047] calling  0000:00:12.0+ @ 22117
[ 9071.397062] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397066] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9071.397082] calling  0000:00:12.1+ @ 22100
[ 9071.397092] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397111] calling  0000:00:12.2+ @ 22095
[ 9071.397122] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9071.397140] calling  0000:00:13.0+ @ 22094
[ 9071.397149] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9071.397166] call 0000:00:11.0+ returned 0 after 115 usecs
[ 9071.397171] calling  0000:00:13.1+ @ 22099
[ 9071.397173] calling  0000:00:13.2+ @ 22115
[ 9071.397181] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9071.397184] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9071.397298] calling  0000:00:14.0+ @ 22093
[ 9071.397304] call 0000:00:14.0+ returned 0 after 2 usecs
[ 9071.397306] calling  0000:00:14.1+ @ 22093
[ 9071.397315] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397327] call 0000:00:14.1+ returned 0 after 16 usecs
[ 9071.397330] calling  0000:00:14.2+ @ 22093
[ 9071.397339] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397350] calling  0000:00:14.3+ @ 21407
[ 9071.397355] call 0000:00:14.3+ returned 0 after 1 usecs
[ 9071.397358] calling  0000:00:14.4+ @ 21407
[ 9071.397367] call 0000:00:14.2+ returned 0 after 33 usecs
[ 9071.397373] call 0000:00:14.4+ returned 0 after 9 usecs
[ 9071.397375] calling  0000:00:14.5+ @ 22093
[ 9071.397379] calling  0000:00:18.0+ @ 21407
[ 9071.397384] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9071.397389] call 0000:00:18.0+ returned 0 after 2 usecs
[ 9071.397392] calling  0000:00:18.1+ @ 21407
[ 9071.397399] call 0000:00:18.1+ returned 0 after 3 usecs
[ 9071.397402] calling  0000:00:18.2+ @ 22116
[ 9071.397406] calling  0000:00:18.3+ @ 21407
[ 9071.397408] call 0000:00:18.2+ returned 0 after 1 usecs
[ 9071.397412] call 0000:00:18.3+ returned 0 after 1 usecs
[ 9071.397414] calling  0000:01:05.0+ @ 22116
[ 9071.397418] calling  0000:04:00.0+ @ 21407
[ 9071.397449] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9071.397454] radeon 0000:01:05.0: setting latency timer to 64
[ 9071.397485] calling  reg-dummy+ @ 21729
[ 9071.397492] call reg-dummy+ returned 0 after 2 usecs
[ 9071.397498] calling  LNXSYSTM:00+ @ 21729
[ 9071.397503] call LNXSYSTM:00+ returned 0 after 1 usecs
[ 9071.397505] calling  LNXCPU:00+ @ 21729
[ 9071.397515] call LNXCPU:00+ returned 0 after 5 usecs
[ 9071.397518] calling  LNXCPU:01+ @ 21729
[ 9071.397526] call LNXCPU:01+ returned 0 after 4 usecs
[ 9071.397528] calling  LNXCPU:02+ @ 21729
[ 9071.397537] call LNXCPU:02+ returned 0 after 4 usecs
[ 9071.397539] calling  LNXCPU:03+ @ 21729
[ 9071.397548] call LNXCPU:03+ returned 0 after 4 usecs
[ 9071.397550] calling  device:00+ @ 21729
[ 9071.397557] call device:00+ returned 0 after 2 usecs
[ 9071.397559] calling  PNP0A03:00+ @ 21729
[ 9071.397565] call PNP0A03:00+ returned 0 after 2 usecs
[ 9071.397568] calling  device:01+ @ 21729
[ 9071.397574] call device:01+ returned 0 after 2 usecs
[ 9071.397577] calling  PNP0C02:00+ @ 21729
[ 9071.397583] call PNP0C02:00+ returned 0 after 2 usecs
[ 9071.397586] calling  device:02+ @ 21729
[ 9071.397592] call device:02+ returned 0 after 2 usecs
[ 9071.397595] calling  device:03+ @ 21729
[ 9071.397601] call device:03+ returned 0 after 2 usecs
[ 9071.397604] calling  device:04+ @ 21729
[ 9071.397610] call device:04+ returned 0 after 2 usecs
[ 9071.397612] calling  device:05+ @ 21729
[ 9071.397619] call device:05+ returned 0 after 2 usecs
[ 9071.397621] calling  device:06+ @ 21729
[ 9071.397628] call device:06+ returned 0 after 2 usecs
[ 9071.397631] calling  device:07+ @ 21729
[ 9071.397636] call device:07+ returned 0 after 2 usecs
[ 9071.397639] calling  device:08+ @ 21729
[ 9071.397805] call device:08+ returned 0 after 2 usecs
[ 9071.397808] calling  device:09+ @ 21729
[ 9071.397813] call device:09+ returned 0 after 2 usecs
[ 9071.397816] calling  device:0a+ @ 21729
[ 9071.397822] call device:0a+ returned 0 after 2 usecs
[ 9071.397825] calling  device:0b+ @ 21729
[ 9071.397831] call device:0b+ returned 0 after 2 usecs
[ 9071.397833] calling  device:0c+ @ 21729
[ 9071.397838] call device:0c+ returned 0 after 1 usecs
[ 9071.397840] calling  device:0d+ @ 21729
[ 9071.397845] call device:0d+ returned 0 after 1 usecs
[ 9071.397847] calling  device:0e+ @ 21729
[ 9071.397852] call device:0e+ returned 0 after 1 usecs
[ 9071.397855] calling  device:0f+ @ 21729
[ 9071.397859] call device:0f+ returned 0 after 1 usecs
[ 9071.397862] calling  device:10+ @ 21729
[ 9071.397866] call device:10+ returned 0 after 1 usecs
[ 9071.397869] calling  device:11+ @ 21729
[ 9071.397874] call device:11+ returned 0 after 1 usecs
[ 9071.397876] calling  device:12+ @ 21729
[ 9071.397881] call device:12+ returned 0 after 1 usecs
[ 9071.397883] calling  device:13+ @ 21729
[ 9071.397888] call device:13+ returned 0 after 1 usecs
[ 9071.397891] calling  device:14+ @ 21729
[ 9071.397895] call device:14+ returned 0 after 1 usecs
[ 9071.397898] calling  device:15+ @ 21729
[ 9071.397903] call device:15+ returned 0 after 1 usecs
[ 9071.397905] calling  PNP0000:00+ @ 21729
[ 9071.397910] call PNP0000:00+ returned 0 after 1 usecs
[ 9071.397912] calling  PNP0200:00+ @ 21729
[ 9071.397917] call PNP0200:00+ returned 0 after 1 usecs
[ 9071.397919] calling  PNP0100:00+ @ 21729
[ 9071.397924] call PNP0100:00+ returned 0 after 1 usecs
[ 9071.397926] calling  PNP0B00:00+ @ 21729
[ 9071.397931] call PNP0B00:00+ returned 0 after 1 usecs
[ 9071.397934] calling  PNP0800:00+ @ 21729
[ 9071.397938] call PNP0800:00+ returned 0 after 1 usecs
[ 9071.397941] calling  PNP0C04:00+ @ 21729
[ 9071.397946] call PNP0C04:00+ returned 0 after 1 usecs
[ 9071.397948] calling  PNP0103:00+ @ 21729
[ 9071.397953] call PNP0103:00+ returned 0 after 1 usecs
[ 9071.397956] calling  PNP0C02:01+ @ 21729
[ 9071.397961] call PNP0C02:01+ returned 0 after 1 usecs
[ 9071.397963] calling  PNP0C02:02+ @ 21729
[ 9071.397968] call PNP0C02:02+ returned 0 after 1 usecs
[ 9071.397971] calling  PNP0501:00+ @ 21729
[ 9071.397976] call PNP0501:00+ returned 0 after 1 usecs
[ 9071.397978] calling  PNP0C02:03+ @ 21729
[ 9071.397983] call PNP0C02:03+ returned 0 after 1 usecs
[ 9071.397985] calling  PNP0C02:04+ @ 21729
[ 9071.397990] call PNP0C02:04+ returned 0 after 1 usecs
[ 9071.397993] calling  device:16+ @ 21729
[ 9071.397997] call device:16+ returned 0 after 1 usecs
[ 9071.398000] calling  device:17+ @ 21729
[ 9071.398005] call device:17+ returned 0 after 1 usecs
[ 9071.398007] calling  device:18+ @ 21729
[ 9071.398012] call device:18+ returned 0 after 1 usecs
[ 9071.398014] calling  device:19+ @ 21729
[ 9071.398019] call device:19+ returned 0 after 1 usecs
[ 9071.398022] calling  device:1a+ @ 21729
[ 9071.398026] call device:1a+ returned 0 after 1 usecs
[ 9071.398029] calling  device:1b+ @ 21729
[ 9071.398033] call device:1b+ returned 0 after 1 usecs
[ 9071.398036] calling  device:1c+ @ 21729
[ 9071.398040] call device:1c+ returned 0 after 1 usecs
[ 9071.398043] calling  device:1d+ @ 21729
[ 9071.398048] call device:1d+ returned 0 after 1 usecs
[ 9071.398050] calling  device:1e+ @ 21729
[ 9071.398055] call device:1e+ returned 0 after 1 usecs
[ 9071.398057] calling  device:1f+ @ 21729
[ 9071.398062] call device:1f+ returned 0 after 1 usecs
[ 9071.398064] calling  device:20+ @ 21729
[ 9071.398069] call device:20+ returned 0 after 1 usecs
[ 9071.398072] calling  PNP0C01:00+ @ 21729
[ 9071.398077] call PNP0C01:00+ returned 0 after 1 usecs
[ 9071.398079] calling  PNP0C0C:00+ @ 21729
[ 9071.398084] call PNP0C0C:00+ returned 0 after 2 usecs
[ 9071.398087] calling  PNP0C0F:00+ @ 21729
[ 9071.398092] call PNP0C0F:00+ returned 0 after 1 usecs
[ 9071.398094] calling  PNP0C0F:01+ @ 21729
[ 9071.398099] call PNP0C0F:01+ returned 0 after 1 usecs
[ 9071.398101] calling  PNP0C0F:02+ @ 21729
[ 9071.398106] call PNP0C0F:02+ returned 0 after 1 usecs
[ 9071.398109] calling  PNP0C0F:03+ @ 21729
[ 9071.398114] call PNP0C0F:03+ returned 0 after 1 usecs
[ 9071.398116] calling  PNP0C0F:04+ @ 21729
[ 9071.398121] call PNP0C0F:04+ returned 0 after 1 usecs
[ 9071.398124] calling  PNP0C0F:05+ @ 21729
[ 9071.398128] call PNP0C0F:05+ returned 0 after 1 usecs
[ 9071.398131] calling  PNP0C0F:06+ @ 21729
[ 9071.398136] call PNP0C0F:06+ returned 0 after 1 usecs
[ 9071.398138] calling  PNP0C0F:07+ @ 21729
[ 9071.398143] call PNP0C0F:07+ returned 0 after 1 usecs
[ 9071.398146] calling  device:21+ @ 21729
[ 9071.398150] call device:21+ returned 0 after 1 usecs
[ 9071.398153] calling  PNP0C14:00+ @ 21729
[ 9071.398158] call PNP0C14:00+ returned 0 after 1 usecs
[ 9071.398160] calling  LNXPWRBN:00+ @ 21729
[ 9071.398165] call LNXPWRBN:00+ returned 0 after 1 usecs
[ 9071.398174] calling  00:00+ @ 21729
[ 9071.398179] call 00:00+ returned 0 after 1 usecs
[ 9071.398181] calling  00:01+ @ 21729
[ 9071.398282] calling  host0+ @ 22126
[ 9071.398288] call host0+ returned 0 after 2 usecs
[ 9071.398291] calling  host1+ @ 22126
[ 9071.398298] call host1+ returned 0 after 2 usecs
[ 9071.398301] calling  host2+ @ 22126
[ 9071.398306] call host2+ returned 0 after 1 usecs
[ 9071.398309] calling  host3+ @ 22126
[ 9071.398314] call host3+ returned 0 after 1 usecs
[ 9071.398317] calling  host4+ @ 22126
[ 9071.398322] call host4+ returned 0 after 1 usecs
[ 9071.398325] calling  host5+ @ 22126
[ 9071.398330] call host5+ returned 0 after 1 usecs
[ 9071.398333] calling  host6+ @ 22126
[ 9071.398338] call host6+ returned 0 after 1 usecs
[ 9071.398341] calling  host7+ @ 22126
[ 9071.398346] call host7+ returned 0 after 1 usecs
[ 9071.398457] calling  target1:0:0+ @ 22134
[ 9071.398462] call target1:0:0+ returned 0 after 1 usecs
[ 9071.398466] calling  1:0:0:0+ @ 22134
[ 9071.398474] call 1:0:0:0+ returned 0 after 5 usecs
[ 9071.398478] calling  target1:0:1+ @ 22134
[ 9071.398483] call target1:0:1+ returned 0 after 1 usecs
[ 9071.398485] calling  1:0:1:0+ @ 22134
[ 9071.398491] call 1:0:1:0+ returned 0 after 2 usecs
[ 9071.398549] calling  target2:0:0+ @ 22138
[ 9071.398554] call target2:0:0+ returned 0 after 1 usecs
[ 9071.398557] calling  2:0:0:0+ @ 22138
[ 9071.398562] sd 2:0:0:0: [sda] Starting disk
[ 9071.398618] calling  target3:0:0+ @ 22140
[ 9071.398623] call target3:0:0+ returned 0 after 1 usecs
[ 9071.398626] calling  3:0:0:0+ @ 22140
[ 9071.398630] sd 3:0:0:0: [sdb] Starting disk
[ 9071.398777] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 9071.398783] r8169 0000:04:00.0: PME# disabled
[ 9071.402300] call 0000:04:00.0+ returned 0 after 4765 usecs
[ 9071.402323] call 00:01+ returned 0 after 4041 usecs
[ 9071.402326] calling  00:02+ @ 21729
[ 9071.402331] call 00:02+ returned 0 after 1 usecs
[ 9071.402333] calling  00:03+ @ 21729
[ 9071.402615] call 00:03+ returned 0 after 271 usecs
[ 9071.402618] calling  00:04+ @ 21729
[ 9071.402623] call 00:04+ returned 0 after 1 usecs
[ 9071.402626] calling  00:05+ @ 21729
[ 9071.402631] call 00:05+ returned 0 after 1 usecs
[ 9071.402633] calling  00:06+ @ 21729
[ 9071.402638] call 00:06+ returned 0 after 1 usecs
[ 9071.402640] calling  00:07+ @ 21729
[ 9071.402761] call 00:07+ returned 0 after 115 usecs
[ 9071.402764] calling  00:08+ @ 21729
[ 9071.402770] call 00:08+ returned 0 after 2 usecs
[ 9071.402772] calling  00:09+ @ 21729
[ 9071.403269] serial 00:09: activated
[ 9071.403277] call 00:09+ returned 0 after 489 usecs
[ 9071.403280] calling  00:0a+ @ 21729
[ 9071.403285] call 00:0a+ returned 0 after 1 usecs
[ 9071.403288] calling  00:0b+ @ 21729
[ 9071.403293] call 00:0b+ returned 0 after 1 usecs
[ 9071.403296] calling  00:0c+ @ 21729
[ 9071.403301] call 00:0c+ returned 0 after 1 usecs
[ 9071.403350] calling  pcspkr+ @ 21729
[ 9071.403355] call pcspkr+ returned 0 after 1 usecs
[ 9071.403358] calling  alarmtimer+ @ 21729
[ 9071.403363] call alarmtimer+ returned 0 after 1 usecs
[ 9071.403371] calling  serial8250+ @ 21729
[ 9071.403376] call serial8250+ returned 0 after 2 usecs
[ 9071.403382] calling  i8042+ @ 21729
[ 9071.406319] call i8042+ returned 0 after 2861 usecs
[ 9071.406331] calling  serio0+ @ 21729
[ 9071.406337] call serio0+ returned 0 after 2 usecs
[ 9071.406339] calling  serio1+ @ 21729
[ 9071.406344] call serio1+ returned 0 after 1 usecs
[ 9071.406348] calling  rtc0+ @ 21729
[ 9071.406378] call rtc0+ returned 0 after 25 usecs
[ 9071.416162] r8169 0000:04:00.0: eth3: link down
[ 9071.420028] call 0000:00:14.5+ returned 0 after 22116 usecs
[ 9071.420035] calling  usb7+ @ 22130
[ 9071.420048] call 0000:00:12.0+ returned 0 after 22458 usecs
[ 9071.420056] calling  usb3+ @ 22105
[ 9071.420082] call 0000:00:13.1+ returned 0 after 22369 usecs
[ 9071.420088] calling  usb6+ @ 22126
[ 9071.420099] call 0000:00:13.0+ returned 0 after 22416 usecs
[ 9071.420122] call 0000:00:13.2+ returned 0 after 22406 usecs
[ 9071.420127] calling  usb5+ @ 22108
[ 9071.420136] calling  usb2+ @ 22101
[ 9071.420152] call 0000:00:12.1+ returned 0 after 22524 usecs
[ 9071.420158] calling  usb4+ @ 22113
[ 9071.420177] call 0000:00:12.2+ returned 0 after 22521 usecs
[ 9071.420182] calling  usb1+ @ 22107
[ 9071.426701] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 9071.426878] radeon 0000:01:05.0: WB enabled
[ 9071.448044] call usb2+ returned 0 after 27250 usecs
[ 9071.457811] [drm] ring test succeeded in 1 usecs
[ 9071.457825] [drm] ib test succeeded in 0 usecs
[ 9071.457845] [drm:drm_crtc_helper_set_config], 
[ 9071.457847] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9071.457856] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9071.457861] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9071.457864] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9071.457867] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9071.457870] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9071.457873] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9071.457884] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9071.457890] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9071.457894] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9071.457911] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9071.457929] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9071.472044] call usb1+ returned 0 after 50641 usecs
[ 9071.472072] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 9071.480057] [drm:avivo_crtc_load_lut], 0
[ 9071.480069] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9071.480084] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9071.480087] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:DVI-D-1] set DPMS on
[ 9071.480091] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9071.480097] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9071.500044] call usb7+ returned 0 after 78130 usecs
[ 9071.500070] call usb3+ returned 0 after 78135 usecs
[ 9071.500090] call usb4+ returned 0 after 78055 usecs
[ 9071.500106] calling  4-1+ @ 22142
[ 9071.500130] call usb5+ returned 0 after 78124 usecs
[ 9071.500158] call usb6+ returned 0 after 78190 usecs
[ 9071.500182] calling  3-3+ @ 22134
[ 9071.512584] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9071.512590] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000000
[ 9071.512607] call 0000:01:05.0+ returned 0 after 112487 usecs
[ 9071.549114] call 3-3+ returned 0 after 47780 usecs
[ 9071.551106] call 4-1+ returned 0 after 49800 usecs
[ 9071.568502] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 9071.568506] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 9071.568510] ata2.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 9071.576499] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 9071.576503] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 9071.576507] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9071.584432] ata2.00: configured for UDMA/33
[ 9071.600430] ata2.01: configured for UDMA/33
[ 9071.716043] ata8: SATA link down (SStatus 0 SControl 300)
[ 9071.716074] ata5: SATA link down (SStatus 0 SControl 300)
[ 9071.716110] ata6: SATA link down (SStatus 0 SControl 300)
[ 9071.716142] ata7: SATA link down (SStatus 0 SControl 300)
[ 9071.972025] ata3: softreset failed (device not ready)
[ 9071.972029] ata3: applying PMP SRST workaround and retrying
[ 9072.144038] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9072.144736] ata3.00: configured for UDMA/100
[ 9072.160226] call 2:0:0:0+ returned 0 after 743810 usecs
[ 9073.152542] r8169 0000:04:00.0: eth3: link up
[ 9081.408027] ata4: softreset failed (device not ready)
[ 9085.092047] ata4: softreset failed (device not ready)
[ 9085.092050] ata4: applying PMP SRST workaround and retrying
[ 9085.264029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9085.276328] ata4.00: configured for UDMA/100
[ 9085.325636] call 3:0:0:0+ returned 0 after 13600589 usecs
[ 9085.325661] calling  input0+ @ 21729
[ 9085.325667] call input0+ returned 0 after 2 usecs
[ 9085.325678] calling  input1+ @ 21729
[ 9085.325716] call input1+ returned 0 after 33 usecs
[ 9085.325721] calling  input2+ @ 21729
[ 9085.325738] call input2+ returned 0 after 13 usecs
[ 9085.325757] calling  input3+ @ 21729
[ 9085.325774] call input3+ returned 0 after 13 usecs
[ 9085.325777] calling  input4+ @ 21729
[ 9085.325793] call input4+ returned 0 after 12 usecs
[ 9085.325805] calling  ttm+ @ 21729
[ 9085.325810] call ttm+ returned 0 after 1 usecs
[ 9085.325814] calling  SP5100 TCO timer+ @ 21729
[ 9085.325819] call SP5100 TCO timer+ returned 0 after 1 usecs
[ 9085.325822] calling  controlD64+ @ 21729
[ 9085.325827] call controlD64+ returned 0 after 1 usecs
[ 9085.325830] calling  card0+ @ 21729
[ 9085.325835] call card0+ returned 0 after 1 usecs
[ 9085.325838] calling  i2c-0+ @ 21729
[ 9085.325843] call i2c-0+ returned 0 after 1 usecs
[ 9085.325846] calling  i2c-1+ @ 21729
[ 9085.325851] call i2c-1+ returned 0 after 1 usecs
[ 9085.325853] calling  i2c-2+ @ 21729
[ 9085.325858] call i2c-2+ returned 0 after 1 usecs
[ 9085.325861] calling  i2c-3+ @ 21729
[ 9085.325865] call i2c-3+ returned 0 after 1 usecs
[ 9085.325868] calling  i2c-4+ @ 21729
[ 9085.325873] call i2c-4+ returned 0 after 1 usecs
[ 9085.325876] calling  card0-VGA-1+ @ 21729
[ 9085.325881] call card0-VGA-1+ returned 0 after 1 usecs
[ 9085.325884] calling  card0-DVI-D-1+ @ 21729
[ 9085.325888] call card0-DVI-D-1+ returned 0 after 1 usecs
[ 9085.325910] calling  w83627ehf.656+ @ 21729
[ 9085.325915] call w83627ehf.656+ returned 0 after 1 usecs
[ 9085.325930] PM: resume of devices complete after 13928.968 msecs
[ 9085.326530] PM: Finishing wakeup.
[ 9085.326532] Restarting tasks ... done.
[ 9085.414092] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9085.414127] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9085.414133] [drm:drm_crtc_helper_set_config], 
[ 9085.414137] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9085.414160] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9085.414169] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9085.414173] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9085.414178] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9085.414183] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9085.414188] [drm:drm_mode_debug_printmodeline], Modeline 16:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 9085.414203] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9085.414218] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9085.414228] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9085.414288] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9085.414364] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9085.428082] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:16:]
[ 9085.436072] [drm:avivo_crtc_load_lut], 0
[ 9085.436088] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9085.436103] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9085.436107] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:DVI-D-1] set DPMS on
[ 9085.436111] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9085.436117] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9085.452975] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9085.452980] [drm:drm_crtc_helper_set_config], 
[ 9085.452984] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9085.452989] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9085.452997] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000000
[ 9085.453050] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9085.453057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9085.468351] [drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000001
[ 9085.468361] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9085.468367] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9085.468382] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9085.468385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9085.480354] [drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000001
[ 9085.480368] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9085.480374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9085.480411] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9085.480415] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9085.538719] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9085.538761] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9085.538766] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9085.538772] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9085.538777] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9085.538783] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9085.538789] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9085.538794] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9085.538800] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9085.538806] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9085.538812] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9085.538817] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9085.538823] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9085.538828] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9085.538834] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9085.538840] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9085.538846] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9085.538851] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9085.538856] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9085.538877] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9205.408325] [drm:drm_crtc_helper_set_config], 
[ 9205.408334] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.408355] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9205.408364] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9205.408371] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9205.408378] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.408387] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9205.408394] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9205.408416] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9205.408431] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9205.408440] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9205.408474] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9205.408508] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9205.424088] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 9205.432051] [drm:avivo_crtc_load_lut], 0
[ 9205.432073] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9205.432092] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9205.432099] [drm:drm_crtc_helper_set_config], 	[CONNECTOR:15:DVI-D-1] set DPMS on
[ 9205.432106] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9205.432129] [drm:avivo_crtc_load_lut], 0
[ 9205.432149] [drm:avivo_crtc_load_lut], 0
[ 9205.451088] [drm:drm_crtc_helper_set_config], 
[ 9205.451093] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.451111] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.451119] [drm:drm_crtc_helper_set_config], 
[ 9205.451124] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9205.451131] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9205.451152] [drm:drm_crtc_helper_set_config], 
[ 9205.451157] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.451171] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.451191] [drm:drm_crtc_helper_set_config], 
[ 9205.451196] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.451211] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.451220] [drm:avivo_crtc_load_lut], 0
[ 9205.451240] [drm:avivo_crtc_load_lut], 0
[ 9205.470214] [drm:avivo_crtc_load_lut], 0
[ 9214.208964] [drm:avivo_crtc_load_lut], 0
[ 9214.209010] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9214.209032] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9214.209041] [drm:drm_crtc_helper_set_config], 
[ 9214.209048] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9214.209092] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9214.209156] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9214.209163] [drm:drm_crtc_helper_set_config], 
[ 9214.209168] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9214.209183] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9214.209356] [drm:avivo_crtc_load_lut], 0
[ 9214.209407] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9214.209418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9214.224373] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9214.224392] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9214.224403] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9214.224430] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9214.224438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9214.236369] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9214.236380] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9214.236388] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9214.236438] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9214.236447] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9214.293990] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9214.294077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9214.294088] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9214.294103] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9214.294117] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9214.294131] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9214.294145] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9214.294159] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9214.294174] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9214.294188] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9214.294202] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9214.294216] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9214.294230] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9214.294244] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9214.294258] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9214.294272] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9214.294286] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9214.294300] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9214.294314] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9214.294337] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9226.428515] [drm:drm_crtc_helper_set_config], 
[ 9226.428524] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9226.428550] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9226.428570] [drm:drm_crtc_helper_set_config], 
[ 9226.428576] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9226.428585] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9226.428620] [drm:drm_crtc_helper_set_config], 
[ 9226.428625] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9226.428640] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9226.428664] [drm:drm_crtc_helper_set_config], 
[ 9226.428669] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9226.428684] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9226.428694] [drm:avivo_crtc_load_lut], 0
[ 9226.428716] [drm:avivo_crtc_load_lut], 0
[ 9226.447681] [drm:avivo_crtc_load_lut], 0
[ 9227.242045] [drm:avivo_crtc_load_lut], 0
[ 9227.242089] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9227.242111] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9227.242119] [drm:drm_crtc_helper_set_config], 
[ 9227.242126] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9227.242168] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9227.242229] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9227.242235] [drm:drm_crtc_helper_set_config], 
[ 9227.242240] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9227.242255] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9227.242432] [drm:avivo_crtc_load_lut], 0
[ 9227.242477] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9227.242490] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9227.260363] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9227.260384] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9227.260397] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9227.260426] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9227.260434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9227.272342] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9227.272353] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9227.272361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9227.272405] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9227.272414] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9227.329778] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9227.329867] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9227.329877] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9227.329892] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9227.329907] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9227.329921] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9227.329935] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9227.329950] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9227.329965] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9227.329979] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9227.329993] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9227.330007] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9227.330022] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9227.330036] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9227.330050] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9227.330063] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9227.330078] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9227.330091] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9227.330105] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9227.330129] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9228.100611] [drm:drm_crtc_helper_set_config], 
[ 9228.100619] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9228.100646] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9228.100670] [drm:drm_crtc_helper_set_config], 
[ 9228.100676] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9228.100684] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9228.100720] [drm:drm_crtc_helper_set_config], 
[ 9228.100725] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9228.100740] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9228.100766] [drm:drm_crtc_helper_set_config], 
[ 9228.100771] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9228.100787] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9228.100797] [drm:avivo_crtc_load_lut], 0
[ 9228.100816] [drm:avivo_crtc_load_lut], 0
[ 9228.119796] [drm:avivo_crtc_load_lut], 0
[ 9229.074543] [drm:avivo_crtc_load_lut], 0
[ 9229.074592] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9229.074619] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9229.074631] [drm:drm_crtc_helper_set_config], 
[ 9229.074639] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9229.074683] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9229.074750] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9229.074757] [drm:drm_crtc_helper_set_config], 
[ 9229.074763] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9229.074776] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9229.074971] [drm:avivo_crtc_load_lut], 0
[ 9229.075018] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9229.075030] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9229.088385] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9229.088404] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9229.088417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9229.088443] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9229.088451] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9229.100397] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9229.100410] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9229.100419] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9229.100469] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9229.100478] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9229.161909] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9229.162005] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9229.162015] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9229.162031] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9229.162045] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9229.162059] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9229.162073] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9229.162087] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9229.162101] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9229.162115] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9229.162128] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9229.162142] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9229.162156] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9229.162170] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9229.162184] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9229.162198] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9229.162211] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9229.162225] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9229.162238] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9229.162279] [drm:drm_mode_getconnector], [CONNECTOR:15:?]

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux