On Mon, Jun 01, 2020 at 02:09:35PM +0800, Liu Ying wrote: > This patch set adds a KOE WUXGA 10.1" LVDS panel support. > The panel type is TX26D202VM0BWA. > The panel has dual LVDS channels. > > My panel is manufactured by US Micro Products(USMP). There is a tag at > the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' > and it's made by KOE in Taiwan. > > The panel spec from USMP can be found at: > https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192120NDU-A0.pdf > > The below panel spec from KOE is basically the same to the one from USMP. > However, the panel type 'TX26D202VM0BAA' is a little bit different. > It looks that the two types of panel are compatible with each other. > http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf > > Patch 1/2 adds compatible for the panel in the panel-simple DT binding doc. > Patch 2/2 adds the panel support in the DRM panel-simple driver. Thanks, both patches applied to drm-misc-next. Sam > > Liu Ying (2): > dt-bindings: panel-simple: Add koe,tx26d202vm0bwa compatible > drm/panel: simple: Add support for KOE TX26D202VM0BWA panel > > .../bindings/display/panel/panel-simple.yaml | 2 ++ > drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++ > 2 files changed, 36 insertions(+) > > -- > 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
