On Wed, Jun 03, 2020 at 03:20:41PM -0400, Jim Quinlan wrote:
> @@ -786,7 +787,7 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
> const struct sun4i_backend_quirks *quirks;
> struct resource *res;
> void __iomem *regs;
> - int i, ret;
> + int i, ret = 0;
No need for this.
>
> backend = devm_kzalloc(dev, sizeof(*backend), GFP_KERNEL);
> if (!backend)
> @@ -812,7 +813,9 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
> * on our device since the RAM mapping is at 0 for the DMA bus,
> * unlike the CPU.
> */
> - drm->dev->dma_pfn_offset = PHYS_PFN_OFFSET;
> + ret = attach_uniform_dma_pfn_offset(dev, PHYS_PFN_OFFSET);
> + if (ret)
> + return ret;
> }
>
> backend->engine.node = dev->of_node;
> diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
> index 04fbd4bf0ff9..e9cc1c2d47cd 100644
> --- a/drivers/iommu/io-pgtable-arm.c
> +++ b/drivers/iommu/io-pgtable-arm.c
> @@ -754,7 +754,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg)
> if (cfg->oas > ARM_LPAE_MAX_ADDR_BITS)
> return NULL;
>
> - if (!selftest_running && cfg->iommu_dev->dma_pfn_offset) {
> + if (!selftest_running && cfg->iommu_dev->dma_pfn_offset_map) {
> dev_err(cfg->iommu_dev, "Cannot accommodate DMA offset for IOMMU page tables\n");
> return NULL;
> }
> diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> index eff34ded6305..7212da5e1076 100644
> --- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> +++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> @@ -7,6 +7,7 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> #include <linux/interrupt.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> @@ -183,7 +184,9 @@ static int sun4i_csi_probe(struct platform_device *pdev)
> return ret;
> } else {
> #ifdef PHYS_PFN_OFFSET
> - csi->dev->dma_pfn_offset = PHYS_PFN_OFFSET;
> + ret = attach_uniform_dma_pfn_offset(dev, PHYS_PFN_OFFSET);
> + if (ret)
> + return ret;
> #endif
> }
>
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> index 055eb0b8e396..2d66d415b6c3 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> @@ -898,7 +898,10 @@ static int sun6i_csi_probe(struct platform_device *pdev)
>
> sdev->dev = &pdev->dev;
> /* The DMA bus has the memory mapped at 0 */
> - sdev->dev->dma_pfn_offset = PHYS_OFFSET >> PAGE_SHIFT;
> + ret = attach_uniform_dma_pfn_offset(sdev->dev,
> + PHYS_OFFSET >> PAGE_SHIFT);
> + if (ret)
> + return ret;
>
> ret = sun6i_csi_resource_request(sdev, pdev);
> if (ret)
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 96d8cfb14a60..c89333b0a5fb 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -918,6 +918,70 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
> }
> EXPORT_SYMBOL(of_io_request_and_map);
>
> +static int attach_dma_pfn_offset_map(struct device *dev,
> + struct device_node *node, int num_ranges)
> +{
> + struct of_range_parser parser;
> + struct of_range range;
> + struct dma_pfn_offset_region *r;
> +
> + r = devm_kcalloc(dev, num_ranges + 1,
> + sizeof(struct dma_pfn_offset_region), GFP_KERNEL);
> + if (!r)
> + return -ENOMEM;
> + dev->dma_pfn_offset_map = r;
> + of_dma_range_parser_init(&parser, node);
> +
> + /*
> + * Record all info for DMA ranges array. We could
> + * just use the of_range struct, but if we did that it
> + * would require more calculations for phys_to_dma and
> + * dma_to_phys conversions.
> + */
> + for_each_of_range(&parser, &range) {
> + r->cpu_start = range.cpu_addr;
> + r->cpu_end = r->cpu_start + range.size - 1;
> + r->dma_start = range.bus_addr;
> + r->dma_end = r->dma_start + range.size - 1;
> + r->pfn_offset = PFN_DOWN(range.cpu_addr)
> + - PFN_DOWN(range.bus_addr);
> + r++;
> + }
> + return 0;
> +}
> +
> +
> +
> +/**
> + * attach_dma_pfn_offset - Assign scalar offset for all addresses.
> + * @dev: device pointer; only needed for a corner case.
> + * @dma_pfn_offset: offset to apply when converting from phys addr
^^^^^^^^^^^^^^^
This parameter name does not match.
> + * to dma addr and vice versa.
> + *
> + * It returns -ENOMEM if out of memory, otherwise 0.
It can also return -ENODEV. Why are we passing NULL dev pointers to
all these functions anyway?
> + */
> +int attach_uniform_dma_pfn_offset(struct device *dev, unsigned long pfn_offset)
> +{
> + struct dma_pfn_offset_region *r;
> +
> + if (!dev)
> + return -ENODEV;
> +
> + if (!pfn_offset)
> + return 0;
> +
> + r = devm_kcalloc(dev, 1, sizeof(struct dma_pfn_offset_region),
> + GFP_KERNEL);
Use: r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
> + if (!r)
> + return -ENOMEM;
> +
> + r->uniform_offset = true;
> + r->pfn_offset = pfn_offset;
> +
> + return 0;
> +}
This function doesn't seem to do anything useful. Is part of it
missing?
> +EXPORT_SYMBOL_GPL(attach_uniform_dma_pfn_offset);
> +
regards,
dan carpenter
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
