[PATCH 1/3] drm/i915/dp_mst: Fix disabling MST on a port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently MST on a port can get enabled/disabled from the hotplug work
and get disabled from the short pulse work in a racy way. Fix this by
relying on the MST state checking in the hotplug work and just schedule
a hotplug work from the short pulse handler if some problem happened
during the MST interrupt handling.

This removes the explicit MST disabling in case of an AUX failure, but
if AUX fails, then probably the detection will also fail during the
scheduled hotplug work and it's not guaranteed that we'll see
intermittent errors anyway.

While at it also simplify the error checking of the MST interrupt
handler.

Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 33 +++----------------------
 1 file changed, 4 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 55fda074c0ad..befbcacddaa1 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5604,7 +5604,7 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp)
 		}
 	}
 
-	return need_retrain;
+	return need_retrain ? -EINVAL : 0;
 }
 
 static bool
@@ -7255,35 +7255,10 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
 	}
 
 	if (intel_dp->is_mst) {
-		switch (intel_dp_check_mst_status(intel_dp)) {
-		case -EINVAL:
-			/*
-			 * If we were in MST mode, and device is not
-			 * there, get out of MST mode
-			 */
-			drm_dbg_kms(&i915->drm,
-				    "MST device may have disappeared %d vs %d\n",
-				    intel_dp->is_mst,
-				    intel_dp->mst_mgr.mst_state);
-			intel_dp->is_mst = false;
-			drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
-							intel_dp->is_mst);
-
-			return IRQ_NONE;
-		case 1:
-			return IRQ_NONE;
-		default:
-			break;
-		}
-	}
-
-	if (!intel_dp->is_mst) {
-		bool handled;
-
-		handled = intel_dp_short_pulse(intel_dp);
-
-		if (!handled)
+		if (intel_dp_check_mst_status(intel_dp) < 0)
 			return IRQ_NONE;
+	} else if (!intel_dp_short_pulse(intel_dp)) {
+		return IRQ_NONE;
 	}
 
 	return IRQ_HANDLED;
-- 
2.23.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux