On Tue, 2 Jun 2020 at 21:57, Sam Ravnborg <sam@xxxxxxxxxxxx> wrote: > > Hi Emil. > > On Tue, Jun 02, 2020 at 01:46:19PM +0100, Emil Velikov wrote: > > On Tue, 2 Jun 2020 at 08:17, Liu Ying <victor.liu@xxxxxxx> wrote: > > > > > > This patch adds support for Kaohsiung Opto-Electronics Inc. > > > 10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface. > > > The panel has dual LVDS channels. > > > > > > My panel is manufactured by US Micro Products(USMP). There is a tag at > > > the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' > > > and it's made by KOE in Taiwan. > > > > > > The panel spec from USMP can be found at: > > > https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192120NDU-A0.pdf > > > > > > The below panel spec from KOE is basically the same to the one from USMP. > > > However, the panel type 'TX26D202VM0BAA' is a little bit different. > > > It looks that the two types of panel are compatible with each other. > > > http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf > > > > > > Cc: Thierry Reding <thierry.reding@xxxxxxxxx> > > > Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> > > > Signed-off-by: Liu Ying <victor.liu@xxxxxxx> > > > --- > > > drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++ > > > 1 file changed, 34 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > > > index b6ecd15..7c222ec 100644 > > > --- a/drivers/gpu/drm/panel/panel-simple.c > > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > > @@ -2200,6 +2200,37 @@ static const struct panel_desc koe_tx14d24vm1bpa = { > > > }, > > > }; > > > > > > +static const struct display_timing koe_tx26d202vm0bwa_timing = { > > > + .pixelclock = { 151820000, 156720000, 159780000 }, > > > + .hactive = { 1920, 1920, 1920 }, > > > + .hfront_porch = { 105, 130, 142 }, > > > + .hback_porch = { 45, 70, 82 }, > > > + .hsync_len = { 30, 30, 30 }, > > > + .vactive = { 1200, 1200, 1200}, > > > + .vfront_porch = { 3, 5, 10 }, > > > + .vback_porch = { 2, 5, 10 }, > > > + .vsync_len = { 5, 5, 5 }, > > > +}; > > > + > > > +static const struct panel_desc koe_tx26d202vm0bwa = { > > > + .timings = &koe_tx26d202vm0bwa_timing, > > > + .num_timings = 1, > > > + .bpc = 8, > > > + .size = { > > > + .width = 217, > > > + .height = 136, > > > + }, > > > + .delay = { > > > + .prepare = 1000, > > > + .enable = 1000, > > > + .unprepare = 1000, > > > + .disable = 1000, > > Ouch 1s for each delay is huge. Nevertheless it matches the specs so, > > the series is: > > Reviewed-by: Emil Velikov <emil.l.velikov@xxxxxxxxx> > > > > Sam, Thierry I assume you'll merge the series. Let me know if I should > > pick it up. > I am quite busy with non-linux stuff these days so fine if you can pick > them up. I like that simple panel patches are processed fast. > > I expect to have some hours for linux work friday or saturday, but no > promises... > Don't worry - once the DT maintainers ack 1/2, I'll merge the series. -Emil _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
