The mxsfb_reset_block() function isn't special, pass it the mxsfb_drm_private pointer instead of a pointer to the base address. Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Stefan Agner <stefan@xxxxxxxx> --- drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c index 8b6339316929..be60c4021e2f 100644 --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c @@ -166,21 +166,21 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) return readl_poll_timeout(addr, reg, !(reg & mask), 0, RESET_TIMEOUT); } -static int mxsfb_reset_block(void __iomem *reset_addr) +static int mxsfb_reset_block(struct mxsfb_drm_private *mxsfb) { int ret; - ret = clear_poll_bit(reset_addr, MODULE_SFTRST); + ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST); if (ret) return ret; - writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR); + writel(MODULE_CLKGATE, mxsfb->base + MXS_CLR_ADDR); - ret = clear_poll_bit(reset_addr, MODULE_SFTRST); + ret = clear_poll_bit(mxsfb->base, MODULE_SFTRST); if (ret) return ret; - return clear_poll_bit(reset_addr, MODULE_CLKGATE); + return clear_poll_bit(mxsfb->base, MODULE_CLKGATE); } static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb) @@ -213,7 +213,7 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb) */ /* Mandatory eLCDIF reset as per the Reference Manual */ - err = mxsfb_reset_block(mxsfb->base); + err = mxsfb_reset_block(mxsfb); if (err) return; -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel