In order to avoid pixels getting stuck in the (unflushable) FIFO between the HVS and the PV, we need to add some delay after disabling the PV output and before disabling the HDMI controller. 20ms seems to be good enough so let's use that. Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_crtc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index b3721bce7c81..dee8dc7b9409 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -401,6 +401,8 @@ static void vc4_crtc_atomic_disable(struct drm_crtc *crtc, ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1); WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n"); + mdelay(20); + if (vc4_encoder->post_crtc_disable) vc4_encoder->post_crtc_disable(encoder); -- git-series 0.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
