From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
The register range used for audio setup in the previous generations of
SoC were always the second range in the device tree. However, now that
the BCM2711 has way more register ranges, it makes sense to retrieve it
by names for it, while preserving the id-based lookup as a fallback.
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c069bf8e6d7c..ebe9dd25c65a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -953,6 +953,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
struct snd_soc_card *card = &vc4_hdmi->audio.card;
struct device *dev = &vc4_hdmi->pdev->dev;
const __be32 *addr;
+ int index;
int ret;
if (!of_find_property(dev->of_node, "dmas", NULL)) {
@@ -973,7 +974,13 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *vc4_hdmi)
* for DMA transfers.
* This VC/MMU should probably be exposed to avoid this kind of hacks.
*/
- addr = of_get_address(dev->of_node, 1, NULL, NULL);
+ index = of_property_match_string(dev->of_node, "reg-names", "hd");
+ /* Before BCM2711, we don't have a named register range */
+ if (index < 0)
+ index = 1;
+
+ addr = of_get_address(dev->of_node, index, NULL, NULL);
+
vc4_hdmi->audio.dma_data.addr = be32_to_cpup(addr) + mai_data->offset;
vc4_hdmi->audio.dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
vc4_hdmi->audio.dma_data.maxburst = 2;
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
