Hi, Jitao:
Jitao Shi <jitao.shi@xxxxxxxxxxxx> 於 2020年5月22日 週五 下午6:12寫道：
>
> If panel has too small hfp or hbp, horizontal_frontporch_byte or
> horizontal_backporch_byte may become very small value or negative
> value. This patch adjusts their values so that they are greater
> than minimum value and keep total of them unchanged.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 0ede69830a9d..aebaafd90ceb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -148,6 +148,9 @@
> (type == MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM) || \
> (type == MIPI_DSI_DCS_READ))
>
> +#define MIN_HFP_BYTE 0x02
> +#define MIN_HBP_BYTE 0x02
> +
> struct mtk_phy_timing {
> u32 lpx;
> u32 da_hs_prepare;
> @@ -450,6 +453,7 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> u32 horizontal_sync_active_byte;
> u32 horizontal_backporch_byte;
> u32 horizontal_frontporch_byte;
> + s32 signed_hfp_byte, signed_hbp_byte;
> u32 dsi_tmp_buf_bpp, data_phy_cycles;
> struct mtk_phy_timing *timing = &dsi->phy_timing;
>
> @@ -519,6 +523,20 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> }
> }
>
> + signed_hfp_byte = (s32)horizontal_frontporch_byte;
> + signed_hbp_byte = (s32)horizontal_backporch_byte;
> +
> + if (signed_hfp_byte + signed_hbp_byte < MIN_HFP_BYTE + MIN_HBP_BYTE) {
> + DRM_WARN("Calculated hfp_byte and hbp_byte are too small, "
> + "panel may not work properly.\n");
> + } else if (signed_hfp_byte < MIN_HFP_BYTE) {
> + horizontal_frontporch_byte = MIN_HFP_BYTE;
> + horizontal_backporch_byte -= MIN_HFP_BYTE - signed_hfp_byte;
> + } else if (signed_hbp_byte < MIN_HBP_BYTE) {
> + horizontal_frontporch_byte -= MIN_HBP_BYTE - signed_hbp_byte;
> + horizontal_backporch_byte = MIN_HBP_BYTE;
> + }
> +
I think horizontal_frontporch_byte would never be negtive, and
horizontal_backporch_byte would be negtive when
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
horizontal_backporch_byte =
(vm->hback_porch * dsi_tmp_buf_bpp - 10);
else
horizontal_backporch_byte = ((vm->hback_porch + vm->hsync_len) *
dsi_tmp_buf_bpp - 10);
If this time it's negtive, the calculation of
horizontal_frontporch_byte is so strange.
I think processing negtive value should before here.
Regards,
Chun-Kuang.
> writel(horizontal_sync_active_byte, dsi->regs + DSI_HSA_WC);
> writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
> writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
> --
> 2.25.1
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
