Hi Tony, > Am 03.05.2020 um 17:01 schrieb Tony Lindgren <tony@xxxxxxxxxxx>: > > * Paul Cercueil <paul@xxxxxxxxxxxxxxx> [200503 14:19]: >> You have a new SoC with a SGX, and you only need to enable one clock to get >> it to work. So you create a devicetree node which receives only one clock. >> >> Turns out, that the bootloader was enabling the other 3 clocks, and since >> the last release, it doesn't anymore. You're left with having to support a >> broken devicetree. >> >> That's the kind of problem that can be easily avoided by enforcing the >> number of clocks that have to be provided. > > The number of clocks depends on how it's wired for the SoC. > > On omaps, there's are no controls for additinoal SGX clocks. Sure some > of the clocks may be routed to multple places internally by the wrapper > module. But we have no control over that. > > If we wanted to specify just the "fck" clock on omaps, then we can > do it with something like this: > > allOf: > - if: > properites: > compatible: > enum: > - "ti,omap4-sgx544-112" > - "ti,omap5-sgx544-116" > - "ti,dra7-sgx544-116" > then: > properties: > clocks: > minItems: 1 > maxItems: 1 > > clock-names: > const: fck > > required: > - clocks > - clock-names will add to v8 of this series as a separate patch on top of the general one. This should make it easier to have a focussed discussion and revert/bisect if something goes wrong. BR and thanks, Nikolaus _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
