Add a node for the Northwestlogic MIPI DSI IP core, "disabled" by
default.
Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 31 +++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 0142f06ead12..6bbbf44e6be0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -889,6 +889,37 @@ sec_jr2: jr@3000 {
};
};
+ mipi_dsi: mipi-dsi@30a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mq-nwl-dsi";
+ reg = <0x30a00000 0x300>;
+ clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+ <&clk IMX8MQ_CLK_DSI_AHB>,
+ <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+ <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+ <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+ clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+ assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
+ <&clk IMX8MQ_CLK_DSI_CORE>,
+ <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
+ <&clk IMX8MQ_SYS1_PLL_266M>;
+ assigned-clock-rates = <80000000>,
+ <266000000>,
+ <20000000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+ reset-names = "byte", "dpi", "esc", "pclk";
+ phys = <&dphy>;
+ phy-names = "dphy";
+ power-domains = <&pgc_mipi>;
+ status = "disabled";
+ };
+
dphy: dphy@30a00300 {
compatible = "fsl,imx8mq-mipi-dphy";
reg = <0x30a00300 0x100>;
--
2.26.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
