Hi, A while back I had the idea to turn a Raspberry Pi Zero into a $5 USB to HDMI/SDTV/DSI/DPI display adapter. This series adds a USB host driver and a device/gadget driver to achieve that. The reason for calling it 'Generic' is so anyone can make a USB display/adapter against this driver, all that's needed is to add a USB vid:pid. I was hoping to have someone working on a microcontroller based USB display by now, but unfortunately that has been delayed. It would have been nice to have a microcontroller implementation to ensure that I haven't made things unnecessary difficult to implement. Performance The one thing that decides how useful this all is, is how smooth an experience it gives. My hope was that it should not be noticeably laggy with ordinary office use on 1920x1080@RG16. I'm pleased to see that it's also possible to watch youtube movies, although not in fullscreen. Some of the main factors that affects performance: - Display resolution - Userspace providing damage reports (FB_DAMAGE_CLIPS or DRM_IOCTL_MODE_DIRTYFB) - Color depth (DRM_CAP_DUMB_PREFERRED_DEPTH = 16 if RGB565) - How well the frames compress (lz4) - USB2 vs. USB3 - Gadget device memory bandwidth, CPU power for decompression - (Big endian hosts will have to do byte swapping on the frames) I've tested these: - xorg-server on Pi4. This was nice and smooth since it uses DRM_IOCTL_MODE_DIRTYFB and honours DRM_CAP_DUMB_PREFERRED_DEPTH. - Ubuntu 20.04 GNOME on x86. This was useable, but not so good for movies. GNOME doesn't look at DRM_CAP_DUMB_PREFERRED_DEPTH and doesn't set FB_DAMAGE_CLIPS on the pageflips. I've made a short video to show what it looks like[1]. Tearing Host side Compression and transfer happens in an async worker. There are 2 tearing cases here: 1. The framebuffer fits in the kmalloc'ed transfer buffer, max 4MB by default (KMALLOC_MAX_SIZE). This can give occasional tearing when userspace gets ahead of the worker. 2. The framebuffer doesn't fit in the transfer buffer, so the host splits the transfer. When showing a movie this will almost always give tearing between each part of the frame. Fix: The device can increase KMALLOC_MAX_SIZE by setting CONFIG_FORCE_MAX_ZONEORDER since it probably has a custom kernel anyways. The host distro can't/won't do that, so I have look for solution here. The host side tearing is worse than the device side, because it lasts longer. Device side Received updates are decompressed/copied into the framebuffer that's being scanned out, so tearing is possible. Double buffering/page flipping could be used for full frames, but well behaving userspace doesn't send many of those, so very little impact. Double buffering on all updates would require memcpy between buffers locally, hampering performance. Maybe a Pi4 could get away with it, but a Pi Zero would certainly not (memory bandwidth). I've tested this series with usbip[2] by connecting 2 Pi4's over cabled gigabit network. It worked fine. One use case for these drivers is reusing old tablets and cell phones as USB displays. The Pi4 has two hdmi ports and I was asked if the driver supports that, and I've concluded that it would be too much work to implement at this point. It is possible to extend the protocol and implement it later. I have used a Pi4 as the gadget device during development since it has much better memory bandwith (4000 vs 200 MBps)[3] and CPU than the Pi Zero. They both have the same gadget controller (dwc2). Changes in this version: - Drop drm_backlight_helper - Use devm_drm_dev_alloc() - Addressed Sam's comments Noralf. [1] https://youtu.be/AhGZWwUm8JU [2] tools/usb/usbip/README [3] https://magpi.raspberrypi.org/articles/raspberry-pi-specs-benchmarks Noralf Trønnes (10): backlight: Add backlight_device_get_by_name() drm/client: Add drm_client_init_from_id() drm/client: Add drm_client_framebuffer_flush() drm/client: Add drm_client_modeset_check() drm/client: Add drm_client_modeset_disable() drm/client: Add a way to set modeset, properties and rotation drm/format-helper: Add drm_fb_swab() drm: Add Generic USB Display driver drm/gud: Add functionality for the USB gadget side usb: gadget: function: Add Generic USB Display support .../ABI/testing/configfs-usb-gadget-gud_drm | 10 + MAINTAINERS | 10 + drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/drm_client.c | 81 +- drivers/gpu/drm/drm_client_modeset.c | 192 ++- drivers/gpu/drm/drm_format_helper.c | 61 +- drivers/gpu/drm/drm_mipi_dbi.c | 2 +- drivers/gpu/drm/gud/Kconfig | 20 + drivers/gpu/drm/gud/Makefile | 5 + drivers/gpu/drm/gud/gud_drm_connector.c | 724 ++++++++++ drivers/gpu/drm/gud/gud_drm_drv.c | 641 +++++++++ drivers/gpu/drm/gud/gud_drm_gadget.c | 1165 +++++++++++++++++ drivers/gpu/drm/gud/gud_drm_internal.h | 66 + drivers/gpu/drm/gud/gud_drm_pipe.c | 423 ++++++ drivers/usb/gadget/Kconfig | 12 + drivers/usb/gadget/function/Makefile | 2 + drivers/usb/gadget/function/f_gud_drm.c | 678 ++++++++++ drivers/video/backlight/backlight.c | 21 + include/drm/drm_client.h | 45 +- include/drm/drm_format_helper.h | 4 +- include/drm/gud_drm.h | 377 ++++++ include/linux/backlight.h | 1 + 23 files changed, 4513 insertions(+), 30 deletions(-) create mode 100644 Documentation/ABI/testing/configfs-usb-gadget-gud_drm create mode 100644 drivers/gpu/drm/gud/Kconfig create mode 100644 drivers/gpu/drm/gud/Makefile create mode 100644 drivers/gpu/drm/gud/gud_drm_connector.c create mode 100644 drivers/gpu/drm/gud/gud_drm_drv.c create mode 100644 drivers/gpu/drm/gud/gud_drm_gadget.c create mode 100644 drivers/gpu/drm/gud/gud_drm_internal.h create mode 100644 drivers/gpu/drm/gud/gud_drm_pipe.c create mode 100644 drivers/usb/gadget/function/f_gud_drm.c create mode 100644 include/drm/gud_drm.h -- 2.23.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
