Hi Doug, Thank you for the patch. On Thu, Apr 30, 2020 at 12:46:15PM -0700, Douglas Anderson wrote: > This moves the bindings over, based a lot on toshiba,tc358768.yaml. > Unless there's someone known to be better, I've set the maintainer in > the yaml as the first person to submit bindings. > > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> > --- > > Changes in v4: None > Changes in v3: None > Changes in v2: > - specification => specifier. > - power up => power. > - Added back missing suspend-gpios. > - data-lanes and lane-polarities are are the right place now. > - endpoints don't need to be patternProperties. > - Specified more details for data-lanes and lane-polarities. > - Added old example back in, fixing bugs in it. > - Example i2c bus is just called "i2c", not "i2c1" now. > > .../bindings/display/bridge/ti,sn65dsi86.txt | 87 ------ > .../bindings/display/bridge/ti,sn65dsi86.yaml | 279 ++++++++++++++++++ > 2 files changed, 279 insertions(+), 87 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt > create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt > deleted file mode 100644 > index 8ec4a7f2623a..000000000000 > --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt > +++ /dev/null > @@ -1,87 +0,0 @@ > -SN65DSI86 DSI to eDP bridge chip > --------------------------------- > - > -This is the binding for Texas Instruments SN65DSI86 bridge. > -http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf > - > -Required properties: > -- compatible: Must be "ti,sn65dsi86" > -- reg: i2c address of the chip, 0x2d as per datasheet > -- enable-gpios: gpio specification for bridge_en pin (active high) > - > -- vccio-supply: A 1.8V supply that powers up the digital IOs. > -- vpll-supply: A 1.8V supply that powers up the displayport PLL. > -- vcca-supply: A 1.2V supply that powers up the analog circuits. > -- vcc-supply: A 1.2V supply that powers up the digital core. > - > -Optional properties: > -- interrupts-extended: Specifier for the SN65DSI86 interrupt line. > - > -- gpio-controller: Marks the device has a GPIO controller. > -- #gpio-cells : Should be two. The first cell is the pin number and > - the second cell is used to specify flags. > - See ../../gpio/gpio.txt for more information. > -- #pwm-cells : Should be one. See ../../pwm/pwm.yaml for description of > - the cell formats. > - > -- clock-names: should be "refclk" > -- clocks: Specification for input reference clock. The reference > - clock rate must be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. > - > -- data-lanes: See ../../media/video-interface.txt > -- lane-polarities: See ../../media/video-interface.txt > - > -- suspend-gpios: specification for GPIO1 pin on bridge (active low) > - > -Required nodes: > -This device has two video ports. Their connections are modelled using the > -OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. > - > -- Video port 0 for DSI input > -- Video port 1 for eDP output > - > -Example > -------- > - > -edp-bridge@2d { > - compatible = "ti,sn65dsi86"; > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <0x2d>; > - > - enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; > - suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; > - > - interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; > - > - vccio-supply = <&pm8916_l17>; > - vcca-supply = <&pm8916_l6>; > - vpll-supply = <&pm8916_l17>; > - vcc-supply = <&pm8916_l6>; > - > - clock-names = "refclk"; > - clocks = <&input_refclk>; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - reg = <0>; > - > - edp_bridge_in: endpoint { > - remote-endpoint = <&dsi_out>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - > - edp_bridge_out: endpoint { > - data-lanes = <2 1 3 0>; > - lane-polarities = <0 1 0 1>; > - remote-endpoint = <&edp_panel_in>; > - }; > - }; > - }; > -} > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml > new file mode 100644 > index 000000000000..6d7d40ad45ac > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml > @@ -0,0 +1,279 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SN65DSI86 DSI to eDP bridge chip > + > +maintainers: > + - Sandeep Panda <spanda@xxxxxxxxxxxxxx> > + > +description: | > + The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP. > + http://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf > + > +properties: > + compatible: > + const: ti,sn65dsi86 > + > + reg: > + const: 0x2d > + > + enable-gpios: > + maxItems: 1 > + description: GPIO specifier for bridge_en pin (active high). > + > + suspend-gpios: > + maxItems: 1 > + description: GPIO specifier for GPIO1 pin on bridge (active low). > + > + vccio-supply: > + description: A 1.8V supply that powers the digital IOs. > + > + vpll-supply: > + description: A 1.8V supply that powers the DisplayPort PLL. > + > + vcca-supply: > + description: A 1.2V supply that powers the analog circuits. > + > + vcc-supply: > + description: A 1.2V supply that powers the digital core. > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: > + Clock specifier for input reference clock. The reference clock rate must > + be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz. > + > + clock-names: > + const: refclk > + > + gpio-controller: true > + '#gpio-cells': > + const: 2 > + description: > + First cell is pin number, second cell is flags. GPIO pin numbers are > + 1-based to match the datasheet. See ../../gpio/gpio.txt for more > + information. > + > + '#pwm-cells': > + const: 1 > + description: See ../../pwm/pwm.yaml for description of the cell formats. > + > + ports: > + type: object Maybe additionalProperties: false here ? > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + port@0: > + type: object > + additionalProperties: false > + > + description: > + Video port for MIPI DSI input > + > + properties: > + reg: > + const: 0 > + > + endpoint: > + type: object > + additionalProperties: false > + > + properties: > + remote-endpoint: true > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + items: > + enum: > + - 0 > + - 1 > + - 2 > + - 3 > + description: See ../../media/video-interface.txt And maybe uniqueItems: true ? Same for port@1. Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > + > + lane-polarities: > + minItems: 1 > + maxItems: 4 > + items: > + enum: > + - 0 > + - 1 > + description: See ../../media/video-interface.txt > + > + dependencies: > + data-lanes: [lane-polarities] > + > + required: > + - reg > + > + port@1: > + type: object > + additionalProperties: false > + > + description: > + Video port for eDP output (panel or connector). > + > + properties: > + reg: > + const: 1 > + > + endpoint: > + type: object > + additionalProperties: false > + > + properties: > + remote-endpoint: true > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + items: > + enum: > + - 0 > + - 1 > + - 2 > + - 3 > + description: See ../../media/video-interface.txt > + > + lane-polarities: > + minItems: 1 > + maxItems: 4 > + items: > + enum: > + - 0 > + - 1 > + description: See ../../media/video-interface.txt > + > + dependencies: > + data-lanes: [lane-polarities] > + > + required: > + - reg > + > + required: > + - "#address-cells" > + - "#size-cells" > + - port@0 > + - port@1 > + > +required: > + - compatible > + - reg > + - enable-gpios > + - vccio-supply > + - vpll-supply > + - vcca-supply > + - vcc-supply > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,rpmh.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + bridge@2d { > + compatible = "ti,sn65dsi86"; > + reg = <0x2d>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; > + > + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; > + > + vpll-supply = <&src_pp1800_s4a>; > + vccio-supply = <&src_pp1800_s4a>; > + vcca-supply = <&src_pp1200_l2a>; > + vcc-supply = <&src_pp1200_l2a>; > + > + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; > + clock-names = "refclk"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + endpoint { > + remote-endpoint = <&panel_in_edp>; > + }; > + }; > + }; > + }; > + }; > + - | > + #include <dt-bindings/clock/qcom,rpmh.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + bridge@2d { > + compatible = "ti,sn65dsi86"; > + reg = <0x2d>; > + > + enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>; > + suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>; > + > + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; > + > + vccio-supply = <&pm8916_l17>; > + vcca-supply = <&pm8916_l6>; > + vpll-supply = <&pm8916_l17>; > + vcc-supply = <&pm8916_l6>; > + > + clock-names = "refclk"; > + clocks = <&input_refclk>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + edp_bridge_in: endpoint { > + remote-endpoint = <&dsi_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + edp_bridge_out: endpoint { > + data-lanes = <2 1 3 0>; > + lane-polarities = <0 1 0 1>; > + remote-endpoint = <&edp_panel_in>; > + }; > + }; > + }; > + }; > + }; -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
