RE: [PATCH v7 4/8] drm: imx: Add i.MX 6 MIPI DSI host platform driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daniel Vetter <daniel@xxxxxxxx>
Date: Thu, Apr 30, 2020 at 14:58:41

> On Tue, Apr 28, 2020 at 10:08:04PM +0300, Adrian Ratiu wrote:
> > Hi Daniel,
> > 
> > On Tue, 28 Apr 2020, Daniel Vetter <daniel@xxxxxxxx> wrote:
> > > On Wed, Apr 22, 2020 at 04:07:27AM +0300, Laurent Pinchart wrote:
> > > > Hi Adrian,  On Tue, Apr 21, 2020 at 07:16:06PM +0300, Adrian Ratiu
> > > > wrote: > This adds support for the Synopsis DesignWare MIPI DSI
> > > > v1.01 > host controller which is embedded in i.MX 6 SoCs.   Based on
> > > > > following patches, but updated/extended to work with existing >
> > > > support found in the kernel:  - drm: imx: Support Synopsys >
> > > > DesignWare MIPI DSI host controller >   Signed-off-by: Liu Ying
> > > > <Ying.Liu@xxxxxxxxxxxxx> >  Cc: Fabio Estevam <festevam@xxxxxxxxx>
> > > > Cc: Enric Balletbo > Serra <eballetbo@xxxxxxxxx> Reviewed-by: Emil
> > > > Velikov > <emil.velikov@xxxxxxxxxxxxx> Tested-by: Adrian Pop >
> > > > <pop.adrian61@xxxxxxxxx> Tested-by: Arnaud Ferraris >
> > > > <arnaud.ferraris@xxxxxxxxxxxxx> Signed-off-by: Sjoerd Simons >
> > > > <sjoerd.simons@xxxxxxxxxxxxx> Signed-off-by: Martyn Welch >
> > > > <martyn.welch@xxxxxxxxxxxxx> Signed-off-by: Adrian Ratiu >
> > > > <adrian.ratiu@xxxxxxxxxxxxx> --- Changes since v6: >   - Replaced
> > > > custom noop encoder with the simple drm encoder >   (Enric) - Added
> > > > CONFIG_DRM_IMX6_MIPI_DSI depends on >   CONFIG_OF (Enric) - Dropped
> > > > imx_mipi_dsi_register() because >   now it only creates the dummy
> > > > encoder which can easily be >   done directly in imx_dsi_bind() >
> > > > Changes since v5: >   - Reword to remove unrelated device tree patch
> > > > mention >   (Fabio) - Move pllref_clk enable/disable to bind/unbind
> > > > >   (Ezequiel) - Fix freescale.com -> nxp.com email addresses >
> > > > (Fabio) - Also added myself as module author (Fabio) - Use >
> > > > DRM_DEV_* macros for consistency, print more error msg >  Changes
> > > > since v4: >   - Split off driver-specific configuration of phy
> > > > timings >   due to new upstream API.  - Move regmap infrastructure >
> > > > logic to separate commit (Ezequiel) - Move dsi v1.01 layout >
> > > > addition to a separate commit (Ezequiel) - Minor warnings >   and
> > > > driver name fixes >  Changes since v3: >   - Renamed platform driver
> > > > to reflect it's i.MX6 >   only. (Fabio) >  Changes since v2: >   -
> > > > Fixed commit tags. (Emil) >  Changes since v1: >   - Moved register
> > > > definitions & regmap initialization into >   bridge module. Platform
> > > > drivers get the regmap via >   plat_data after calling the bridge
> > > > probe. (Emil) > --- >  drivers/gpu/drm/imx/Kconfig            |   8
> > > > + >  drivers/gpu/drm/imx/Makefile           |   1 + >
> > > > drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 391 >
> > > > +++++++++++++++++++++++++ 3 files changed, 400 insertions(+) >
> > > > create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c >  diff
> > > > --git a/drivers/gpu/drm/imx/Kconfig > b/drivers/gpu/drm/imx/Kconfig
> > > > index > 207bf7409dfba..0dffc72df7922 100644 --- >
> > > > a/drivers/gpu/drm/imx/Kconfig +++ > b/drivers/gpu/drm/imx/Kconfig @@
> > > > -39,3 +39,11 @@ config > DRM_IMX_HDMI >  	depends on DRM_IMX help
> > > > Choose this if you want to use >  HDMI on i.MX6. > + +config
> > > > DRM_IMX6_MIPI_DSI +	tristate "Freescale i.MX6 > DRM MIPI DSI"
> > > > +	select DRM_DW_MIPI_DSI +	depends on > DRM_IMX +	depends on OF
> > > > +	help +	  Choose this if you want > to use MIPI DSI on i.MX6.  diff
> > > > --git > a/drivers/gpu/drm/imx/Makefile
> > > > b/drivers/gpu/drm/imx/Makefile > index 21cdcc2faabc8..9a7843c593478
> > > > 100644 --- > a/drivers/gpu/drm/imx/Makefile +++ >
> > > > b/drivers/gpu/drm/imx/Makefile @@ -9,3 +9,4 @@ >
> > > > obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o >  obj-$(CONFIG_DRM_IMX_LDB)
> > > > += imx-ldb.o >  obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o >
> > > > +obj-$(CONFIG_DRM_IMX6_MIPI_DSI) += dw_mipi_dsi-imx6.o diff > --git
> > > > a/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c >
> > > > b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c new file mode 100644 >
> > > > index 0000000000000..f8a0a4fe16e21 --- /dev/null +++ >
> > > > b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c @@ -0,0 +1,391 @@ > +//
> > > > SPDX-License-Identifier: GPL-2.0+ +/* + * i.MX6 drm > driver - MIPI
> > > > DSI Host Controller + * + * Copyright (C) > 2011-2015 Freescale
> > > > Semiconductor, Inc.  + * Copyright (C) > 2019-2020 Collabora, Ltd.
> > > > + */ + +#include <linux/clk.h> > +#include <linux/component.h>
> > > > +#include <linux/mfd/syscon.h> > +#include
> > > > <linux/mfd/syscon/imx6q-iomuxc-gpr.h> +#include > <linux/module.h>
> > > > +#include <linux/of_device.h> +#include > <linux/regmap.h> +#include
> > > > <linux/videodev2.h> +#include > <drm/bridge/dw_mipi_dsi.h> +#include
> > > > <drm/drm_crtc_helper.h> > +#include <drm/drm_mipi_dsi.h> +#include
> > > > <drm/drm_of.h> > +#include <drm/drm_print.h> + +#include "imx-drm.h"
> > > > + > +#define DSI_PWR_UP			0x04 +#define > RESET				0 +#define
> > > > POWERUP > BIT(0) + +#define DSI_PHY_IF_CTRL			0x5c > +#define
> > > > PHY_IF_CTRL_RESET		0x0 + +#define > DSI_PHY_TST_CTRL0		0x64 +#define
> > > > PHY_TESTCLK > BIT(1) +#define PHY_UNTESTCLK			0 +#define >
> > > > PHY_TESTCLR			BIT(0) +#define > PHY_UNTESTCLR			0 + +#define >
> > > > DSI_PHY_TST_CTRL1		0x68 +#define PHY_TESTEN > BIT(16) +#define
> > > > PHY_UNTESTEN			0 +#define > PHY_TESTDOUT(n)			(((n) & 0xff) << 8) >
> > > > +#define PHY_TESTDIN(n)			(((n) & 0xff) << > 0) + +struct
> > > > imx_mipi_dsi { +	struct drm_encoder > encoder; +	struct device *dev;
> > > > +	struct regmap *mux_sel; + > struct dw_mipi_dsi *mipi_dsi; +	struct
> > > > clk *pllref_clk; + > +	void __iomem *base; +	unsigned int lane_mbps;
> > > > +}; + > +struct dphy_pll_testdin_map { +	unsigned int max_mbps; + >
> > > > u8 testdin; +}; + +/* The table is based on 27MHz DPHY pll >
> > > > reference clock. */ +static const struct dphy_pll_testdin_map >
> > > > dptdin_map[] = { +	{160, 0x04}, {180, 0x24}, {200, 0x44}, > {210,
> > > > 0x06}, +	{240, 0x26}, {250, 0x46}, {270, 0x08}, > {300, 0x28},
> > > > +	{330, 0x48}, {360, 0x2a}, {400, 0x4a}, > {450, 0x0c}, +	{500,
> > > > 0x2c}, {550, 0x0e}, {600, 0x2e}, > {650, 0x10}, +	{700, 0x30}, {750,
> > > > 0x12}, {800, 0x32}, > {850, 0x14}, +	{900, 0x34}, {950, 0x54},
> > > > {1000, 0x74} +}; > + +static inline struct imx_mipi_dsi
> > > > *enc_to_dsi(struct > drm_encoder *enc) +{ +	return container_of(enc,
> > > > struct > imx_mipi_dsi, encoder); +} + +static void >
> > > > imx_mipi_dsi_set_ipu_di_mux(struct imx_mipi_dsi *dsi, int > ipu_di)
> > > > +{ +	regmap_update_bits(dsi->mux_sel, > IOMUXC_GPR3, + >
> > > > IMX6Q_GPR3_MIPI_MUX_CTL_MASK, +			   ipu_di > <<
> > > > IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT); +} + +static bool >
> > > > imx_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder, >
> > > > +					    const struct > drm_display_mode *mode, + > struct
> > > > drm_display_mode *adj_mode) +{ +	return true; +} + > +static int
> > > > imx_mipi_dsi_encoder_atomic_check(struct > drm_encoder *encoder, + >
> > > > struct drm_crtc_state *crtc_state, + > struct drm_connector_state
> > > > *conn) +{ +	struct > imx_crtc_state *imx_crtc_state = >
> > > > to_imx_crtc_state(crtc_state); + +	/* The following values > are
> > > > taken from dw_hdmi_imx_atomic_check */ + >
> > > > imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB888_1X24; + >
> > > > imx_crtc_state->di_hsync_pin = 2; + > imx_crtc_state->di_vsync_pin =
> > > > 3; + +	return 0; +}  No encoder functions please. This should be a
> > > > bridge driver, the encoder should be created by the i.MX display
> > > > controller driver itself. As that would require quite a bit of
> > > > refactoring I'm OK having an encoder here for the meantime, but it
> > > > should be a dummy one, without any operation.
> > > 
> > > +1 on this, came to say the same. This seems to duplicate the dw-hdmi
> > > design, where the code organization is a bit a mess, with some parts in
> > > drm/bridge, and some parts in each drm_device driver. Plus drm_encoder
> > > in there on top.
> > > 
> > > If we want to continue with the drm_bridge abstraction for these kind of
> > > drivers then imo we need:
> > > 
> > > - to make drm_bridge the actual abstraction, no leaking back&forth
> > > between   the bridge chip and the overall drm_device side of things.
> > > 
> > > - move _all_ dw-mipi-dsi related code into drm/bridge
> > > 
> > > - for the platform specific binding stuff I think drm/bridge/dw-mipi-dsi
> > > directory, which contains the main driver, plus a file each   for the
> > > imx/stm/whatever platform bindings sounds like a   reasonable layout.
> > > 
> > > If that doesn't work, then I think dw-mipi-dsi isn't really a bridge
> > > driver with clear encapsulation, but instead should be structured as a
> > > helper library to implement a drm_encoder. And no drm_bridge.
> > > 
> > > And yes the exact same problem exists with dw-hdmi. That's the reason
> > > why I've started to look into these, it's not really a code pattern we
> > > should repeat imo.
> > 
> > The code structure you propose should be doable and I was actually thinking
> > of something like it when writing the cover letter for v8 of this series,
> > about how to consolidate the Synopsis DW MIPI DSI logic at the same time
> > while consolidating the rest of imx drivers to unify their simple encoder
> > management.
> > 
> > Thank you for fleshing it out! It's very helpful :)
> > 
> > BTW have you seen what I did with the bridge in v8 for the imx6 driver?  [1]
> > 
> > What I'd like to avoid is feature creep in this patch series which is about
> > adding the imx6 driver, because I think moving the logic and refactoring all
> > the drivers is a separate issue and already this series is big and
> > increasing.
> > 
> > So would you be ok with merging the imx6 mipi dsi driver with its
> > dw-mipi-dsi regamp rework and doing the refactoring to consolidate all the
> > bridge logic in a separate patch series which also includes moving the
> > rockchip and stm encoder logic to a drm_bridge?
> > 
> > Or would you like me to do this consolidation rework in advance just for the
> > new imx6 mipi-dsi driver in this series and tackle the rest of drivers in a
> > separate patch series?
> 
> Yeah I think that rework is going to be a lot of work. Generally as long
> as we have agreement about the long-term direction, then I think in-tree
> refactoring leads to best results. So if other bridge people (I've just
> jumped in here) agree, then we're good to go.
> 
> I think best way to document the agreement is to type up a patch for
> Documentation/gpu/todo.rst with the full plan, with some details. And then
> get acks from bridge maintainers. I think Laurent, Sam and Boris
> Brezillion are most active right now with shaping the drm_bridge future.
> 
> Cheers, Daniel
> 

Hi Adrian,

Indeed the driver is getting quite messy, if it goes ahead I 
would be available to help on this driver rework.

I think that also the inclusion of a phy driver could help
in making this driver more clear since most of the code that
each vender has it's phy related.

Thanks,
Angelo

> > 
> > @Laurent, do you also have suggestions how to proceed?
> > 
> > [1] https://urldefense.com/v3/__https://lore.kernel.org/linux-arm-kernel/20200427081952.3536741-1-adrian.ratiu@xxxxxxxxxxxxx/__;!!A4F2R9G_pg!NhBPZGbhUKJY_mrt-2Ft_ja04W8XPqZ8P3-wntQomu30weMxgQfUEXZgnyJXUb7A$ 
> > 
> > Thank you,
> > Adrian
> > 
> > > 
> > > Cheers, Daniel
> > > 
> > > > 
> > > > > +
> > > > > +static void imx_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
> > > > > +{
> > > > > +	struct imx_mipi_dsi *dsi = enc_to_dsi(encoder);
> > > > > +	int mux = drm_of_encoder_active_port_id(dsi->dev->of_node, encoder);
> > > > > +
> > > > > +	imx_mipi_dsi_set_ipu_di_mux(dsi, mux);
> > > > > +}
> > > > > +
> > > > > +static void imx_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> > > > > +{
> > > > > +}
> > > > > +
> > > > > +static const struct drm_encoder_helper_funcs imx_mipi_dsi_encoder_helpers = {
> > > > > +	.mode_fixup = imx_mipi_dsi_encoder_mode_fixup,
> > > > > +	.commit = imx_mipi_dsi_encoder_commit,
> > > > > +	.disable = imx_mipi_dsi_encoder_disable,
> > > > > +	.atomic_check = imx_mipi_dsi_encoder_atomic_check,
> > > > > +};
> > > > > +
> > > > > +static enum drm_mode_status imx_mipi_dsi_mode_valid(void *priv_data,
> > > > > +					const struct drm_display_mode *mode)
> > > > > +{
> > > > > +	/*
> > > > > +	 * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
> > > > > +	 * register is 11-bit.
> > > > > +	 */
> > > > > +	if (mode->hdisplay > 0x7ff)
> > > > > +		return MODE_BAD_HVALUE;
> > > > > +
> > > > > +	/*
> > > > > +	 * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
> > > > > +	 * register is 11-bit.
> > > > > +	 */
> > > > > +	if (mode->vdisplay > 0x7ff)
> > > > > +		return MODE_BAD_VVALUE;
> > > > > +
> > > > > +	return MODE_OK;
> > > > > +}
> > > > > +
> > > > > +
> > > > > +static unsigned int max_mbps_to_testdin(unsigned int max_mbps)
> > > > > +{
> > > > > +	unsigned int i;
> > > > > +
> > > > > +	for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
> > > > > +		if (dptdin_map[i].max_mbps == max_mbps)
> > > > > +			return dptdin_map[i].testdin;
> > > > > +
> > > > > +	return -EINVAL;
> > > > > +}
> > > > > +
> > > > > +static inline void dsi_write(struct imx_mipi_dsi *dsi, u32 reg, u32 val)
> > > > > +{
> > > > > +	writel(val, dsi->base + reg);
> > > > > +}
> > > > > +
> > > > > +static int imx_mipi_dsi_phy_init(void *priv_data)
> > > > > +{
> > > > > +	struct imx_mipi_dsi *dsi = priv_data;
> > > > > +	int testdin;
> > > > > +
> > > > > +	testdin = max_mbps_to_testdin(dsi->lane_mbps);
> > > > > +	if (testdin < 0) {
> > > > > +		DRM_DEV_ERROR(dsi->dev,
> > > > > +			      "failed to get testdin for %dmbps lane clock\n",
> > > > > +			      dsi->lane_mbps);
> > > > > +		return testdin;
> > > > > +	}
> > > > > +
> > > > > +	dsi_write(dsi, DSI_PHY_IF_CTRL, PHY_IF_CTRL_RESET);
> > > > > +	dsi_write(dsi, DSI_PWR_UP, POWERUP);
> > > > > +
> > > > > +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> > > > > +	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
> > > > > +		  PHY_TESTDIN(0x44));
> > > > > +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> > > > > +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> > > > > +	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
> > > > > +		  PHY_TESTDIN(testdin));
> > > > > +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> > > > > +	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static int imx_mipi_dsi_get_lane_mbps(void *priv_data,
> > > > > +				      const struct drm_display_mode *mode,
> > > > > +				      unsigned long mode_flags, u32 lanes,
> > > > > +				      u32 format, unsigned int *lane_mbps)
> > > > > +{
> > > > > +	struct imx_mipi_dsi *dsi = priv_data;
> > > > > +	int bpp;
> > > > > +	unsigned int i, target_mbps, mpclk;
> > > > > +	unsigned long pllref;
> > > > > +
> > > > > +	bpp = mipi_dsi_pixel_format_to_bpp(format);
> > > > > +	if (bpp < 0) {
> > > > > +		DRM_DEV_ERROR(dsi->dev, "failed to get bpp for format %d: %d\n",
> > > > > +			      format, bpp);
> > > > > +		return bpp;
> > > > > +	}
> > > > > +
> > > > > +	pllref = clk_get_rate(dsi->pllref_clk);
> > > > > +	if (pllref != 27000000)
> > > > > +		DRM_WARN("DSI pllref_clk not set to 27Mhz\n");
> > > > > +
> > > > > +	mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
> > > > > +	if (mpclk) {
> > > > > +		/* take 1/0.7 blanking overhead into consideration */
> > > > > +		target_mbps = (mpclk * (bpp / lanes) * 10) / 7;
> > > > > +	} else {
> > > > > +		DRM_DEV_ERROR(dsi->dev, "use default 1Gbps DPHY pll clock\n");
> > > > > +		target_mbps = 1000;
> > > > > +	}
> > > > > +
> > > > > +	DRM_DEV_DEBUG(dsi->dev, "target pllref_clk frequency is %uMbps\n",
> > > > > +		      target_mbps);
> > > > > +
> > > > > +	for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
> > > > > +		if (target_mbps < dptdin_map[i].max_mbps) {
> > > > > +			*lane_mbps = dptdin_map[i].max_mbps;
> > > > > +			dsi->lane_mbps = *lane_mbps;
> > > > > +			DRM_DEV_DEBUG(dsi->dev,
> > > > > +				      "real pllref_clk frequency is %uMbps\n",
> > > > > +				      *lane_mbps);
> > > > > +			return 0;
> > > > > +		}
> > > > > +	}
> > > > > +
> > > > > +	DRM_DEV_ERROR(dsi->dev, "DPHY clock frequency %uMbps is out of range\n",
> > > > > +		      target_mbps);
> > > > > +
> > > > > +	return -EINVAL;
> > > > > +}
> > > > > +
> > > > > +static int
> > > > > +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
> > > > > +			   struct dw_mipi_dsi_dphy_timing *timing)
> > > > > +{
> > > > > +	timing->clk_hs2lp = 0x40;
> > > > > +	timing->clk_lp2hs = 0x40;
> > > > > +	timing->data_hs2lp = 0x40;
> > > > > +	timing->data_lp2hs = 0x40;
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_imx6_phy_ops = {
> > > > > +	.init = imx_mipi_dsi_phy_init,
> > > > > +	.get_lane_mbps = imx_mipi_dsi_get_lane_mbps,
> > > > > +	.get_timing = dw_mipi_dsi_phy_get_timing,
> > > > > +};
> > > > > +
> > > > > +static struct dw_mipi_dsi_plat_data imx6q_mipi_dsi_drv_data = {
> > > > > +	.max_data_lanes = 2,
> > > > > +	.mode_valid = imx_mipi_dsi_mode_valid,
> > > > > +	.phy_ops = &dw_mipi_dsi_imx6_phy_ops,
> > > > > +};
> > > > > +
> > > > > +static const struct of_device_id imx_dsi_dt_ids[] = {
> > > > > +	{
> > > > > +		.compatible = "fsl,imx6q-mipi-dsi",
> > > > > +		.data = &imx6q_mipi_dsi_drv_data,
> > > > > +	},
> > > > > +	{ /* sentinel */ }
> > > > > +};
> > > > > +MODULE_DEVICE_TABLE(of, imx_dsi_dt_ids);
> > > > > +
> > > > > +static int imx_mipi_dsi_bind(struct device *dev, struct device *master,
> > > > > +			     void *data)
> > > > > +{
> > > > > +	struct imx_mipi_dsi *dsi = dev_get_drvdata(dev);
> > > > > +	struct drm_device *drm = data;
> > > > > +	int ret;
> > > > > +
> > > > > +	ret = clk_prepare_enable(dsi->pllref_clk);
> > > > > +	if (ret) {
> > > > > +		DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret);
> > > > > +		return ret;
> > > > > +	}
> > > > > +
> > > > > +	ret = imx_drm_create_encoder(drm, &dsi->encoder, dsi->dev->of_node);
> > > > > +	if (ret) {
> > > > > +		DRM_DEV_ERROR(dsi->dev, "failed to create drm encoder\n");
> > > > > +		return ret;
> > > > > +	}
> > > > > +
> > > > > +	drm_encoder_helper_add(&dsi->encoder, &imx_mipi_dsi_encoder_helpers);
> > > > > +
> > > > > +	ret = dw_mipi_dsi_bind(dsi->mipi_dsi, &dsi->encoder);
> > > > > +	if (ret) {
> > > > > +		DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
> > > > > +		return ret;
> > > > > +	}
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static void imx_mipi_dsi_unbind(struct device *dev, struct device *master,
> > > > > +				void *data)
> > > > > +{
> > > > > +	struct imx_mipi_dsi *dsi = dev_get_drvdata(dev);
> > > > > +
> > > > > +	dw_mipi_dsi_unbind(dsi->mipi_dsi);
> > > > > +
> > > > > +	clk_disable_unprepare(dsi->pllref_clk);
> > > > > +}
> > > > > +
> > > > > +static const struct component_ops imx_mipi_dsi_ops = {
> > > > > +	.bind	= imx_mipi_dsi_bind,
> > > > > +	.unbind	= imx_mipi_dsi_unbind,
> > > > > +};
> > > > > +
> > > > > +static int imx_mipi_dsi_probe(struct platform_device *pdev)
> > > > > +{
> > > > > +	struct device *dev = &pdev->dev;
> > > > > +	const struct of_device_id *of_id = of_match_device(imx_dsi_dt_ids, dev);
> > > > > +	struct dw_mipi_dsi_plat_data *pdata = (struct dw_mipi_dsi_plat_data *) of_id->data;
> > > > > +	struct imx_mipi_dsi *dsi;
> > > > > +	struct resource *res;
> > > > > +	int ret;
> > > > > +
> > > > > +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> > > > > +	if (!dsi)
> > > > > +		return -ENOMEM;
> > > > > +
> > > > > +	dsi->dev = dev;
> > > > > +
> > > > > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > > +	dsi->base = devm_ioremap_resource(dev, res);
> > > > > +	if (IS_ERR(dsi->base)) {
> > > > > +		ret = PTR_ERR(dsi->base);
> > > > > +		DRM_DEV_ERROR(dev, "Unable to get dsi registers: %d\n", ret);
> > > > > +		return ret;
> > > > > +	}
> > > > > +
> > > > > +	dsi->pllref_clk = devm_clk_get(dev, "ref");
> > > > > +	if (IS_ERR(dsi->pllref_clk)) {
> > > > > +		ret = PTR_ERR(dsi->pllref_clk);
> > > > > +		DRM_DEV_ERROR(dev, "Unable to get pllref_clk: %d\n", ret);
> > > > > +		return ret;
> > > > > +	}
> > > > > +
> > > > > +	dsi->mux_sel = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,gpr");
> > > > > +	if (IS_ERR(dsi->mux_sel)) {
> > > > > +		ret = PTR_ERR(dsi->mux_sel);
> > > > > +		DRM_DEV_ERROR(dev, "Failed to get GPR regmap: %d\n", ret);
> > > > > +		return ret;
> > > > > +	}
> > > > > +
> > > > > +	dev_set_drvdata(dev, dsi);
> > > > > +
> > > > > +	imx6q_mipi_dsi_drv_data.base = dsi->base;
> > > > > +	imx6q_mipi_dsi_drv_data.priv_data = dsi;
> > > > > +
> > > > > +	dsi->mipi_dsi = dw_mipi_dsi_probe(pdev, pdata);
> > > > > +	if (IS_ERR(dsi->mipi_dsi)) {
> > > > > +		ret = PTR_ERR(dsi->mipi_dsi);
> > > > > +		DRM_DEV_ERROR(dev, "Failed to probe DW DSI host: %d\n", ret);
> > > > > +		goto err_clkdisable;
> > > > > +	}
> > > > > +
> > > > > +	return component_add(&pdev->dev, &imx_mipi_dsi_ops);
> > > > > +
> > > > > +err_clkdisable:
> > > > > +	clk_disable_unprepare(dsi->pllref_clk);
> > > > > +	return ret;
> > > > > +}
> > > > > +
> > > > > +static int imx_mipi_dsi_remove(struct platform_device *pdev)
> > > > > +{
> > > > > +	component_del(&pdev->dev, &imx_mipi_dsi_ops);
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > > +static struct platform_driver imx_mipi_dsi_driver = {
> > > > > +	.probe		= imx_mipi_dsi_probe,
> > > > > +	.remove		= imx_mipi_dsi_remove,
> > > > > +	.driver		= {
> > > > > +		.of_match_table = imx_dsi_dt_ids,
> > > > > +		.name	= "dw-mipi-dsi-imx6",
> > > > > +	},
> > > > > +};
> > > > > +module_platform_driver(imx_mipi_dsi_driver);
> > > > > +
> > > > > +MODULE_DESCRIPTION("i.MX6 MIPI DSI host controller driver");
> > > > > +MODULE_AUTHOR("Liu Ying <victor.liu@xxxxxxx>");
> > > > > +MODULE_AUTHOR("Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx>");
> > > > > +MODULE_LICENSE("GPL");
> > > > > -- > 2.26.0
> > > > >
> > > > 
> > > > -- 
> > > > Regards,
> > > > 
> > > > Laurent Pinchart
> > > > _______________________________________________
> > > > dri-devel mailing list
> > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > https://urldefense.com/v3/__https://lists.freedesktop.org/mailman/listinfo/dri-devel__;!!A4F2R9G_pg!NhBPZGbhUKJY_mrt-2Ft_ja04W8XPqZ8P3-wntQomu30weMxgQfUEXZgn99IbZV5$ 
> > > 
> > > -- 
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > https://urldefense.com/v3/__http://blog.ffwll.ch__;!!A4F2R9G_pg!NhBPZGbhUKJY_mrt-2Ft_ja04W8XPqZ8P3-wntQomu30weMxgQfUEXZgn_FrwlWk$ 
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> https://urldefense.com/v3/__http://blog.ffwll.ch__;!!A4F2R9G_pg!NhBPZGbhUKJY_mrt-2Ft_ja04W8XPqZ8P3-wntQomu30weMxgQfUEXZgn_FrwlWk$ 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://urldefense.com/v3/__https://lists.freedesktop.org/mailman/listinfo/dri-devel__;!!A4F2R9G_pg!NhBPZGbhUKJY_mrt-2Ft_ja04W8XPqZ8P3-wntQomu30weMxgQfUEXZgn99IbZV5$ 


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux