Re: [PATCH 00/17] drm/mgag200: Convert to atomic modesetting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi John

Am 30.04.20 um 02:11 schrieb John Donnelly:
> On 4/29/20 9:32 AM, Thomas Zimmermann wrote:
>> This patchset converts mgag200 to atomic modesetting. It uses simple
>> KMS helpers and SHMEM.
>>
>> Patches 1 to 4 simplifies the driver before the conversion. For example,
>> the HW cursor is not usable with the way universal planes work. A few
>> data structures can be cleaned up.
>>
>> Patches 5 to 15 untangle the existing modesetting code into smaller
>> functions. Specifically, mode setting and plane updates are being
>> separated from each other.
>>
>> Patch 16 converts mgag200 to simple KMS helpers and enables atomic
>> mode setting.
>>
>> As some HW seems to require a framebuffer offset of 0 within the video
>> memory, it does not work with atomic modesetting. Atomically switching
>> plane framebuffers, requires either source or target buffer to be located
>> at a non-0 offet. To resolve this problem, patch 17 converts mgag200 from
>> VRAM helpers to SHMEM helpers. During plane updates, the content of the
>> SHMEM BO is memcpy'd to VRAM. From my subjective obersation, performance
>> is not nuch different from the original code.
>>
>> The patchset has been tested on MGA G200EH hardware.
>>
>> Thomas Zimmermann (17):
>>    drm/mgag200: Remove HW cursor
>>    drm/mgag200: Remove unused fields from struct mga_device
>>    drm/mgag200: Embed connector instance in struct mga_device
>>    drm/mgag200: Use managed mode-config initialization
>>    drm/mgag200: Clean up mga_set_start_address()
>>    drm/mgag200: Clean up mga_crtc_do_set_base()
>>    drm/mgag200: Move mode-setting code into separate helper function
>>    drm/mgag200: Split MISC register update into PLL selection, SYNC and
>>      I/O
>>    drm/mgag200: Update mode registers after plane registers
>>    drm/mgag200: Set pitch in a separate helper function
>>    drm/mgag200: Set primary plane's format in separate helper function
>>    drm/mgag200: Move TAGFIFO reset into separate function
>>    drm/mgag200: Move hiprilvl setting into separate functions
>>    drm/mgag200: Move register initialization into separate function
>>    drm/mgag200: Remove waiting from DPMS code
>>    drm/mgag200: Convert to simple KMS helper
>>    drm/mgag200: Replace VRAM helpers with SHMEM helpers
>>
>>   drivers/gpu/drm/mgag200/Kconfig          |   4 +-
>>   drivers/gpu/drm/mgag200/Makefile         |   2 +-
>>   drivers/gpu/drm/mgag200/mgag200_cursor.c | 319 --------
>>   drivers/gpu/drm/mgag200/mgag200_drv.c    |  51 +-
>>   drivers/gpu/drm/mgag200/mgag200_drv.h    |  43 +-
>>   drivers/gpu/drm/mgag200/mgag200_main.c   |  28 -
>>   drivers/gpu/drm/mgag200/mgag200_mode.c   | 948 ++++++++++++-----------
>>   drivers/gpu/drm/mgag200/mgag200_reg.h    |   5 +-
>>   drivers/gpu/drm/mgag200/mgag200_ttm.c    |  35 +-
>>   9 files changed, 563 insertions(+), 872 deletions(-)
>>   delete mode 100644 drivers/gpu/drm/mgag200/mgag200_cursor.c
>>
>> -- 
>> 2.26.0
>>
> 
> 
>  Hi Thomas ,
> 
>  I would like to test this on hardware that uses this device integrated
> into as BMC  ( iLo ) that I have ran into problems before. Can you post
> your staging URL so I can clone it ?

Sure, I'll set something up for you. But it could take until next week.
I promise not to merge the patches before you had a chance to test them.

Best regards
Thomas

> 
> 
> ( Thank you for CC'ing me. I removed my email from on dlist recently) .
> 
> 
> 
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux