On Wed, Apr 29, 2020 at 10:10:05AM +0800, Nicolas Boichat wrote:
> On Mon, Apr 27, 2020 at 2:18 PM Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
> >
> > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
> > for portable device. It converts MIPI DSI/DPI to DisplayPort 1.3 4K.
> >
> > The ANX7625 can support both USB Type-C PD feature and MIPI DSI/DPI
> > to DP feature. This driver only enabled MIPI DSI/DPI to DP feature.
> >
> > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/bridge/Makefile | 2 +-
> > drivers/gpu/drm/bridge/analogix/Kconfig | 6 +
> > drivers/gpu/drm/bridge/analogix/Makefile | 1 +
> > drivers/gpu/drm/bridge/analogix/anx7625.c | 2158 +++++++++++++++++++++++++++++
> > drivers/gpu/drm/bridge/analogix/anx7625.h | 410 ++++++
> > 5 files changed, 2576 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.c
> > create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.h
> >
> > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> > index 4934fcf..bcd388a 100644
> > --- a/drivers/gpu/drm/bridge/Makefile
> > +++ b/drivers/gpu/drm/bridge/Makefile
> > @@ -12,8 +12,8 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o
> > obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
> > obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
> > obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
> > -obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
> > obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> > obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
> > obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
> > +obj-y += analogix/
> > obj-y += synopsys/
> > diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
> > index e930ff9..b2f127e 100644
> > --- a/drivers/gpu/drm/bridge/analogix/Kconfig
> > +++ b/drivers/gpu/drm/bridge/analogix/Kconfig
> > @@ -2,3 +2,9 @@
> > config DRM_ANALOGIX_DP
> > tristate
> > depends on DRM
> > +
> > +config ANALOGIX_ANX7625
> > + tristate "Analogix MIPI to DP interface support"
> > + help
> > + ANX7625 is an ultra-low power 4K mobile HD transmitter designed
> > + for portable devices. It converts MIPI/DPI to DisplayPort1.3 4K.
> > diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile
> > index fdbf3fd..8a52867 100644
> > --- a/drivers/gpu/drm/bridge/analogix/Makefile
> > +++ b/drivers/gpu/drm/bridge/analogix/Makefile
> > @@ -1,3 +1,4 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > +obj-$(CONFIG_ANALOGIX_ANX7625) += anx7625.o
> > analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o
> > obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > new file mode 100644
> > index 0000000..fff7a49
> > [snip]
> > +static int anx7625_attach_dsi(struct anx7625_data *ctx)
> > +{
> > + struct mipi_dsi_host *host;
> > + struct mipi_dsi_device *dsi;
> > + struct device_node *mipi_host_node;
> > + struct device *dev = &ctx->client->dev;
> > + const struct mipi_dsi_device_info info = {
> > + .type = "anx7625",
> > + .channel = 0,
> > + .node = NULL,
> > + };
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "attach dsi\n");
> > +
> > + if (ctx->pdata.dsi_supported)
> > + mipi_host_node = ctx->pdata.node.mipi_dsi_host_node;
> > + else
> > + mipi_host_node = ctx->pdata.node.mipi_dpi_host_node;
> > +
> > + if (!mipi_host_node) {
> > + DRM_ERROR("dsi host is not configured.\n");
> > + return -EINVAL;
> > + }
> > +
> > + host = of_find_mipi_dsi_host_by_node(mipi_host_node);
>
> I tried this driver when connected to a dpi interface, and this fails,
> as of_find_mipi_dsi_host_by_node is not able to find the dpi interface
> from the SoC.
>
> I'm not too familiar with how dpi bridges are supposed to work in the
> kernel, but should we even call "anx7625_attach_dsi" for DPI
> interface?
DPI needs hardware support, and I don't know how to register DPI interface
in the driver too, I'll remove the DPI support in the next serial.
>
> > + if (!host) {
> > + DRM_ERROR("failed to find dsi host.\n");
> > + return -EINVAL;
> > + }
> > +
> > + dsi = mipi_dsi_device_register_full(host, &info);
> > + if (IS_ERR(dsi)) {
> > + DRM_ERROR("failed to create dsi device.\n");
> > + return -EINVAL;
> > + }
> > +
> > + dsi->lanes = 4;
> > + dsi->format = MIPI_DSI_FMT_RGB888;
> > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> > + MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> > + MIPI_DSI_MODE_EOT_PACKET |
> > + MIPI_DSI_MODE_VIDEO_HSE;
> > +
> > + if (mipi_dsi_attach(dsi) < 0) {
> > + DRM_ERROR("failed to attach dsi to host.\n");
> > + mipi_dsi_device_unregister(dsi);
> > + return -EINVAL;
> > + }
> > +
> > + ctx->dsi = dsi;
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "attach dsi succeeded.\n");
> > +
> > + return 0;
> > +}
> > +
> > [snip]
> > +static int anx7625_bridge_attach(struct drm_bridge *bridge)
> > +{
> > + struct anx7625_data *ctx = bridge_to_anx7625(bridge);
> > + int err;
> > + struct device *dev = &ctx->client->dev;
> > +
> > + DRM_DEV_DEBUG_DRIVER(dev, "drm attach\n");
> > + if (!bridge->encoder) {
> > + DRM_ERROR("Parent encoder object not found");
> > + return -ENODEV;
> > + }
> > +
> > + err = drm_connector_init(bridge->dev, &ctx->connector,
> > + &anx7625_connector_funcs,
> > + ctx->pdata.internal_panel ?
> > + DRM_MODE_CONNECTOR_eDP :
> > + DRM_MODE_CONNECTOR_DisplayPort);
> > + if (err) {
> > + DRM_ERROR("Failed to initialize connector: %d\n", err);
> > + return err;
> > + }
> > +
> > + drm_connector_helper_add(&ctx->connector,
> > + &anx7625_connector_helper_funcs);
> > +
> > + err = drm_connector_register(&ctx->connector);
> > + if (err) {
> > + DRM_ERROR("Failed to register connector: %d\n", err);
> > + return err;
> > + }
> > +
> > + ctx->connector.polled = DRM_CONNECTOR_POLL_HPD;
> > +
> > + err = drm_connector_attach_encoder(&ctx->connector, bridge->encoder);
> > + if (err) {
> > + DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
> > + drm_connector_unregister(&ctx->connector);
> > + return err;
> > + }
> > +
> > + err = anx7625_attach_dsi(ctx);
> > + if (err) {
> > + DRM_ERROR("Failed to attach to dsi : %d\n", err);
> > + drm_connector_unregister(&ctx->connector);
> > + return err;
> > + }
> > +
> > + ctx->bridge_attached = 1;
> > +
> > + return 0;
> > +}
> > +
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
