Hi Krzysztof,
On 2020-04-27 8:46 a.m., Krzysztof Kozlowski wrote:
> On Sun, Apr 26, 2020 at 07:57:12AM -0700, Jonathan Bakker wrote:
>> Hi Paul,
>>
>> On 2020-04-26 5:56 a.m., Paul Cercueil wrote:
>>>
>>>
>>> Le ven. 24 avril 2020 à 22:34, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :
>>>> From: Jonathan Bakker <xc-racer2@xxxxxxx>
>>>>
>>>> All s5pv210 devices have a PowerVR SGX 540 (revision 120) attached.
>>>>
>>>> There is no external regulator for it so it can be enabled by default.
>>>>
>>>> Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
>>>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>>>> ---
>>>> arch/arm/boot/dts/s5pv210.dtsi | 13 +++++++++++++
>>>> 1 file changed, 13 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
>>>> index 2ad642f51fd9..abbdda205c1b 100644
>>>> --- a/arch/arm/boot/dts/s5pv210.dtsi
>>>> +++ b/arch/arm/boot/dts/s5pv210.dtsi
>>>> @@ -512,6 +512,19 @@ vic3: interrupt-controller@f2300000 {
>>>> #interrupt-cells = <1>;
>>>> };
>>>>
>>>> + gpu: gpu@f3000000 {
>>>> + compatible = "samsung,s5pv210-sgx540-120";
>
> This should not pass the bindings check because you missed last
> compatibles.
>
Thanks for pointing that out, I'll add it and make sure it passes the bindings check.
>>>> + reg = <0xf3000000 0x10000>;
>>>> + interrupt-parent = <&vic2>;
>>>> + interrupts = <10>;
>>>> + clock-names = "core";
>>>> + clocks = <&clocks CLK_G3D>;
>>>> +
>>>> + assigned-clocks = <&clocks MOUT_G3D>, <&clocks DOUT_G3D>;
>>>> + assigned-clock-rates = <0>, <66700000>;
>>>> + assigned-clock-parents = <&clocks MOUT_MPLL>;
>>>
>>> What are these clocks for, and why are they reparented / reclocked?
>>>
>>> Shouldn't they be passed to 'clocks' as well?
>>>
>>> -Paul
>>>
>>
>> The G3D clock system can have multiple parents, and for stable operation
>> it's recommended to use the MPLL clock as the parent (which in turn
>> is actually a mux as well). MOUT_G3D is simply the mux for CLK_G3D
>> (SGX core clock), DOUT_G3D is the divider. DOUT_G3D could equally be CLK_G3D
>> (and probably should be, for readability) as CLK_G3D is simply the gate and
>> DOUT_G3D is the divider for it.
>
> Good point, it should be CLK_G3D instead of DOUT. Can you fix this as
> well?
Yep, will do. Nikolaus, I'll send you an updated patch to include.
>
> Best regards,
> Krzysztof
>
Thanks,
Jonathan
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
