On Wed, Apr 15, 2020 at 09:40:27AM +0200, Daniel Vetter wrote:
> That way we can get rid of this final piece of init code, and use the
> simple pipe helpers as intended.
>
> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> Cc: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
One nit below, with this addressed:
Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/arc/arcpgu_drv.c | 51 ++++++++++----------------------
> 1 file changed, 16 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/arc/arcpgu_drv.c b/drivers/gpu/drm/arc/arcpgu_drv.c
> index b0c941d91545..857812f25bec 100644
> --- a/drivers/gpu/drm/arc/arcpgu_drv.c
> +++ b/drivers/gpu/drm/arc/arcpgu_drv.c
> @@ -95,32 +95,11 @@ static const struct drm_connector_funcs arcpgu_drm_connector_funcs = {
> .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> };
>
> -static int arcpgu_drm_sim_init(struct drm_device *drm, struct device_node *np)
> +static int arcpgu_drm_sim_init(struct drm_device *drm, struct drm_connector *connector)
> {
> - struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(drm);
> - struct drm_encoder *encoder;
> - struct drm_connector *connector;
> - int ret;
> -
> - encoder = &arcpgu->pipe.encoder;
> -
> - connector = &arcpgu->sim_conn;
> drm_connector_helper_add(connector, &arcpgu_drm_connector_helper_funcs);
> -
> - ret = drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs,
> + return drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs,
> DRM_MODE_CONNECTOR_VIRTUAL);
Please fix indent.
> - if (ret < 0) {
> - dev_err(drm->dev, "failed to initialize drm connector\n");
> - return ret;
> - }
> -
> - ret = drm_connector_attach_encoder(connector, encoder);
> - if (ret < 0) {
> - dev_err(drm->dev, "could not attach connector to encoder\n");
> - return ret;
> - }
> -
> - return 0;
> }
>
> #define ENCODE_PGU_XY(x, y) ((((x) - 1) << 16) | ((y) - 1))
> @@ -273,6 +252,7 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
> {
> struct platform_device *pdev = to_platform_device(arcpgu->drm.dev);
> struct device_node *encoder_node = NULL, *endpoint_node = NULL;
> + struct drm_connector *connector = NULL;
> struct drm_device *drm = &arcpgu->drm;
> struct resource *res;
> int ret;
> @@ -307,13 +287,6 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
> if (dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32)))
> return -ENODEV;
>
> - ret = drm_simple_display_pipe_init(drm, &arcpgu->pipe, &arc_pgu_pipe_funcs,
> - arc_pgu_supported_formats,
> - ARRAY_SIZE(arc_pgu_supported_formats),
> - NULL, NULL);
> - if (ret)
> - return ret;
> -
> /*
> * There is only one output port inside each device. It is linked with
> * encoder endpoint.
> @@ -322,8 +295,21 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
> if (endpoint_node) {
> encoder_node = of_graph_get_remote_port_parent(endpoint_node);
> of_node_put(endpoint_node);
> + } else {
> + connector = &arcpgu->sim_conn;
> + dev_info(drm->dev, "no encoder found. Assumed virtual LCD on simulation platform\n");
> + ret = arcpgu_drm_sim_init(drm, connector);
> + if (ret < 0)
> + return ret;
> }
>
> + ret = drm_simple_display_pipe_init(drm, &arcpgu->pipe, &arc_pgu_pipe_funcs,
> + arc_pgu_supported_formats,
> + ARRAY_SIZE(arc_pgu_supported_formats),
> + NULL, connector);
> + if (ret)
> + return ret;
> +
> if (encoder_node) {
> struct drm_bridge *bridge;
>
> @@ -335,11 +321,6 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
> ret = drm_simple_display_pipe_attach_bridge(&arcpgu->pipe, bridge);
> if (ret)
> return ret;
> - } else {
> - dev_info(drm->dev, "no encoder found. Assumed virtual LCD on simulation platform\n");
> - ret = arcpgu_drm_sim_init(drm, NULL);
> - if (ret < 0)
> - return ret;
> }
>
> drm_mode_config_reset(drm);
> --
> 2.25.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
