On Wed, 22 Apr 2020, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
Hi Adrian,
Thank you for the patch.
On Tue, Apr 21, 2020 at 07:16:07PM +0300, Adrian Ratiu wrote:
This provides an example DT binding for the MIPI DSI host
controller present on the i.MX6 SoC based on Synopsis
DesignWare v1.01 IP. Cc: Rob Herring <robh@xxxxxxxxxx> Cc:
Neil Armstrong <narmstrong@xxxxxxxxxxxx> Cc: Fabio Estevam
<festevam@xxxxxxxxx> Cc: Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> Cc:
devicetree@xxxxxxxxxxxxxxx Tested-by: Adrian Pop
<pop.adrian61@xxxxxxxxx> Tested-by: Arnaud Ferraris
<arnaud.ferraris@xxxxxxxxxxxxx> Signed-off-by: Sjoerd Simons
<sjoerd.simons@xxxxxxxxxxxxx> Signed-off-by: Martyn Welch
<martyn.welch@xxxxxxxxxxxxx> Signed-off-by: Adrian Ratiu
<adrian.ratiu@xxxxxxxxxxxxx> --- Changes since v6:
- Added ref to the newly created snps,dw-mipi-dsi.yaml
(Laurent) - Moved *-cells properties outside
patternProperties (Laurent) - Removed the panel port
documentation (Laurent) - Wrapped lines at 80 chars, typo
fixes, sort includes (Laurent)
Changes since v5:
- Fixed missing reg warning (Fabio) - Updated dt-schema and
fixed warnings (Rob)
Changes since v4:
- Fixed yaml binding to pass `make dt_binding_check
dtbs_check` and addressed received binding feedback (Rob)
Changes since v3:
- Added commit message (Neil) - Converted to yaml format
(Neil) - Minor dt node + driver fixes (Rob) - Added small
panel example to the host controller binding
Changes since v2:
- Fixed commit tags (Emil)
---
.../display/imx/fsl,mipi-dsi-imx6.yaml | 135
++++++++++++++++++ 1 file changed, 135 insertions(+) create
mode 100644
Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
diff --git
a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
new file mode 100644 index 0000000000000..b73e3ae33a852 ---
/dev/null +++
b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
@@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR
BSD-2-Clause) +%YAML 1.2 +--- +$id:
http://devicetree.org/schemas/display/imx/fsl,mipi-dsi-imx6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml# +
+title: Freescale i.MX6 DW MIPI DSI Host Controller +
+maintainers: + - Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> +
+description: | + The i.MX6 DSI host controller is a Synopsys
DesignWare MIPI DSI v1.01 + IP block with a companion PHY IP.
+ + These DT bindings follow the Synopsys DW MIPI DSI bindings
defined in +
Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
with + the following device-specific properties. + +allOf: +
- $ref: ../bridge/snps,dw-mipi-dsi.yaml# + +properties: +
'#address-cells': + const: 1 + + '#size-cells': + const:
0 + + compatible: + items: + - const:
fsl,imx6q-mipi-dsi + - const: snps,dw-mipi-dsi + + reg: +
maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: +
items: + - description: Module Clock + - description:
DSI bus clock + + clock-names: + items: + - const: ref
+ - const: pclk + + fsl,gpr: + description: +
Phandle to the iomuxc-gpr region containing the multiplexer
ctrl register. + $ref:
/schemas/types.yaml#/definitions/phandle + + ports: + type:
object + description: | + A node containing DSI input &
output port nodes with endpoint + definitions as
documented in +
Documentation/devicetree/bindings/media/video-interfaces.txt +
Documentation/devicetree/bindings/graph.txt + properties: +
port@0: + type: object + description: +
DSI input port node, connected to the ltdc rgb output port. +
+ port@1: + type: object + description: +
RGB output port node, connected to a panel or a bridge input
port.
Isn't it the other way around, doesn't the bridge take RGB input
and output DSI ? And to be precise, it's not about RGB, but
about the input being parallel interface (DSI will also carry
RGB).
I would add
required:
- port@0 - port@1
Sorry for the confusions and omissions :) Will fix the names to
avoid ambiguities and also add the required property and the
missing port@0 in the example below in v8.
Many thanks,
Adrian
+
+additionalProperties: false
+
+patternProperties:
+ "^panel@[0-3]$":
+ type: object
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ports
+
+examples:
+ - |+
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dsi: dsi@21e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0x021e0000 0x4000>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,gpr = <&gpr>;
+ clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+ <&clks IMX6QDL_CLK_MIPI_IPG>;
+ clock-names = "ref", "pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
port@0 is missing.
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "sharp,ls032b3sx01";
+ reg = <0>;
+ reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
