Amlogic uses a proprietary lossless image compression protocol and format
for their hardware video codec accelerators, either video decoders or
video input encoders.
It considerably reduces memory bandwidth while writing and reading
frames in memory.
The underlying storage is considered to be 3 components, 8bit or 10-bit
per component, YCbCr 420, single plane :
- DRM_FORMAT_YUV420_8BIT
- DRM_FORMAT_YUV420_10BIT
This modifier will be notably added to DMA-BUF frames imported from the V4L2
Amlogic VDEC decoder.
This introduces the basic layout composed of:
- a body content organized in 64x32 superblocks with 4096 bytes per
superblock in default mode.
- a 32 bytes per 128x64 header block
This layout is tranferrable between Amlogic SoCs supporting this modifier.
Tested-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
include/uapi/drm/drm_fourcc.h | 74 +++++++++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
index 8bc0b31597d8..b7596ba2af30 100644
--- a/include/uapi/drm/drm_fourcc.h
+++ b/include/uapi/drm/drm_fourcc.h
@@ -309,6 +309,7 @@ extern "C" {
#define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07
#define DRM_FORMAT_MOD_VENDOR_ARM 0x08
#define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09
+#define DRM_FORMAT_MOD_VENDOR_AMLOGIC 0x0a
/* add more to the end as needed */
@@ -804,6 +805,79 @@ extern "C" {
*/
#define DRM_FORMAT_MOD_ALLWINNER_TILED fourcc_mod_code(ALLWINNER, 1)
+/*
+ * Amlogic Video Framebuffer Compression modifiers
+ *
+ * Amlogic uses a proprietary lossless image compression protocol and format
+ * for their hardware video codec accelerators, either video decoders or
+ * video input encoders.
+ *
+ * It considerably reduces memory bandwidth while writing and reading
+ * frames in memory.
+ *
+ * The underlying storage is considered to be 3 components, 8bit or 10-bit
+ * per component YCbCr 420, single plane :
+ * - DRM_FORMAT_YUV420_8BIT
+ * - DRM_FORMAT_YUV420_10BIT
+ *
+ * The first 8 bits of the mode defines the layout, then the following 8 bits
+ * defines the options changing the layout.
+ *
+ * Not all combinations are valid, and different SoCs may support different
+ * combinations of layout and options.
+ */
+#define __fourcc_mod_amlogic_layout_mask 0xf
+#define __fourcc_mod_amlogic_options_shift 8
+#define __fourcc_mod_amlogic_options_mask 0xf
+
+#define DRM_FORMAT_MOD_AMLOGIC_FBC(__layout, __options) \
+ fourcc_mod_code(AMLOGIC, \
+ ((__layout) & __fourcc_mod_amlogic_layout_mask) | \
+ ((__options) & __fourcc_mod_amlogic_options_mask \
+ << __fourcc_mod_amlogic_options_shift))
+
+/* Amlogic FBC Layouts */
+
+/*
+ * Amlogic FBC Basic Layout
+ *
+ * The basic layout is composed of:
+ * - a body content organized in 64x32 superblocks with 4096 bytes per
+ * superblock in default mode.
+ * - a 32 bytes per 128x64 header block
+ *
+ * This layout is transferrable between Amlogic SoCs supporting this modifier.
+ */
+#define AMLOGIC_FBC_LAYOUT_BASIC (1ULL)
+
+/*
+ * Amlogic FBC Scatter Memory layout
+ *
+ * Indicates the header contains IOMMU references to the compressed
+ * frames content to optimize memory access and layout.
+ *
+ * In this mode, only the header memory address is needed, thus the
+ * content memory organization is tied to the current producer
+ * execution and cannot be saved/dumped neither transferrable between
+ * Amlogic SoCs supporting this modifier.
+ */
+#define AMLOGIC_FBC_LAYOUT_SCATTER (2ULL)
+
+/* Amlogic FBC Layout Options Bit Mask */
+
+/*
+ * Amlogic FBC Memory Saving mode
+ *
+ * Indicates the storage is packed when pixel size is multiple of word
+ * boudaries, i.e. 8bit should be stored in this mode to save allocation
+ * memory.
+ *
+ * This mode reduces body layout to 3072 bytes per 64x32 superblock with
+ * the basic layout and 3200 bytes per 64x32 superblock combined with
+ * the scatter layout.
+ */
+#define AMLOGIC_FBC_OPTION_MEM_SAVING (1ULL << 0)
+
#if defined(__cplusplus)
}
#endif
--
2.22.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
