On Wed, Apr 15, 2020 at 02:29:29AM +0300, Eugeniy Paltsev wrote: > This patch adds documentation of device tree bindings for the Synopsys > HDMI 2.0 TX encoder driver for ARC SoCs. You're going to need to base this on top of Laurent's conversion of dw_hdmi.txt to schema. > > Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx> > --- > .../display/bridge/snps,arc-dw-hdmi.yaml | 136 ++++++++++++++++++ > 1 file changed, 136 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml > new file mode 100644 > index 000000000000..9b2fdfecd5b3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml > @@ -0,0 +1,136 @@ > +# SPDX-License-Identifier: GPL-2.0 Dual license new bindings please: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/snps,arc-dw-hdmi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Synopsys DesignWare HDMI 2.0 TX encoder driver Bindings are for h/w blocks, not drivers. > + > +maintainers: > + - Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx> > + > +description: | > + The HDMI transmitter is a Synopsys DesignWare HDMI 2.0 TX controller IP > + with a companion of Synopsys DesignWare HDMI 2.0 TX PHY IP. Sounds like 2 blocks? > + > + These DT bindings follow the Synopsys DWC HDMI TX bindings defined in > + Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt > + with the following device-specific properties. > + > +properties: > + compatible: > + const: snps,arc-dw-hdmi-hsdk > + > + reg: > + maxItems: 1 > + description: | > + Memory mapped base address and length of the DWC HDMI TX registers. Can drop. > + > + clocks: > + items: > + - description: The bus clock for AHB / APB > + - description: The internal register configuration clock > + > + clock-names: > + items: > + - const: iahb > + - const: isfr > + > + interrupts: > + maxItems: 1 > + description: Reference to the DWC HDMI TX interrupt Can drop. > + > + reg-io-width: > + allOf: > + - $ref: /schemas/types.yaml#/definitions/uint32 > + - enum: [1, 4] > + description: | > + Width of the registers specified by the reg property. The > + value is expressed in bytes and must be equal to 1 or 4 if specified. > + The register width defaults to 1 if the property is not present. default: 1 The description is pretty much a plain text version of the constraints, so all but the first sentence can be dropped. > + > + ports: > + type: object > + description: | > + A ports node with endpoint definitions as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt Can drop. That's all 'ports'. > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + port@0: > + type: object > + description: | > + Video input endpoints of the controller. > + Usually it is associated with ARC PGU. > + > + port@1: > + type: object > + description: | > + Output endpoints of the controller. HDMI connector. > + > + required: > + - "#address-cells" > + - "#size-cells" > + - port@0 > + - port@1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - interrupts > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + hdmi@10000 { > + compatible = "snps,arc-dw-hdmi-hsdk"; > + reg = <0x10000 0x10000>; > + reg-io-width = <4>; > + interrupts = <14>; > + clocks = <&apbclk>, <&hdmi_pix_clk>; > + clock-names = "iahb", "isfr"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + hdmi_enc_input: endpoint { > + remote-endpoint = <&pgu_output>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + hdmi_enc_out: endpoint { > + remote-endpoint = <&hdmi_con>; > + }; > + }; > + }; > + }; > + > + hdmi-out { > + port { > + hdmi_con: endpoint { > + remote-endpoint = <&hdmi_enc_out>; > + }; > + }; > + }; > + > + pgu { > + port_o: port { > + pgu_output: endpoint { > + remote-endpoint = <&hdmi_enc_input>; > + }; > + }; > + }; > -- > 2.21.1 > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
