17.04.2020 00:39, Laurent Pinchart пишет: > Hi Dmitry, > > On Fri, Apr 17, 2020 at 12:15:33AM +0300, Dmitry Osipenko wrote: >> 16.04.2020 23:50, Laurent Pinchart пишет: >>> On Thu, Apr 16, 2020 at 11:21:40PM +0300, Dmitry Osipenko wrote: >>>> 16.04.2020 21:52, Dmitry Osipenko пишет: >>>> ... >>>>>> May I also recommend switching to the DRM panel bridge helper ? It will >>>>>> simplify the code. >>>>> >>>>> Could you please clarify what is the "DRM panel bridge helper"? >>>>> >>>>> I think we won't need any additional helpers after switching to the >>>>> bridge connector helper, no? >>>> >>>> Actually, I now see that the panel needs to be manually attached to the >>>> connector. >>> >>> The DRM panel bridge helper creates a bridge from a panel (with >>> devm_drm_panel_bridge_add()). You can then attach that bridge to the >>> chain, like any other bridge, and the enable/disable operations will be >>> called automatically without any need to call the panel enable/disable >>> manually as done currently. >>> >>>> Still it's not apparent to me how to get panel out of the bridge. It >>>> looks like there is no such "panel helper" for the bridge API or I just >>>> can't find it. >>> >>> You don't need to get a panel out of the bridge. You should get the >>> bridge as done today, >> >> You mean "get the panel", correct? > > Yes, sorry. > >>> and wrap it in a bridge with >>> devm_drm_panel_bridge_add(). >>> >> >> The lvds-codec already wraps panel into the bridge using >> devm_drm_panel_bridge_add() and chains it for us, please see >> lvds_codec_probe() / lvds_codec_attach(). >> >> Does it mean that lvds-codec is not supporting the new model? > > No, that *is* the new model :-) As I think I've commented during review, > when you have an LVDS encoder and a panel, you don't need to handle the > panel at all. When you have an RGB panel connected directly to the RGB > output, you need to wrap it in a bridge, exactly the same way as > lvds-codec does for its panel. > >> Everything works nicely using the old model, where bridge creates >> connector and attaches panel to it for us. >> >> [I'm still not sure what is the point to use the new model in a case of >> a simple chain of bridges] >> >> Using the new model, the connector isn't created by the bridge, so I >> need to duplicate that creation effort in the driver. Once the bridge >> connector is manually created, I need to attach panel to this connector, >> but panel is reachable only via the remote bridge (which wraps the panel). >> >> driver connector -> LVDS bridge -> panel bridge -> panel > > With the new model, > > 1. The display driver and the bridge drivers need to get hold of the > bridge directly connected to their output (for instance with > of_drm_find_panel()). If the output is connected to a panel, they > need to wrap that panel in a bridge (with > devm_drm_panel_bridge_add()). I plan, in the future, to make creation > of panel bridges automatic, so drivers won't have to care. > > 2. The display driver needs to create a dummy drm_encoder for each of > its outputs (for instance with drm_simple_encoder_init()). > > 3. The display driver needs to create a drm_connector for each of its > outputs, and implement connector operations by delegating them to the > bridges in the pipeline. Unless there's a good reason not to do so, > this should be done with drm_bridge_connector_init(). > > That's it. Every driver then focusses on its own needs, bridge drivers > handle only the device they're associated with, and the DRM core and DRM > bridge connector helper will handle all the rest. > Thank you very much for the clarification again! :) Now I realized what was the missing part.. in my case display panel is mounted upside-down and display output needs to be rotated by 180°. I have a local patch (hack) that adds orientation-property support to the panel-lvds driver and previously the panel's orientation was assigned to the connector using drm_panel_attach(), but now this attachment doesn't happen and I found that panel_lvds_get_modes() missed drm_connector_set_panel_orientation() in my patch. Everything is okay once the panel_lvds_get_modes() is corrected. I'll prepare the v4. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
