Re: [PATCH v11 1/5] dt-bindings: display: xlnx: Add ZynqMP DP subsystem bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hyun,

On Thu, Apr 02, 2020 at 06:11:25AM +0300, Laurent Pinchart wrote:
> On Wed, Mar 18, 2020 at 06:08:57PM -0700, Hyun Kwon wrote:
> > On Wed, 2020-03-18 at 12:26:51 -0700, Sam Ravnborg wrote:
> >> On Wed, Mar 18, 2020 at 05:37:24PM +0200, Laurent Pinchart wrote:
> >>> From: Hyun Kwon <hyun.kwon@xxxxxxxxxx>
> >>> 
> >>> The bindings describe the ZynqMP DP subsystem. They don't support the
> >>> interface with the programmable logic (FPGA) or audio yet.
> >>> 
> >>> Signed-off-by: Hyun Kwon <hyun.kwon@xxxxxxxxxx>
> >>> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >>> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> >> 
> >> Bikeshedding - examples with indent on 4 spaces to make them easier to
> >> read.
> >> 
> >> Would it be possible to make this binding: (GPL-2.0-only OR BSD-2-Clause)
> >> This is preferred for new bindings.
> >> In this case asking Hyun Kwon should be enough?
> > 
> > It should be possible. But to be safer and if needed, I need to check with
> > corperate policy before I can confirm.
> > 
> > Michal, have you already checked about adding 'OR BSD-2-Clause'? or should I
> > take it up to Xilinx legal?
> 
> Have you been able to get an answer on this ? I though the
> double-license was encouraged for new bindings, but it now seems to be a
> hard requirement to get them merged.

Gentle ping.

> >> With or without the suggestions above:
> >> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> >> 
> >> 	Sam
> >> 
> >>> ---
> >>> Changes since v10:
> >>> 
> >>> - Update example to new PHY DT bindings without subnodes
> >>> - Add resets property
> >>> 
> >>> Changes since v9:
> >>> 
> >>> - Fix constraints on clock-names
> >>> - Document dp_apb_clk as the APB clock, not the AXI clock
> >>> 
> >>> Changes since v8:
> >>> 
> >>> - Convert to yaml
> >>> - Rename aclk to dp_apb_clk
> >>> ---
> >>>  .../display/xlnx/xlnx,zynqmp-dpsub.yaml       | 174 ++++++++++++++++++
> >>>  1 file changed, 174 insertions(+)
> >>>  create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
> >>> 
> >>> diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
> >>> new file mode 100644
> >>> index 000000000000..05e6a14de75c
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
> >>> @@ -0,0 +1,174 @@
> >>> +# SPDX-License-Identifier: GPL-2.0
> >>> +%YAML 1.2
> >>> +---
> >>> +$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml#
> >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>> +
> >>> +title: Xilinx ZynqMP DisplayPort Subsystem
> >>> +
> >>> +description: |
> >>> +  The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC)
> >>> +  implements the display and audio pipelines based on the DisplayPort v1.2
> >>> +  standard. The subsystem includes multiple functional blocks as below:
> >>> +
> >>> +               +------------------------------------------------------------+
> >>> +  +--------+   | +----------------+     +-----------+                       |
> >>> +  | DPDMA  | --->|                | --> |   Video   | Video +-------------+ |
> >>> +  | 4x vid |   | |                |     | Rendering | -+--> |             | |   +------+
> >>> +  | 2x aud |   | |  Audio/Video   | --> | Pipeline  |  |    | DisplayPort |---> | PHY0 |
> >>> +  +--------+   | | Buffer Manager |     +-----------+  |    |   Source    | |   +------+
> >>> +               | |    and STC     |     +-----------+  |    | Controller  | |   +------+
> >>> +  Live Video --->|                | --> |   Audio   | Audio |             |---> | PHY1 |
> >>> +               | |                |     |   Mixer   | --+-> |             | |   +------+
> >>> +  Live Audio --->|                | --> |           |  ||   +-------------+ |
> >>> +               | +----------------+     +-----------+  ||                   |
> >>> +               +---------------------------------------||-------------------+
> >>> +                                                       vv
> >>> +                                                 Blended Video and
> >>> +                                                 Mixed Audio to PL
> >>> +
> >>> +  The Buffer Manager interacts with external interface such as DMA engines or
> >>> +  live audio/video streams from the programmable logic. The Video Rendering
> >>> +  Pipeline blends the video and graphics layers and performs colorspace
> >>> +  conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort
> >>> +  Source Controller handles the DisplayPort protocol and connects to external
> >>> +  PHYs.
> >>> +
> >>> +  The subsystem supports 2 video and 2 audio streams, and various pixel formats
> >>> +  and depths up to 4K@30 resolution.
> >>> +
> >>> +  Please refer to "Zynq UltraScale+ Device Technical Reference Manual"
> >>> +  (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf)
> >>> +  for more details.
> >>> +
> >>> +maintainers:
> >>> +  - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >>> +
> >>> +properties:
> >>> +  compatible:
> >>> +    const: xlnx,zynqmp-dpsub-1.7
> >>> +
> >>> +  reg:
> >>> +    maxItems: 4
> >>> +  reg-names:
> >>> +    items:
> >>> +      - const: dp
> >>> +      - const: blend
> >>> +      - const: av_buf
> >>> +      - const: aud
> >>> +
> >>> +  interrupts:
> >>> +    maxItems: 1
> >>> +
> >>> +  clocks:
> >>> +    description:
> >>> +      The APB clock and at least one video clock are mandatory, the audio clock
> >>> +      is optional.
> >>> +    minItems: 2
> >>> +    maxItems: 4
> >>> +    items:
> >>> +      - description: dp_apb_clk is the APB clock
> >>> +      - description: dp_aud_clk is the Audio clock
> >>> +      - description:
> >>> +          dp_vtc_pixel_clk_in is the non-live video clock (from Processing
> >>> +          System)
> >>> +      - description:
> >>> +          dp_live_video_in_clk is the live video clock (from Programmable
> >>> +          Logic)
> >>> +  clock-names:
> >>> +    oneOf:
> >>> +      - minItems: 2
> >>> +        maxItems: 3
> >>> +        items:
> >>> +          - const: dp_apb_clk
> >>> +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> >>> +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> >>> +      - minItems: 3
> >>> +        maxItems: 4
> >>> +        items:
> >>> +          - const: dp_apb_clk
> >>> +          - const: dp_aud_clk
> >>> +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> >>> +          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
> >>> +
> >>> +  power-domains:
> >>> +    maxItems: 1
> >>> +
> >>> +  resets:
> >>> +    maxItems: 1
> >>> +
> >>> +  dmas:
> >>> +    maxItems: 4
> >>> +    items:
> >>> +      - description: Video layer, plane 0 (RGB or luma)
> >>> +      - description: Video layer, plane 1 (U/V or U)
> >>> +      - description: Video layer, plane 2 (V)
> >>> +      - description: Graphics layer
> >>> +  dma-names:
> >>> +    items:
> >>> +      - const: vid0
> >>> +      - const: vid1
> >>> +      - const: vid2
> >>> +      - const: gfx0
> >>> +
> >>> +  phys:
> >>> +    description: PHYs for the DP data lanes
> >>> +    minItems: 1
> >>> +    maxItems: 2
> >>> +  phy-names:
> >>> +    minItems: 1
> >>> +    maxItems: 2
> >>> +    items:
> >>> +      - const: dp-phy0
> >>> +      - const: dp-phy1
> >>> +
> >>> +required:
> >>> +  - compatible
> >>> +  - reg
> >>> +  - reg-names
> >>> +  - interrupts
> >>> +  - clocks
> >>> +  - clock-names
> >>> +  - power-domains
> >>> +  - resets
> >>> +  - dmas
> >>> +  - dma-names
> >>> +  - phys
> >>> +  - phy-names
> >>> +
> >>> +additionalProperties: false
> >>> +
> >>> +examples:
> >>> +  - |
> >>> +    #include <dt-bindings/phy/phy.h>
> >>> +    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
> >>> +
> >>> +    display@fd4a0000 {
> >>> +      compatible = "xlnx,zynqmp-dpsub-1.7";
> >>> +      reg = <0x0 0xfd4a0000 0x0 0x1000>,
> >>> +            <0x0 0xfd4aa000 0x0 0x1000>,
> >>> +            <0x0 0xfd4ab000 0x0 0x1000>,
> >>> +            <0x0 0xfd4ac000 0x0 0x1000>;
> >>> +      reg-names = "dp", "blend", "av_buf", "aud";
> >>> +      interrupts = <0 119 4>;
> >>> +      interrupt-parent = <&gic>;
> >>> +
> >>> +      clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
> >>> +      clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
> >>> +
> >>> +      power-domains = <&pd_dp>;
> >>> +      resets = <&reset ZYNQMP_RESET_DP>;
> >>> +
> >>> +      dma-names = "vid0", "vid1", "vid2", "gfx0";
> >>> +      dmas = <&xlnx_dpdma 0>,
> >>> +             <&xlnx_dpdma 1>,
> >>> +             <&xlnx_dpdma 2>,
> >>> +             <&xlnx_dpdma 3>;
> >>> +
> >>> +      phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>,
> >>> +             <&psgtr 0 PHY_TYPE_DP 1 3 27000000>;
> >>> +
> >>> +      phy-names = "dp-phy0", "dp-phy1";
> >>> +    };
> >>> +
> >>> +...

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux