On Tue, Apr 14, 2020 at 10:52 PM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Arnd,
>
> On Tue, Apr 14, 2020 at 10:38:27PM +0200, Arnd Bergmann wrote:
> > On Tue, Apr 14, 2020 at 10:17 PM Laurent Pinchart wrote:
> > > On Wed, Apr 08, 2020 at 10:27:10PM +0200, Arnd Bergmann wrote:
> > > > The 'imply' statement does not seem to have an effect, as it's
> > > > still possible to turn the CMM code into a loadable module
> > > > in a randconfig build, leading to a link error:
> > > >
> > > > arm-linux-gnueabi-ld: drivers/gpu/drm/rcar-du/rcar_du_crtc.o: in function `rcar_du_crtc_atomic_enable':
> > > > rcar_du_crtc.c:(.text+0xad4): undefined reference to `rcar_lvds_clk_enable'
> > > > arm-linux-gnueabi-ld: drivers/gpu/drm/rcar-du/rcar_du_crtc.o: in function `rcar_du_crtc_atomic_disable':
> > > > rcar_du_crtc.c:(.text+0xd7c): undefined reference to `rcar_lvds_clk_disable'
> > > > arm-linux-gnueabi-ld: drivers/gpu/drm/rcar-du/rcar_du_drv.o: in function `rcar_du_init':
> > > > rcar_du_drv.c:(.init.text+0x4): undefined reference to `rcar_du_of_init'
> > > > arm-linux-gnueabi-ld: drivers/gpu/drm/rcar-du/rcar_du_encoder.o: in function `rcar_du_encoder_init':
> > > >
> > > > Remove the 'imply', and instead use a silent symbol that defaults
> > > > to the correct setting.
> > >
> > > This will result in the CMM always being selected when DU is, increasing
> > > the kernel size even for devices that don't need it. I believe we need a
> > > better construct in Kconfig to fix this.
> >
> > I had expected this to have the same meaning that we had before the
> > Kconfig change: whenever the dependencies are available, turn it on,
> > otherwise leave it disabled.
> >
> > Can you describe what behavior you actually want instead?
>
> Doesn't "imply" mean it gets selected by default but can be manually
> disabled ?
That may be what it means now (I still don't understand how it's defined
as of v5.7-rc1), but traditionally it was more like a 'select if all
dependencies
are met'.
> > > > --- a/drivers/gpu/drm/rcar-du/Kconfig
> > > > +++ b/drivers/gpu/drm/rcar-du/Kconfig
> > > > @@ -4,7 +4,6 @@ config DRM_RCAR_DU
> > > > depends on DRM && OF
> > > > depends on ARM || ARM64
> > > > depends on ARCH_RENESAS || COMPILE_TEST
> > > > - imply DRM_RCAR_CMM
> > > > imply DRM_RCAR_LVDS
> > > > select DRM_KMS_HELPER
> > > > select DRM_KMS_CMA_HELPER
> > > > @@ -15,9 +14,8 @@ config DRM_RCAR_DU
> > > > If M is selected the module will be called rcar-du-drm.
> > > >
> > > > config DRM_RCAR_CMM
> > > > - tristate "R-Car DU Color Management Module (CMM) Support"
> > > > + def_tristate DRM_RCAR_DU
> > > > depends on DRM && OF
> > > > - depends on DRM_RCAR_DU
> > > > help
> >
> > It would be easy enough to make this a visible 'bool' symbol and
> > build it into the rcu-du-drm.ko module itself. Would that help you?
>
> That could indeed simplify a few things. I wonder if it could introduce
> a few small issues though (but likely nothing we can't fix). The two
> that come to mind are the fact that the module would have two
> MODULE_DESCRIPTION and MODULE_LICENSE entries (I have no idea if that
> could cause breakages), and that it could make module unloading more
> difficult as the CMM being used by the DU would increase the refcount on
> the module. I think the latter could be worked around by manually
> unbinding the DU device through sysfs before unloading the module (and I
> can't say for sure that unloading the DU module is not broken today
> *innocent and naive look* :-)).
In that case, a Makefile trick could also work, doing
ifdef CONFIG_DRM_RCAR_CMM
obj-$(CONFIG_DRM_RCAR_DU) += rcar-cmm.o
endif
Thereby making the cmm module have the same state (y or m) as
the du module whenever the option is enabled.
Arnd
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
