Hi Paul. On Wed, Apr 08, 2020 at 11:58:29AM +0200, Paul Cercueil wrote: > Add support for multiple drm_display_mode entries. This will allow to > add a 50 Hz mode later. > > Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> Patch looks good. Could we please use lower case in the $subject? Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx> I asume you will apply yourself. Sam > --- > drivers/gpu/drm/panel/panel-novatek-nt39016.c | 33 +++++++++++++------ > 1 file changed, 23 insertions(+), 10 deletions(-) > > diff --git a/drivers/gpu/drm/panel/panel-novatek-nt39016.c b/drivers/gpu/drm/panel/panel-novatek-nt39016.c > index a470810f7dbe..f1286cf6528b 100644 > --- a/drivers/gpu/drm/panel/panel-novatek-nt39016.c > +++ b/drivers/gpu/drm/panel/panel-novatek-nt39016.c > @@ -49,7 +49,8 @@ enum nt39016_regs { > #define NT39016_SYSTEM_STANDBY BIT(1) > > struct nt39016_panel_info { > - struct drm_display_mode display_mode; > + const struct drm_display_mode *display_modes; > + unsigned int num_modes; > u16 width_mm, height_mm; > u32 bus_format, bus_flags; > }; > @@ -212,15 +213,22 @@ static int nt39016_get_modes(struct drm_panel *drm_panel, > struct nt39016 *panel = to_nt39016(drm_panel); > const struct nt39016_panel_info *panel_info = panel->panel_info; > struct drm_display_mode *mode; > + unsigned int i; > > - mode = drm_mode_duplicate(connector->dev, &panel_info->display_mode); > - if (!mode) > - return -ENOMEM; > + for (i = 0; i < panel_info->num_modes; i++) { > + mode = drm_mode_duplicate(connector->dev, > + &panel_info->display_modes[i]); > + if (!mode) > + return -ENOMEM; > + > + drm_mode_set_name(mode); > > - drm_mode_set_name(mode); > + mode->type = DRM_MODE_TYPE_DRIVER; > + if (panel_info->num_modes == 1) > + mode->type |= DRM_MODE_TYPE_PREFERRED; > > - mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > - drm_mode_probed_add(connector, mode); > + drm_mode_probed_add(connector, mode); > + } > > connector->display_info.bpc = 8; > connector->display_info.width_mm = panel_info->width_mm; > @@ -230,7 +238,7 @@ static int nt39016_get_modes(struct drm_panel *drm_panel, > &panel_info->bus_format, 1); > connector->display_info.bus_flags = panel_info->bus_flags; > > - return 1; > + return panel_info->num_modes; > } > > static const struct drm_panel_funcs nt39016_funcs = { > @@ -316,8 +324,8 @@ static int nt39016_remove(struct spi_device *spi) > return 0; > } > > -static const struct nt39016_panel_info kd035g6_info = { > - .display_mode = { > +static const struct drm_display_mode kd035g6_display_modes[] = { > + { > .clock = 6000, > .hdisplay = 320, > .hsync_start = 320 + 10, > @@ -330,6 +338,11 @@ static const struct nt39016_panel_info kd035g6_info = { > .vrefresh = 60, > .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, > }, > +}; > + > +static const struct nt39016_panel_info kd035g6_info = { > + .display_modes = kd035g6_display_modes, > + .num_modes = ARRAY_SIZE(kd035g6_display_modes), > .width_mm = 71, > .height_mm = 53, > .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > -- > 2.25.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel